Quick Info :
Name: TT motor
Type: 1:48
Speed: 45±10%r/min 90±10%r/min
Rated voltage: 3V/6V
Rs 350.00
Quick Info :
Channel : 4
Coil sensitivity = 5VDC
Maximum Contact capacity = 250VAC/10VDC
Maximum Current capacity = 10A
Rs 590.00Rs 790.00
Quick Info :
Number of Keys : 4 (1 x 4)
Keypad Type : Flexible membrane switch
Connector : 5-pin female, 2.54mm pitch
Maximum Rating : 35V DC, 100mA
Mounting : Self-adhesive backing
Rs 250.00
Quick Info :
Arduino and Raspberry Pi compatible
16-key membrane switch pad has 8 pin female header on end of flat cable
White sticker on back can be peeled off for adhesive mounting
Rs 200.00Rs 290.00
Quick Info :
12-key membrane switch pad has 7 pin female header on end of flat cable
White sticker on back can be peeled off for adhesive mounting
Rs 250.00
Quick Info:
Input Voltage : 3.3V to 5V DC
Output Signal : 2 analog (X, Y) + 1 digital (switch)
Pin Interface : VCC, GND, VRx, VRy, SW
Dimensions : 34mm x 26mm x 32mm
Rs 200.00Rs 250.00
Quick Info :
uses the 5050 full-color LED
Operating voltage: 5V
by adjusting the three primary colors can be mixed PWM get different colors
Rs 100.00
Quick Info:
Display Format : 20 Characters x 4 Lines
Controller : HD44780 (or Compatible)
Backlight Color : Blue
Supply Voltage : 5V DC
Rs 1,020.00Rs 1,250.00
Quick Info :
Driver IC : TM1637
Display Type : 4-digit 7-segment LED
Digit Size : 0.36 inch
Interface : 2-wire serial (CLK, DIO)
Operating Voltage : 3.3V to 5V DC
Rs 200.00Rs 390.00
Quick Info :
Display Size: 1.3 inches
Matrix: 8 × 8 (64 LEDs)
Driver IC: MAX7219
Operating Voltage: 5 V
A single module can drive 8 x 8 common cathodes
Rs 550.00Rs 600.00
Quick Info :
IC Chip : PCF8574 / PCF8574T
Compatible Displays : 1602 (16×2) & 2004 (20×4) LCD Modules
I2C Address : 0x20 to 0x27 (jumper selectable)
Operating Voltage : 2.5V to 6V
Rs 200.00Rs 390.00
Quick Info:
Display Format : 16 Characters x 2 Lines
Backlight Color : Blue
Supply Voltage : 5V DC
Rs 400.00Rs 450.00
Quick Info :
Module Size: 2.8cm * 1.3cm
Applicable connector: 5.5 * 2.1mm
Power output interface: 2 channel VCC, 2 channel GND
Net Weight: 3.2g
Rs 100.00
Quick Info :
USB Type : Micro USB
Header : 2.54mm
Material : Plastic
Size(L*W) : Approx. 26.06 x 22.93mm
Rs 60.00
Quick Info :
Connector Type : USB Type B Female Socket
Breakout Pins : VBUS, D+, D-, GND
Pin Pitch : 2.54mm
Mounting Style : DIP / Through-Hole
Rs 100.00
Quick Info :
IC Chipset : MAX485
Operating Voltage : 5V DC
Communication Standard : RS-485 (EIA-485)
Max Nodes on Bus : 32 Transceivers
Max Communication Distance : Up to 1200m
Rs 200.00Rs 220.00
Quick Info :
Built-in USB to TTL Transfer chip.
Designed to be used for USB to TTL electronic projects.
TTL interface output. easy to connect to your MCU.
Rs 490.00Rs 550.00
Quick Info :
Fully compliant USB 2.0 standard, backward compatible with USB1.1
Support System: Windows XP, Vista, Windows 7, Linux, MacOS, and WinCE5.0 drive
Supports Plug, Play and hot-swap ( USB side) ;
Rs 450.00Rs 500.00
Quick Info :
Total Resistance : 10KΩ
Wiper Tap Positions : 100
Step Resolution : ~101Ω per Step
Operating Voltage : 3V – 5V DC
Memory Type : Non-Volatile
Rs 640.00Rs 750.00
Quick Info :
IC : HX711 (24-bit delta-sigma ADC)
Input Channels : 2 differential (Ch. A & Ch. B)
Programmable Gain : 32 / 64 / 128
Output Data Rate : 10 SPS / 80 SPS (selectable)
Operating Voltage : 2.7V – 5V DC
Operating Current : < 1.5mA
Interface : 2-wire (SCK + DT)
Operating Temp : -20°C to +85°C
Compatible Boards : Arduino / ESP32 / Raspberry Pi / STM32
Rs 240.00Rs 290.00
Quick Info :
Standard USB type A male and TTL 5 pin connector.
5 pins for 3.3V, TXD, RXD, GND & 5V.
Baud rates: 300 bps to 1.5 Mbps
Rs 790.00Rs 850.00
Quick Info :
Data transfer rates from 300 baud to 3 Mbaud (RS422, RS485, RS232) at TTL levels.
Integrated +3.3V level converter for USB I/O
Integrated level converter on UART and CBUS for interfacing to between +1.8V and +5V logic.
Rs 400.00Rs 590.00
Quick Info :
4 channels can convert up to 4 logic signals
Can convert between 1.8V, 2.8V, 3.3V and 5V logic circuits
Bi-directional so can work with bi-directional buses such as I2C
Utilizes N-Ch MOSFET transistors for level translation
Rs 100.00Rs 150.00
Quick Info :
Resolution 640×480 VGA
Flicker (50/60 Hz) auto detection
Onboard regulator, only single 3.3V supply needed
Rs 680.00Rs 925.00
Quick Info :
Maximum output power: 3W*2(5V 4Ω)
Built with switch Potentiometer
Rs 290.00Rs 320.00
Quick Info :
18 W mono amplifier circuit design
On-board 10K potentiometer for volume adjustment
Operating Voltage Range: 6 V to 12 V
Rs 290.00
Quick Info :
5W Output at 10% (Total Harmonic Distortion
3W Output at 10% THD with a 4Ω Load and 5V Power Supply
Rs 290.00Rs 390.00
Quick Info:
Supply Voltage: 5VDC
3W Output at 10% THD with a 4Ω Load and 5V Power Supply
Rs 130.00
