Specification:
5mm Round Standard Directivity
Color : Red, Blue, Green, White, Yellow
UV Resistant : Eproxy
Forward Current (IF): 30mA
Forward Voltage (VF): 1.8V to 2.4V
Rs 5.00
Quick Info :
Credit Card Size, 13.56MHz, 1K Bytes Memory, ISO14443A, Read/Write protect by password, easy to program. Compatible with RC522 and PN532 readers. White card, card number not printed, No magnetic stripe, no holes. Each card individually packaged. Discounts applicable for more than 100 Card
Rs 60.00Rs 95.00
Quick Info :
Operating Voltage: DC 5V – 36V;
The trigger source: digital high-low (DC3.3V – 20V),
Output capacity: DC 5V – 36V,
Rs 250.00Rs 390.00
Quick Info :
Compatible Motor : TT DC Gearbox Motor
Outer Diameter : 65mm
Tyre Width : ~27mm
Shaft Hole : 5.3mm dia × 10mm depth
Hub Joint : Pentagonal (15mm)
Tyre Material : Rubber
Rim Material : High-strength plastic
Applications : Smart car, line follower, obstacle avoidance robot
Rs 100.00Rs 140.00
Quick Info :
4 channels can convert up to 4 logic signals
Can convert between 1.8V, 2.8V, 3.3V and 5V logic circuits
Bi-directional so can work with bi-directional buses such as I2C
Utilizes N-Ch MOSFET transistors for level translation
Rs 100.00Rs 150.00
Quick Info :
IC Chipset : MAX485
Operating Voltage : 5V DC
Communication Standard : RS-485 (EIA-485)
Max Nodes on Bus : 32 Transceivers
Max Communication Distance : Up to 1200m
Rs 200.00Rs 220.00
Quick Info :
Voltage Rating: 12V DC
Port Size In/Out: 3/4 inch
Normal State: Normally Close
Working Pressure Rating: 0.02 MPA to 0.8 MPA
Rs 1,090.00Rs 1,250.00
Quick Info :
Input Voltage: 6 ~ 27V
Driver: Dual BTS7960 H Bridge Configuration
Peak current: 43-Amp
Rs 1,250.00
Quick Info :
IC Chip : PCF8574 / PCF8574T
Compatible Displays : 1602 (16×2) & 2004 (20×4) LCD Modules
I2C Address : 0x20 to 0x27 (jumper selectable)
Operating Voltage : 2.5V to 6V
Rs 200.00Rs 390.00
Quick Info :
Data transfer rates from 300 baud to 3 Mbaud (RS422, RS485, RS232) at TTL levels.
Integrated +3.3V level converter for USB I/O
Integrated level converter on UART and CBUS for interfacing to between +1.8V and +5V logic.
Rs 400.00Rs 590.00
Quick Info :
Fully compliant USB 2.0 standard, backward compatible with USB1.1
Support System: Windows XP, Vista, Windows 7, Linux, MacOS, and WinCE5.0 drive
Supports Plug, Play and hot-swap ( USB side) ;
Rs 450.00Rs 500.00
Quick Info:
Module Type : LED Traffic Light Module
Operating Voltage : 5V DC
LED Colors : Red, Yellow, Green
Application : STEM Education, Arduino Projects
Rs 120.00Rs 150.00
Quick Info:
Display Format : 16 Characters x 2 Lines
Backlight Color : Blue
Supply Voltage : 5V DC
Rs 400.00Rs 450.00
Quick Info:
Compatible Package : SOIC-8 / SOP8
Output Format : DIP-8
SMD Pad Pitch : 1.27mm
DIP Pin Pitch : 2.54mm
PCB Material : FR4
PCB Dimensions : 19mm x 14mm (approx.)
Surface Finish : HASL
Rs 50.00Rs 80.00
Quick Info :
Rated Voltage: 5.0VDC
Operating Voltage: 3.0-6.0VDC
Rated Speed: Minimum 9000 rpm
Rs 290.00Rs 300.00
Quick info :
Operating voltage: 6 – 30V DC
1 Channel delay triggered relay module
Delay time: 0.1 second to 999 minutes
Rs 420.00Rs 590.00
Quick Info:
Frequency Band : 2.4GHz to 2.525GHz
Data Rate : 250Kbps, 1Mbps, 2Mbps
Operating Voltage : 1.9V to 3.6V
Communication Range : Up to 100m (Open Air)
Rs 340.00Rs 490.00
Quick Info :
Channel : 2
Coil sensitivity = 5VDC
Maximum Contact capacity = 250VAC/10VDC
Maximum Current capacity = 10A
Rs 350.00Rs 590.00
Quick Info:
Control Type : Bidirectional SCR (Thyristor)
Input Voltage : AC 220-230V, 50/60Hz
Output Voltage : AC 50V to 220V, adjustable
Maximum Power : 2000W (resistive load)
Maximum Current : Up to 25A
Rs 950.00Rs 1,250.00
Quick Info :
It can be used with NRF24L01 wireless module
Add core nRF24L01+ Breakout Adapter with onboard 3.3V Regulator
Onboard 3.3V voltage regulator accepts your Arduino +5V supply and provides 3.3V for the attached nRF24L01+ module
Allows for easy connection to nRF24L01+ modules
Small power on SMD LED indicator
Rs 200.00Rs 250.00
Quick Info:
Input Voltage : 3.3V to 5V DC
Output Signal : 2 analog (X, Y) + 1 digital (switch)
Pin Interface : VCC, GND, VRx, VRy, SW
Dimensions : 34mm x 26mm x 32mm
Rs 200.00Rs 250.00
Quick Info :
Channel : 4
Coil sensitivity = 5VDC
Maximum Contact capacity = 250VAC/10VDC
Maximum Current capacity = 10A
Rs 590.00Rs 790.00
Quick Info :
Driver IC : TM1637
Display Type : 4-digit 7-segment LED
Digit Size : 0.36 inch
Interface : 2-wire serial (CLK, DIO)
Operating Voltage : 3.3V to 5V DC
Rs 200.00Rs 390.00
Quick Info :
Max. Operating Voltage: 35V
Min. Operating Voltage: 8V
Max. Current Per Phase: 2A
Alternatives for A4988 : DRV8825 , TMC2209
Rs 330.00
Quick Info :
Name: TT motor
Type: 1:48
Speed: 45±10%r/min 90±10%r/min
Rated voltage: 3V/6V
Rs 350.00
Quick Info :
Type: Ball Caster Wheel
Ball Material: 304 Stainless Steel
Dimensions: 22mm x 15mm
Weight: 10g
Application: Mini robots, RC cars
Rs 180.00Rs 250.00
Quick Info :
Connector : USB Type-C
Output Type : DIP 2.54 mm
Use Case : Breadboard & PCB Prototyping
Material : FR-4 PCB
Rs 120.00Rs 250.00
Quick Info :
Voltage: 3-3.6V (recommended 3.3V) V.
Maximum output power: +20dBm.
Power-down mode current: 4.2uA.
Operating Range: 1Km
Rs 600.00Rs 850.00
Quick Info :
Operating voltage : 2.3V – 5.5V
Battery not included
Battery : CR2032
Rs 1,050.00Rs 1,200.00
Quick Info :
WIDE SUPPLY RANGE: 2.0V to 5.5V
PROGRAMMABLE DATA RATE: 8SPS to 860SPS
Rs 650.00Rs 950.00
Quick Info :
Compatible Sensor : HC-SR04 Ultrasonic Module
Material : Acrylic
Mounting Hole Diameter : 3.8mm
Mounting Hardware : Not included (M3 screws recommended)
Rs 120.00Rs 130.00
Quick info :
Model: TTP223.
Dimensions: 15mm x 11mm.
Input Voltage: 2 Volt – 5.5 Volts DC.
Rs 60.00
