Quick Info :
Voltage : 12V DC
Thickness : 3mm
Length: 64mm
Power Consumption : Low Power
Waterproof Rating : IP65 (Water-Resistant)
Package only contains 1 strip
Rs 60.00
Quick info :
Model: TCS3472
Communication: I2C
Dimensions: 20.44mm / 0.8″ x 20.28mm / 0.79″
Rs 990.00Rs 1,100.00
Quick Info
Voltage: 4.5-12 V DC
Current: 0.6 A
Size: 53×26×23 mm
Latch travel: 10 mm
Rs 1,450.00Rs 1,590.00
Quick Info :
The working voltage: 5 ~ 12V
Output amplitude: 4.2V V-PP(5v input) to 11.4V V-PP(12V input).
Maximum output current: >=15mA (5V IN), >=35mA (12V IN)
Rs 250.00Rs 290.00
Quick Info :
All SD SPI pins output, MOSI, SCK, MISO, and CS.
Support 5V/3.3V input.
This module can handle 2GB SD cards.
Rs 350.00
Quick Info :
Interface : I2C
I2C Address : 0x3F
Supply voltage : 5V
Contrast Adjust : Through Potentiometer
Backlight : Blue
Rs 900.00Rs 1,100.00
Quick Info :
Type: 44-pin expansion breakout board
Compatible: ESP32-S3 development boards
Terminals: Screw terminal blocks (1→2 expansion)
Spacing: 25.4mm (44-pin)
Size: 80mm x 58mm
No Soldering Required
Rs 850.00Rs 950.00
Quick Info :
Type: Motor Mounting Bracket
Material: Aluminium Alloy
Compatibility: 37GB(GA) DC Motors
Dimensions: 47x40x43mm
Rs 250.00Rs 290.00
Quick info:
Charges both Li-ion (4.2V) and LiFePO4 (3.6V) batteries
Adjustable charging current: 0.5A to 2A (default 1A)
Embedded switching regulator for efficient charging
LED indicators: Red (charging), Green (complete)
Multiple protection circuits: overcurrent, over-discharge, overvoltage
Compact design with heat dissipation pad
Easy voltage switching via F solder pad connection
Rs 390.00
Quick info:
Wireless Bluetooth Connectivity – Connects to Android, Windows, and some iOS devices for hassle-free diagnostics.
Reads & Clears Error Codes (DTCs) – Quickly diagnose and fix engine issues.
Supports Multiple Protocols – Works with ISO 9141-2, KWP2000, CAN Bus, and more.
Works with Popular Apps – Compatible with Torque, Car Scanner, FORScan,
Cost-Effective Diagnostic Tool – Saves money on mechanic visits by allowing DIY troubleshooting.
Rs 890.00Rs 990.00
Quick Info :
Temperature range: -50 -110°C
Dimensions: 48.5 * 40mm
Temperature control mode: ON / OFF
Control accuracy: 0.1 °C
Output voltage: DC 12V
Rs 750.00
Quick Info :
Working Voltage : 3.2V to 5.5V DC
Working Current:
Transmitting: 43 mA
Receiving: 19 mA
Sleep Mode: 1.8 mA
Data Interface : UART/TTL (Serial)
Working Temperature : -20°C to +70°C
Rs 1,390.00
Quick Info :
2G Quad-band 850/900/1800/1900MHz
Receive and make calls using the speaker and microphone outputs
Receive and send SMS
Listen to FM radio broadcasts
Rs 1,490.00
Quick Info :
Connector Type: USB Type -B
PCB Size: 20 x 20 mm
Weight: 4g
Rs 100.00
Quick Info :
Simple 3 pin interface to control the resistance
Supply voltage: 3V-5V
Chip: X9C103S
PCB board size: 2.7 * 1.3CM
10K span potentiometer.
Rs 590.00
Quick Info :
Maximum output power: 3W*2(5V 4Ω)
Built with switch Potentiometer
Rs 320.00
Quick Info :
MT8870 Frequency decoder chip
Onboard 3.5mm input interface
5V Input
Designed to be compatible with standard 2.54mm sockets
Rs 490.00
Quick Info :
Frequency: 915MHz (902-928MHz)
Gain: 3dBi
Type: Omnidirectional
Connector: SMA Male
Cable: IPX to SMA (20cm)
Application: Indoor LoRa/LoRaWAN
Impedance: 50 Ohm
Rs 1,950.00Rs 2,150.00
Quick Info :
Operating Voltage (Control): 5 V DC
Channels: 1 Channel
Isolation: Optocoupler (Opto-Isolated)
Max Switching Voltage (AC): 250 V AC @ 10 A
Rs 250.00Rs 350.00
Quick Info :
1 Inch (25.4mm) Main Ball
66 lbs (30 kg) Load Capacity
Multi-Directional Movement
Mounting Plate: 70mm x 50mm
Overall Height: 30mm
Rs 130.00Rs 150.00
Quick Info :
Type: RFID Reader
Frequency: 13.56 MHz
Interface: USB
Effective Distance: 100mm
Application: Access Control, Logistics
Rs 2,150.00Rs 2,490.00
Quick Info :
Type: Power Line Communication Module
Data Rate: ~10kbps
Carrier Frequency: 120 kHz
Operating Voltage: 230V AC
Rs 3,500.00Rs 3,900.00
Quick Info :
Type: Micro SD Card Shield
Compatibility: Wemos D1 Mini
Interface: SPI
Storage: Micro SD Card up to 32GB
Application: Data Logging, File Storage
Rs 200.00Rs 250.00
Quick Info :
True TFT display with 262,144 vibrant colors
4-wire SPI interface – minimal pin usage
Works with 3.3V and 5V systems
Built-in microSD card slot for bitmap storage
Compatible with Arduino, Raspberry Pi, ESP32
Controllable LED backlight
Compact 34.5×58.0mm PCB size
Rs 1,490.00
Quick Info :
LED Type: 5050 SMD
Length: 5M
Voltage: 12V DC
Colors: Warm White, White
Rs 1,590.00
Quick info :
Model: AD8495
Sensing Accuracy Range: ± 1°C around room temperature, ± 2°C for −25°C to +400°C, beyond that range see the AN-1087 app note
Supply Voltage: 3-18VDC
Thermocouple Type: K-Type only
Rs 3,790.00
Quick Info :
Main Chip: PAM8610
Power Range: DC 6V-15V (self-protection)
Recommended Voltage: DC 12V(2A)
Output Power: 10Wx2(8Ω) 15Wx2(4Ω)
Rs 450.00
Quick Info :
ENC28J60 Ethernet chips, SOP28 package
SPI Interface
Single Supply: +3.3 V
Rs 990.00
Quick Info :
LED Count: 36 LEDs/feet
Type: 2835 SMD UV purple
Voltage: 12 V DC
Application: Indoor plant growth
Rs 550.00Rs 650.00
Quick Info :
Current Rating: 30 A
Input Voltage: 2 – 3S LiPo / 5 – 9 NiMH
Motor Compatibility: 540 / 550 brushed motors
BEC Output: 5 V / 2 A
Rs 1,350.00Rs 1,520.00
Quick Info :
Chip: PCM5102
Resolution: Up to 32-bit/384kHz
Interface: I2S
Power: 3.3 V – 5 V DC
Rs 850.00Rs 1,050.00
Quick Info :
Voltage Range: DC 5 V – 120 V
Display: 3-digit LED
Accuracy: ±1%
Connection: 2-wire
Cutout Size: 45 mm x 26 mm
Rs 550.00Rs 700.00
Quick Info :
Wheel Compatibility: 60 mm – 80 mm mecanum wheels
Motor Type: TT gear motor
Material: Engineering plastic
Shaft Size: 6 mm D-shaft
Rs 250.00Rs 360.00
