Quick Info:
Operating Voltage : 3.3V – 5V DC
Output Type : Digital (4 channels)
Detection Method : Infrared reflectance
Number of Sensors : 4
Detection Distance : 1mm – 8mm
Sensitivity Adjust : Yes, onboard potentiometer
Dimensions : 75mm x 16mm
Rs 590.00Rs 650.00
Specifications :
Operating voltage : 4.5 V to 5.5 V
Output type : Analog Voltage
Distance measuring range : 10 cm to 80 cm (4″ to 32″)
Rs 1,990.00
Quick Info :
Sensor Type: Infrared photoelectric encoder
Resolution: 20 pulses per revolution
Output: Digital TTL pulse
Voltage: 3.3V – 5V DC
Pins: VCC, GND, OUT (3-pin)
Disk Slots: 20 slots
Compatible: Arduino, ESP32, Raspberry Pi
Rs 420.00Rs 500.00
Quick Info:
Receiver IC : HX1838
Supply Voltage : 2.7V – 5.5V
Carrier Frequency : 38 kHz
Interface : 3-Pin (VCC, GND, OUT)
Protocol Support : NEC, RC5, RC6 and others
Rs 180.00Rs 200.00
Quick Info :
Power Supply Voltage : 5V
Size : 27 * 17mm
Communication Type : serial port communication (TTL level)
Rs 650.00Rs 750.00
Quick Info :
Working Voltage : 3.3v to 5v
Detectable Distance : 2 ~ 30cm,
Detection angle : 35 °
Comparator chip: LM393
Rs 180.00
Quick Info:
Operating Voltage : 3.3V – 5V DC
Carrier Frequency : 38kHz
Remote Buttons : 21
Effective Range : Up to 8 metres
Reception Angle : ~45°
Output Type : Digital
Compatibility : Arduino, Raspberry Pi, ESP32
Rs 290.00Rs 350.00
Quick Info :
Working voltage: 3.3V~5V
The output form: Digital switching outputs. (0 and 1)
Pin Configuration : VCC, GND, Dout and Aout
Rs 250.00
Quick Info :
Type: IR Transmitter + Receiver Pair
LED Size: 5mm
Detection Range: Approx 50cm
Voltage: 3.3-5V DC
Output: Digital Signal
Rs 630.00Rs 750.00
Quick Info :
Wavelength Sensitivity : 850nm
Case Material : Black epoxy for enhanced IR filtering
Package Type : ,5mm
Operating Voltage : 2.7V – 5.5V
Current Consumption : ≤1.5mA (typical)
Reception Distance : 10m – 30m (depends on model)
Carrier Frequency : 30kHz – 56kHz
Rs 30.00
Quick Info :
Wavelength Sensitivity : 850nm – 950nm (typically 940nm)
Operating Voltage : 2.7V – 5.5V
Current Consumption : ≤1.5mA (typical)
Reception Distance : 10m – 30m (varies by model)
Carrier Frequency : 30kHz – 56kHz
Rs 40.00
Quick Info :
Operating Voltage: 5V
Current Consumption: 30-60mA
Frequency: 38kHz
Wavelength: 940nm
Rs 190.00Rs 220.00
Quick Info:
Operating Voltage : 3.3V – 5V DC
Output Type : Digital
Detection Method : Infrared optical interrupt
Slot Width : ~5mm
Onboard Indicator : Yes
Compatibility : Arduino, Raspberry Pi, ESP32
Dimensions : 32mm x 14mm
Rs 240.00Rs 290.00
Quick Info :
Chip type: VS1838B
Operating Voltage: 3.3V to 5V
Current Consumption: 1.5mA peak
Receiving angle: 90 °
Reception distance: 17m
Rs 220.00
Quick Info:
Sensor Type : IR Obstacle Avoidance
Output Type : Digital (HIGH / LOW)
Operating Voltage : 3.3V – 5V DC
Detection Range : 2cm – 10cm [20-40cm Ideal conditions]
Sensitivity Adjustment : Dual Potentiometer
Enable Pin : Yes (active LOW)
Pins : 4 (VCC, GND, OUT, EN)
Rs 260.00Rs 300.00
Quick Info:
Operating Voltage : 3.3V – 5V DC
Output Type : Digital
Detection Method : Infrared reflectance
Detection Distance : 1mm – 8mm
Sensitivity Adjust : Yes, onboard potentiometer
Compatibility : Arduino, Raspberry Pi, ESP32
Dimensions : 32mm x 14mm
Rs 220.00Rs 250.00
Quick Info :
Sensor Type: Infrared reflective sensor
Sensor Model: TCRT5000
Number of Channels: 5
Operating Voltage: 3.3 V – 5 V
Rs 680.00Rs 850.00
Quick Info :
Dimensions: 2.95″ x 0.5″ x 0.125″ (without header pins installed)
Operating voltage: 3.3-5.0 V
Supply current: 100 mA
Output format: 8 digital I/O-compatible signals that can be read as a timed high pulse
Rs 730.00Rs 1,290.00
