Quick Info :
Size : 2.4 inch
Resolution : 240 x 320 pixel
Touch : Resistive
Suitable for an Uno (Atmega328P) or Mega (Atmega2560) based Arduinos (other chips are not supported)
Dimensions: 72.5 mm x 53 mm
Driver: ILI9320 or ILI9341 (or compatible with one of two)
Rs 1,780.00Rs 1,950.00
Quick Info :
Operating temperature range: -40 TO 85°CUART TTL socket
EEPROM to save configuration settings
Rechargeable battery for Backup
Supply voltage: 3.3 V
Rs 1,100.00Rs 1,800.00
Quick Info :
Range: 0-100V DC
Display: 0.28″ Red LED
Accuracy: ±1%
Wiring: Three-wire (separate power & signal)
Application: Battery/Solar/Automotive monitoring
Rs 280.00Rs 320.00
Quick Info :
WIDE SUPPLY RANGE: 2.0V to 5.5V
PROGRAMMABLE DATA RATE: 8SPS to 860SPS
Rs 650.00Rs 950.00
Quick Info :
Channel : 8
Coil Voltage : 5V DC
Trigger Logic : Active LOW
Contact Rating : 10A / 250VAC, 30VDC
Isolation : Optocoupler
Rs 1,100.00Rs 1,400.00
Quick Info :
Channel : 2
Coil sensitivity = 5VDC
Maximum Contact capacity = 250VAC/10VDC
Maximum Current capacity = 10A
Rs 350.00Rs 590.00
Quick Info :
Voltage Rating: 12V DC
Port Size In/Out: 3/4 inch
Normal State: Normally Close
Working Pressure Rating: 0.02 MPA to 0.8 MPA
Rs 1,090.00Rs 1,250.00
Quick Info :
Operating Voltage: DC 5V – 36V;
The trigger source: digital high-low (DC3.3V – 20V),
Output capacity: DC 5V – 36V,
Rs 250.00Rs 390.00
Quick Info :
Voltage: 3.3V, 5V
Output load voltage :0-24V
Output load current: <5A (1A need to add more heat sink)
Rs 180.00Rs 250.00
Quick Info :
Max. Operating Voltage: 45 V
Min. Operating Voltage: 8.2 V
Max. Current Per Phase: 2.5 A
Alternatives for DRV8825 : A4988 , TMC2209
Rs 400.00Rs 590.00
Quick Info:
Control Type : Bidirectional SCR (Thyristor)
Input Voltage : AC 220-230V, 50/60Hz
Output Voltage : AC 50V to 220V, adjustable
Maximum Power : 2000W (resistive load)
Maximum Current : Up to 25A
Rs 950.00Rs 1,250.00
Quick Info :
High Voltage Outputs: 50V
Inputs Compatible with Popular Logic Types (5V TTL – Arduino Compatible)
Relay Driver Applications
Rs 230.00Rs 390.00
Quick Info :
Input supply voltage: 6V-28VDC
The maximum output power: 80W
The maximum continuous output current : 3A
Rs 450.00
Quick Info :
Max. Operating Voltage: 35V
Min. Operating Voltage: 8V
Max. Current Per Phase: 2A
Alternatives for A4988 : DRV8825 , TMC2209
Rs 330.00
Quick Info :
Complies with wireless 802.11n standards
Frequency band: 2.4~2.4835GHz
Data rate up to 150Mbps
Rs 950.00Rs 1,250.00
Quick Info :
Operating voltage:5V (supplied from the Arduino Board)
Ethernet Controller: W5500 with internal 32K buffer
Connection speed: 10/100Mb
Connection with Arduino on SPI port
Rs 1,600.00
Quick Info :
Power Supply Voltage : 4.6V to 5.2V
Network Support : Quad-Band GSM/GPRS
Communication Interface : TTL UART
Peak Current Draw : Up to 1A or more
Rs 2,100.00Rs 2,200.00
Quick Info :
Voltage: 3-3.6V (recommended 3.3V) V.
Maximum output power: +20dBm.
Power-down mode current: 4.2uA.
Operating Range: 1Km
Rs 600.00Rs 850.00
Quick Info :
It can be used with NRF24L01 wireless module
Add core nRF24L01+ Breakout Adapter with onboard 3.3V Regulator
Onboard 3.3V voltage regulator accepts your Arduino +5V supply and provides 3.3V for the attached nRF24L01+ module
Allows for easy connection to nRF24L01+ modules
Small power on SMD LED indicator
Rs 200.00Rs 250.00
Quick Info:
Frequency Band : 2.4GHz to 2.525GHz
Data Rate : 250Kbps, 1Mbps, 2Mbps
Operating Voltage : 1.9V to 3.6V
Communication Range : Up to 100m (Open Air)
Rs 340.00Rs 490.00
Quick Info :
Bluetooth Version : V2.0+EDR
Operating Mode : Slave Only
Input Voltage : 3.6V to 6V
Logic Level : 3.3V
Default Baud Rate : 9600 bps
Range : Up to 10m (Open Area)
Rs 950.00Rs 1,350.00
Quick Info :
802.11 b/g/n
Operating Voltage: 3.3V
Wi-Fi Direct (P2P), soft-AP
Integrated TCP/IP protocol stack
Rs 490.00Rs 590.00
Quick Info :
ENC28J60 Ethernet chips, SOP28 package
SPI Interface
Single Supply: +3.3 V
Rs 990.00
Quick Info :
Transmitter Operating Voltage: +5V only
Transmitter Operating current: 9mA to 40mA
Operating frequency: 433 MHz
Transmission Distance: 2-3 meters (without antenna) to 5 meters (maximum)
Rs 390.00
Quick Info :
MFRC522 chip based board
Operating frequency: 13.56MHz
Supply Voltage: 3.3V
Current: 13-26mA
Rs 360.00Rs 430.00
Quick Info :
The working voltage: 5 ~ 12V
Output amplitude: 4.2V V-PP(5v input) to 11.4V V-PP(12V input).
Maximum output current: >=15mA (5V IN), >=35mA (12V IN)
Rs 250.00Rs 290.00
Quick Info :
Operating voltage : 2.3V – 5.5V
Battery not included
Battery : CR2032
Rs 1,050.00Rs 1,200.00
Quick Info:
Onboard chip AT24C256 chip
Onboard the I2C communications required pull-up resistor
All pins are leads and marked
PCB board Dimensions : 36.5 (mm) x12 (mm)
Rs 200.00Rs 390.00
Quick Info :
All SD SPI pins output, MOSI, SCK, MISO, and CS.
Support 5V/3.3V input.
This module can handle 2GB SD cards.
Rs 260.00Rs 350.00
Quick Info:
Interface : SPI (MISO, MOSI, SCK, CS)
Operating Voltage : 4.5V to 5.5V DC
Logic Level : 3.3V and 5V
Supported Cards : Micro SD (up to 2GB), Micro SDHC (up to 32GB)
Header : 6-pin
Rs 350.00
Quick Info:
Channels : 3
Operating Voltage : 4.8V to 6V DC
Output Signal : 1.5ms ± 0.5ms
Test Modes : Manual, Neutral, Automatic
Connectable Devices : Up to 3 servos or 3 ESCs
Rs 350.00Rs 450.00
Quick Info :
Compatible Sensor : HC-SR04 Ultrasonic Module
Material : Acrylic
Mounting Hole Diameter : 3.8mm
Mounting Hardware : Not included (M3 screws recommended)
Rs 120.00Rs 130.00
