Current
Current, voltage and power sensors: INA219, INA226, ACS712 5A, 20A and 30A, PZEM-004T AC energy meter, ZMPT101B AC voltage and TA12 current transformers.
-
5A Overcurrent Protection Sensor Module with 12V Relay Switch
Quick info :
- Operating voltage: DC12V;
- Operating current: <20MA;
- Operating frequency range: 20Hz ~ 400Hz;
- Output mode: switch signal output;
- Maximum detection wire diameter: 5.2mm;
Rs 950.00 -
AC Current Sensor 5A Module TA12-100
Quick Info :
- Type : Sensor Brick
- Model: TA12-100
- Interface : 3PIN
- Power Supply : 5V
- Board Size : 30 × 24 × 1.6mm
Rs 950.00AC Current Sensor 5A Module TA12-100
Rs 950.00 -
INA219 Bi Directional Current Sensor Module
Quick Info :
- Power Input : 3.0V-5.5V
- Up to +26V target voltage
- 0.1 ohm 1% 2W current sense resistor
Rs 420.00Rs 950.00INA219 Bi Directional Current Sensor Module
Rs 420.00Rs 950.00 -
MAX471 Current and Voltage Sensor
Quick Info :
- Test Voltage range: DC3 – 25V (on 5V) or DC3 – 16.5V (on 3.3V)
- Monitors Both Charge and Discharge
- Complete High-Side Current Sensing
- Current Sensing up to 3A
Rs 1,950.00MAX471 Current and Voltage Sensor
Rs 1,950.00 -
Multifunctional Digital Energy Power Meter D52-2066
Quick Info :
- Type: Digital Power Meter
- Current Range: 0-100A
- Voltage: 40-300V AC
- Max. Power: 30000W
- Installation: DIN-rail
Rs 3,800.00Rs 4,500.00Multifunctional Digital Energy Power Meter D52-2066
Rs 3,800.00Rs 4,500.00 -
SCT-013 Split Core AC Current Transformer
Quick Info:
- Model : SCT-013
- Rated Input Current : 30A / 50A / 100A (variant dependent)
- Output Signal : 1V AC (30A & 50A) / 50mA AC (100A)
- Accuracy : ±1%
- Operating Frequency : 50Hz / 60Hz
- Core Type : Split Core (Open-Close)
- Connector : 3.5mm Audio Jack
Price range: Rs 1,500.00 through Rs 1,750.00 -
AC Digital Power Meter Module PZEM-004T V4.0 100A
Quick Info :
- Max Current: 100A (with external CT)
- Voltage Range: 80∼260V AC
- Communication: TTL to RS485 / Modbus-RTU
- Measured Parameters: 6 (V, I, P, Freq, PF, E)
- Alarm: Over Power Alarm
Rs 2,950.00Rs 3,250.00AC Digital Power Meter Module PZEM-004T V4.0 100A
Rs 2,950.00Rs 3,250.00 -
ACS712 20A Current Sensor Module
Quick Info :
- The current sensor chip : ACS712
- Current measuring : up to 20A
- 5V power supply, on-board power indicator
Rs 350.00Rs 550.00ACS712 20A Current Sensor Module
Rs 350.00Rs 550.00 -
ACS712 30A Current Sensor Module
Quick Info :
- The current sensor chip : ACS712
- Current measuring : up to 30A
- 5V power supply, on-board power indicator
Rs 400.00Rs 550.00ACS712 30A Current Sensor Module
Rs 400.00Rs 550.00 -
ACS712 5A Current Sensor Module
Quick Info :
- The current sensor chip : ACS712
- Current measuring : up to 5A
- 5V power supply, on-board power indicator
Rs 350.00Rs 550.00ACS712 5A Current Sensor Module
Rs 350.00Rs 550.00 -
Digital Adjustable AC Voltage Current Protector
Quick Info :
- Type: Over & Under Voltage Protector
- Model: AVR40
- Rated Current: 1-40A
- Rated Voltage: 220V AC
- Installation: DIN Rail
Rs 2,990.00Rs 3,500.00Digital Adjustable AC Voltage Current Protector
Rs 2,990.00Rs 3,500.00 -
INA226 Bi-Directional Current Module I2C
Quick Info :
- Senses Bus Voltages : 0 V to 36 V
- High-Side or Low-Side Sensing
- Reports Current, Voltage, and Power
- Operates from 2.7-V to 5.5-V Power Supply
Rs 590.00Rs 900.00INA226 Bi-Directional Current Module I2C
Rs 590.00Rs 900.00 -
USB Power Analyzer
Quick Info :
- Input voltage reading: 3.5~9V +/-1%
- Current output reading: 0.3~3A +/-1%
- Dimensions : 72 x 23 13.5 mm
Rs 1,950.00USB Power Analyzer
Rs 1,950.00 -
ZMPT101B AC Voltage Sensor Module Single Phase
Quick Info :
- Measures AC voltage up to 250V
- Built-in ZMPT101B voltage transformer (1000:1000 ratio)
- High galvanic isolation up to 4000V for safety
- Wide supply voltage: 5V to 30V DC
- Compatible with Arduino, ESP8266, Raspberry Pi
- Adjustable analog output for versatile applications
Rs 590.00
Sensors for measuring how much power a circuit uses: INA219 and INA226 I2C sensors that read DC current and voltage precisely, ACS712 Hall-effect modules in 5A, 20A and 30A ranges, the PZEM-004T and D52 meters for AC energy monitoring, the ZMPT101B for AC voltage and the TA12-100 current transformer. For battery and solar projects, the INA219 or INA226 gives the most accurate readings. AC sensors connect to mains, so mount them in an enclosure.