Best Seller Items
-
1K – 100K Potentiometer
Quick Info :
- 1K, 5K, 10K, 50K, 100K Ohm
- Linear taper, carbon film type
- Single-Turn
Rs 30.00 – Rs 100.001K – 100K Potentiometer
Rs 30.00 – Rs 100.00 -
-
ESP8266 ESP-01 WIFI module
Quick Info :
- 802.11 b/g/n
- Operating Voltage: 3.3V
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
Rs 590.00ESP8266 ESP-01 WIFI module
Rs 590.00 -
NodeMCU Wi-Fi Development Board
Quick Info :
- Microcontroller: ESP8266
- Operating Voltage: 3.3V
- Input Voltage: 7-12V
- Digital I/O Pins (DIO): 16
- Analog Input Pins (ADC): 1
Rs 1,150.00Rs 1,450.00NodeMCU Wi-Fi Development Board
Rs 1,150.00Rs 1,450.00 -
TP5000 Battery Charging Module
Quick info:
- Charges both Li-ion (4.2V) and LiFePO4 (3.6V) batteries
- Adjustable charging current: 0.5A to 2A (default 1A)
- Embedded switching regulator for efficient charging
- LED indicators: Red (charging), Green (complete)
- Multiple protection circuits: overcurrent, over-discharge, overvoltage
- Compact design with heat dissipation pad
- Easy voltage switching via F solder pad connection
Rs 390.00TP5000 Battery Charging Module
Rs 390.00 -
ESP32 S3 DevKitC-1 N16R8
Quick info:
- N16R8: 16 MB Flash and 8 MB PSRAM.
- Dual-Core Xtensa® LX7 Processor – Runs at up to 240 MHz for high-performance computing.
- Wi-Fi 4 & Bluetooth 5 (LE) – Supports 2.4 GHz Wi-Fi and Bluetooth Low Energy (BLE) for wireless connectivity.
- Dual USB-C Ports:
- One for power and USB-to-UART bridge communication for easy programming.
- One for native USB functionality, supporting USB OTG, device emulation, or USB mass storage applications.
Rs 2,290.00Rs 2,490.00ESP32 S3 DevKitC-1 N16R8
Rs 2,290.00Rs 2,490.00
-
TP4056 Lithium Battery Charger Module V2
Quick Info :
- Input Interface: Micro USB port
- Charging method: linear charge.
- A full charge voltage: 4.2V.
Rs 60.00Rs 190.00TP4056 Lithium Battery Charger Module V2
Rs 60.00Rs 190.00 -
Rs 1,250.00
LM2596/LM2577 Based Buck/Boost 15W Module
Rs 1,250.00 -
AC-DC 12V 5A SMPS Metal Casing
Quick info :
Input Voltage : AC100 ~ 240V 50/60 HZ
Output Voltage: DC12V
Output Current: 5ARs 1,490.00Rs 1,690.00AC-DC 12V 5A SMPS Metal Casing
Rs 1,490.00Rs 1,690.00 -
AC-DC 5V 2A SMPS Power Adapter
Quick Info :
- Input Voltage : AC 100 ~ 240V 50/60 HZ
- Output Voltage: DC 5V
- Output Current: 2A
- Plug Type : UK Plug
Rs 590.00AC-DC 5V 2A SMPS Power Adapter
Rs 590.00 -
AC-DC 12V 1.5A SMPS Open
Quick Info :
Input Voltage : AC100 ~ 240V 50/60 HZ
Output Voltage: DC12V
Output Current: 1.5ARs 450.00AC-DC 12V 1.5A SMPS Open
Rs 450.00 -
-
-
Rs 690.00
Rs 890.00MG90S Tower Pro Micro Servo Metal
Rs 690.00Rs 890.00 -
-
15A 400W MOSFET Trigger Switch Drive Module
Quick Info :
- Operating Voltage: DC 5V – 36V;
- The trigger source: digital high-low (DC3.3V – 20V),
- Output capacity: DC 5V – 36V,
Rs 390.00 -
IRF520 MOSFET Driver Module
Quick Info :
- Voltage: 3.3V, 5V
- Output load voltage :0-24V
- Output load current: <5A (1A need to add more heat sink)
Rs 250.00IRF520 MOSFET Driver Module
Rs 250.00 -
-
Mini DC 3A Motor PWM Speed Controller
Quick Info :
- Operating Voltage: DC 4.5V-35V
- Control Power: 90W (maximum)
- Size: 30mm x 26mm x 14mm (Without Handle)
Rs 290.00Mini DC 3A Motor PWM Speed Controller
Rs 290.00 -
ULN2003 Stepper Motor Driver Board Module
Quick Info :
- High Voltage Outputs: 50V
- Inputs Compatible with Popular Logic Types (5V TTL – Arduino Compatible)
- Relay Driver Applications
Rs 230.00Rs 390.00ULN2003 Stepper Motor Driver Board Module
Rs 230.00Rs 390.00 -
PWM DC 6V – 28V 3A Motor Speed Controller
Quick Info :
- Input supply voltage: 6V-28VDC
- The maximum output power: 80W
- The maximum continuous output current : 3A
Rs 450.00 -
L298N Motor Driver Module
Quick Info
- Operating Voltage : 5 V to 35 V
- Great for 2 Gear motors
- Compatible Motor and Wheel : DC Gear Motor With Plastic Wheel
Rs 460.00Rs 590.00L298N Motor Driver Module
Rs 460.00Rs 590.00 -
L293D Motor Driver Module
Quick Info :
- Operating Voltage – 4.5 V to 36V.
- Compatible with Arduino Uno and Mega
- Compatible Motor and Wheel : DC Gear Motor With Plastic Wheel
Rs 560.00Rs 750.00L293D Motor Driver Module
Rs 560.00Rs 750.00 -
-
SIM900 GSM GPRS Shield
Quick Info :
- Compatible with standard Arduino and Arduino Mega
- Selectable interface between hardware serial port and software serial port
- Support TCP/UDP protocols
Rs 4,100.00SIM900 GSM GPRS Shield
Rs 4,100.00 -
W5100 Arduino Compatible Ethernet Shield
Quick Info :
- Operating voltage:5V (supplied from the Arduino Board)
- Ethernet Controller: W5500 with internal 32K buffer
- Connection speed: 10/100Mb
- Connection with Arduino on SPI port
Rs 4,390.00W5100 Arduino Compatible Ethernet Shield
Rs 4,390.00 -
NRF24L01 2.4GHz Transceiver With Antenna
Quick Info :
- Voltage: 3-3.6V (recommended 3.3V) V.
- Maximum output power: +20dBm.
- Power-down mode current: 4.2uA.
- Operating Range: 1Km
Rs 950.00NRF24L01 2.4GHz Transceiver With Antenna
Rs 950.00 -
NRF24L01 2.4GHz Transceiver Adapter Base
Quick Info :
- It can be used with NRF24L01 wireless module
- Add core nRF24L01+ Breakout Adapter with onboard 3.3V Regulator
- Onboard 3.3V voltage regulator accepts your Arduino +5V supply and provides 3.3V for the attached nRF24L01+ module
- Allows for easy connection to nRF24L01+ modules
- Small power on SMD LED indicator
Rs 250.00NRF24L01 2.4GHz Transceiver Adapter Base
Rs 250.00 -
NRF24L01 2.4GHz Transceiver
QUICK OVERVIEW
- Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability,
- Built-in hardware CRC error detection, Multipoint communication address control.
- Low-power 1.9 ~ 3.6V, only 1uA on Power down mode
- Built-in 2.4Ghz antenna
- Built-in voltage regulator
Rs 490.00NRF24L01 2.4GHz Transceiver
Rs 490.00 -
HC06 Wireless Bluetooth Module
Quick Info :
- Bluetooth v2.0+EDR
- 2.4GHz ISM band frequency
- Default baudrate: 9600
- Power supply: 3.6V to 6V DC
Rs 1,090.00Rs 1,350.00HC06 Wireless Bluetooth Module
Rs 1,090.00Rs 1,350.00 -
HC05 Wireless Bluetooth Module
Quick Info:
- Bluetooth v2.0+EDR
- 2.4GHz ISM band frequency
- Supported baud rate: 9600 (default), 19200,38400, 57600, 115200, 230400, 460800.
- Speed: Asynchronous: 2.1Mbps(Max) / 160 kbps, Synchronous: 1Mbps/1Mbps
- Power supply: 3.6V to 6V DC
Rs 1,090.00Rs 1,350.00HC05 Wireless Bluetooth Module
Rs 1,090.00Rs 1,350.00 -
433Mhz Transmitter and Receiver
Quick Info :
- Transmitter Operating Voltage: +5V only
- Transmitter Operating current: 9mA to 40mA
- Operating frequency: 433 MHz
- Transmission Distance: 3 meters (without antenna) to 100 meters (maximum)
Rs 390.00433Mhz Transmitter and Receiver
Rs 390.00 -
MFRC522 RFID Reader Module
Quick Info :
- MFRC522 chip based board
- Operating frequency: 13.56MHz
- Supply Voltage: 3.3V
- Current: 13-26mA
Rs 430.00MFRC522 RFID Reader Module
Rs 430.00 -
SD Card Reader Module
Quick Info :
- All SD SPI pins output, MOSI, SCK, MISO, and CS.
- Support 5V/3.3V input.
- This module can handle 2GB SD cards.
Rs 350.00SD Card Reader Module
Rs 350.00 -
Micro SD card reader module
Quick Info:
- Control Interface: GND, VCC, MISO, MOSI, SCK, CS
- Size: 45 x 28mm
- Net weight: 6g
Rs 350.00Micro SD card reader module
Rs 350.00 -
-
Plastic Wheel + Gear Motor
Quick Info :
- Name: TT motor
- Type: 1:48
- Speed: 45±10%r/min 90±10%r/min
- Rated voltage: 3V/6V
Rs 350.00Plastic Wheel + Gear Motor
Rs 350.00 -
-
-
4 channel 5V DC Relay Module
Quick Info :
- Channel : 4
- Coil sensitivity = 5VDC
- Maximum Contact capacity = 250VAC/10VDC
- Maximum Current capacity = 10A
Rs 790.004 channel 5V DC Relay Module
Rs 790.00