-
MFRC522 RFID Reader Module
Quick Info :
- MFRC522 chip based board
- Operating frequency: 13.56MHz
- Supply Voltage: 3.3V
- Current: 13-26mA
Rs 360.00Rs 430.00MFRC522 RFID Reader Module
Rs 360.00Rs 430.00 -
2 Channel 5V DC Relay Module
Quick Info :
- Channel : 2
- Coil sensitivity = 5VDC
- Maximum Contact capacity = 250VAC/10VDC
- Maximum Current capacity = 10A
Rs 350.00Rs 590.002 Channel 5V DC Relay Module
Rs 350.00Rs 590.00 -
SD Card Reader Module
Quick Info :
- All SD SPI pins output, MOSI, SCK, MISO, and CS.
- Support 5V/3.3V input.
- This module can handle 2GB SD cards.
Rs 350.00SD Card Reader Module
Rs 350.00 -
Micro SD card reader module
Quick Info:
- Control Interface: GND, VCC, MISO, MOSI, SCK, CS
- Size: 45 x 28mm
- Net weight: 6g
Rs 350.00Micro SD card reader module
Rs 350.00 -
Plastic Wheel + Gear Motor
Quick Info :
- Name: TT motor
- Type: 1:48
- Speed: 45±10%r/min 90±10%r/min
- Rated voltage: 3V/6V
Rs 350.00Plastic Wheel + Gear Motor
Rs 350.00 -
Rs 350.00RGB SMD LED 8 Channel Module 5050 WS2812
Rs 350.00 -
-
PAM8403 Mini 5V Digital Amplifier Board
Quick Info :
- Maximum output power: 3W*2(5V 4Ω)
- Built with switch Potentiometer
Rs 320.00PAM8403 Mini 5V Digital Amplifier Board
Rs 320.00 -
Coin Cell Vibration Motor Module
Quick Info :
- Rated Voltage: 5.0VDC
- Operating Voltage: 3.0-6.0VDC
- Rated Speed: Minimum 9000 rpm
Rs 300.00Coin Cell Vibration Motor Module
Rs 300.00 -
DB9 Female Screw Terminal to RS232 RS485 Conversion Board
Quick Info :
- Perfect for experimentation and prototype work
- Brings all 9 pins of a DB9 connector to screw terminal blocks
- Adapter used for communication debug
- 9 pcs signal line was all lead out, name and number clearly labeled;
Rs 290.00 -
Mini DC 3A Motor PWM Speed Controller
Quick Info :
- Operating Voltage: DC 4.5V-35V
- Control Power: 90W (maximum)
- Size: 30mm x 26mm x 14mm (Without Handle)
Rs 290.00Mini DC 3A Motor PWM Speed Controller
Rs 290.00 -
Keypad Flexible 16 Keys
Quick Info :
- Arduino and Raspberry Pi compatible
- 16-key membrane switch pad has 8 pin female header on end of flat cable
- White sticker on back can be peeled off for adhesive mounting
Rs 290.00Keypad Flexible 16 Keys
Rs 290.00 -
HX711 Load Cell Amplifier
Quick Info :
- Operation Voltage: 2.7V-5V
- Operation Current: < 1.5mA
- Sample rate: 10Hz
- Simultaneous 50 and 60Hz supply rejection
- Available Load Cells 5kg, 10kg or 20kg
Rs 290.00HX711 Load Cell Amplifier
Rs 290.00 -
-
TDA2030 Audio Amplifier Module
Quick Info :
- 18 W mono amplifier circuit design
- On-board 10K potentiometer for volume adjustment
- Operating Voltage Range: 6 V to 12 V
Rs 290.00TDA2030 Audio Amplifier Module
Rs 290.00 -
Keypad Flexible 4 Keys
Quick Info :
- Arduino and Raspberry Pi compatible
- 4-key membrane switch pad has 5 pin female header on end of flat cable
- White sticker on back can be peeled off for adhesive mounting
Rs 285.00Keypad Flexible 4 Keys
Rs 285.00 -
NE555 Adjustable Pulse Frequency Duty Cycle Module Square Wave Signal Generator
Quick Info :
Main chip: NE555
Input Voltage (VCC): 5V-15VDC
Input current:~100MA
Output amplitude: 4.2V V-PP to 11.4V V-PP. (Varies with VCC voltage)Rs 280.00 -
0-100V DC Voltmeter
Quick Info :
- Working current: 20mA
- Operating voltage: 4-35 VDC
- Measurement rate: 200mS /Times
- Display Range : upto 100V
Rs 280.000-100V DC Voltmeter
Rs 280.00 -
SMA Female to IPEX UFL With Cable
Quick Info :
- Length: 20cm
- Connectors: SMA Female to IPEX4/MHF4
- Compatible With: SIM800L, SIM900A, ESP32U
- Impedance: 50 Ohm
Rs 250.00Rs 300.00SMA Female to IPEX UFL With Cable
Rs 250.00Rs 300.00 -
1 channel 5V DC Relay Module with Optocoupler
Quick Info :
- Operating Voltage (Control): 5V DC
- Channels: 1 Channel
- Isolation: Optocoupler (Opto-Isolated)
- Max Switching Voltage (AC): 250V AC @ 10A
Rs 250.00Rs 350.001 channel 5V DC Relay Module with Optocoupler
Rs 250.00Rs 350.00 -
Aluminium Gear Motor Bracket 37GB
Quick Info :
- Type: Motor Mounting Bracket
- Material: Aluminium Alloy
- Compatibility: 37GB(GA) DC Motors
- Dimensions: 47x40x43mm
Rs 250.00Rs 290.00Aluminium Gear Motor Bracket 37GB
Rs 250.00Rs 290.00 -
TP5100 Lithium Cell Charging Module
Quick Info :
- Model: TP5100
- Input Supply voltage (V): 5 ~ 18
- Programmable charge current: 0.1 ~ 2 A.
Rs 250.00TP5100 Lithium Cell Charging Module
Rs 250.00 -
IRF520 MOSFET Driver Module
Quick Info :
- Voltage: 3.3V, 5V
- Output load voltage :0-24V
- Output load current: <5A (1A need to add more heat sink)
Rs 250.00IRF520 MOSFET Driver Module
Rs 250.00 -
NRF24L01 2.4GHz Transceiver Adapter Base
Quick Info :
- It can be used with NRF24L01 wireless module
- Add core nRF24L01+ Breakout Adapter with onboard 3.3V Regulator
- Onboard 3.3V voltage regulator accepts your Arduino +5V supply and provides 3.3V for the attached nRF24L01+ module
- Allows for easy connection to nRF24L01+ modules
- Small power on SMD LED indicator
Rs 250.00NRF24L01 2.4GHz Transceiver Adapter Base
Rs 250.00 -
FPV Pan/Tilt Camera Mount
Quick Info :
- Weight: 38g
- Size: 70x38x36mm
- Compatible Servos : Servo 9g or Servo MG90S
Rs 250.00FPV Pan/Tilt Camera Mount
Rs 250.00 -
-
Rs 250.00
Rs 490.00Mini RS232 to TTL Level Converter Module
Rs 250.00Rs 490.00 -
TTL To RS485 Adapter UART Converter Module 3.3V 5V
Quick Info :
- MAX485 chip-based for reliable RS485 communication
- Compatible with 3.3V and 5V power supplies
- Built-in 120-ohm termination resistor (jumper selectable)
- RX/TX LED indicators for signal monitoring
Rs 230.00 -
ULN2003 Stepper Motor Driver Board Module
Quick Info :
- High Voltage Outputs: 50V
- Inputs Compatible with Popular Logic Types (5V TTL – Arduino Compatible)
- Relay Driver Applications
Rs 230.00Rs 390.00ULN2003 Stepper Motor Driver Board Module
Rs 230.00Rs 390.00 -
NE555 Pulse Generator Module
Quick Info :
- The working voltage: 5 ~ 12V
- Output amplitude: 4.2V V-PP(5v input) to 11.4V V-PP(12V input).
- Maximum output current: >=15mA (5V IN), >=35mA (12V IN)
Rs 220.00Rs 290.00NE555 Pulse Generator Module
Rs 220.00Rs 290.00 -
MAX485 RS485 to TTL module
Quick Info :
- Working voltage：5V
- Connect to 2P terminal on board, for wiring of RS-485 to communicate
Rs 220.00MAX485 RS485 to TTL module
Rs 220.00 -
WeMos D1 Mini Micro SD Shield
Quick Info :
- Type: Micro SD Card Shield
- Compatibility: Wemos D1 Mini
- Interface: SPI
- Storage: Micro SD Card up to 32GB
- Application: Data Logging, File Storage
Rs 200.00Rs 250.00WeMos D1 Mini Micro SD Shield
Rs 200.00Rs 250.00 -
TT Gear Motor
Quick Info :
- Name: TT motor
- Type: 1:48
- Speed: 45±10%r/min 90±10%r/min
- Rated voltage: 3V/6V
Rs 200.00TT Gear Motor
Rs 200.00 -
AT24C256 I2C interface EEPROM Memory Module
Quick Info:
- Onboard chip AT24C256 chip
- Onboard the I2C communications required pull-up resistor
- All pins are leads and marked
- PCB board Dimensions : 36.5 (mm) x12 (mm)
Rs 200.00Rs 390.00AT24C256 I2C interface EEPROM Memory Module
Rs 200.00Rs 390.00 -
