-
USB to RS485 Converter Adapter
Quick Info :
- Fully compliant USB 2.0 standard, backward compatible with USB1.1
- Support System: Windows XP, Vista, Windows 7, Linux, MacOS, and WinCE5.0 drive
- Supports Plug, Play and hot-swap ( USB side) ;
Rs 450.00USB to RS485 Converter Adapter
Rs 450.00 -
MFRC522 RFID Reader Module
Quick Info :
- MFRC522 chip based board
- Operating frequency: 13.56MHz
- Supply Voltage: 3.3V
- Current: 13-26mA
Rs 430.00MFRC522 RFID Reader Module
Rs 430.00 -
Mini Motor Drive Shield Expansion Board L293D Module
Quick Info :
- Controls 2 DC motors or 1 stepper motor simultaneously
- Wide voltage range: 4.5V to 25V input supply
- 600mA continuous, 1.2A peak current per channel
- Built-in overtemperature and overcurrent protection
- PWM speed control and bidirectional rotation
- Direct compatibility with Arduino UNO/MEGA 2560
- Compact size: 40 x 35.5 x 12.5mm, weighs only 10g
Rs 400.00 -
74HC4067 16-Channel Analog Multiplexer Module
Quick Info :
- 16 bi-directional channels
- Can be used as multiplexer or demultiplexer
- Channels can handle analog or digital signals
Rs 400.00 -
TP5000 Battery Charging Module
Quick info:
- Charges both Li-ion (4.2V) and LiFePO4 (3.6V) batteries
- Adjustable charging current: 0.5A to 2A (default 1A)
- Embedded switching regulator for efficient charging
- LED indicators: Red (charging), Green (complete)
- Multiple protection circuits: overcurrent, over-discharge, overvoltage
- Compact design with heat dissipation pad
- Easy voltage switching via F solder pad connection
Rs 390.00TP5000 Battery Charging Module
Rs 390.00 -
15A 400W MOSFET Trigger Switch Drive Module
Quick Info :
- Operating Voltage: DC 5V – 36V;
- The trigger source: digital high-low (DC3.3V – 20V),
- Output capacity: DC 5V – 36V,
Rs 390.00 -
433Mhz Transmitter and Receiver
Quick Info :
- Transmitter Operating Voltage: +5V only
- Transmitter Operating current: 9mA to 40mA
- Operating frequency: 433 MHz
- Transmission Distance: 3 meters (without antenna) to 100 meters (maximum)
Rs 390.00433Mhz Transmitter and Receiver
Rs 390.00 -
SD Card Reader Module
Quick Info :
- All SD SPI pins output, MOSI, SCK, MISO, and CS.
- Support 5V/3.3V input.
- This module can handle 2GB SD cards.
Rs 350.00SD Card Reader Module
Rs 350.00 -
Micro SD card reader module
Quick Info:
- Control Interface: GND, VCC, MISO, MOSI, SCK, CS
- Size: 45 x 28mm
- Net weight: 6g
Rs 350.00Micro SD card reader module
Rs 350.00 -
Plastic Wheel + Gear Motor
Quick Info :
- Name: TT motor
- Type: 1:48
- Speed: 45±10%r/min 90±10%r/min
- Rated voltage: 3V/6V
Rs 350.00Plastic Wheel + Gear Motor
Rs 350.00 -
-
PAM8403 Mini 5V Digital Amplifier Board
Quick Info :
- Maximum output power: 3W*2(5V 4Ω)
- Built with switch Potentiometer
Rs 320.00PAM8403 Mini 5V Digital Amplifier Board
Rs 320.00 -
Coin Cell Vibration Motor Module
Quick Info :
- Rated Voltage: 5.0VDC
- Operating Voltage: 3.0-6.0VDC
- Rated Speed: Minimum 9000 rpm
Rs 300.00Coin Cell Vibration Motor Module
Rs 300.00 -
Real Time Clock Module DS1307
Quick Info :
- Operating Voltage : 4.5V to 5.5V
- Current Consumption : < 500nA (with backup battery)
- Communication Interface : I2C (SCL, SDA)
- Time Format : 12-hour or 24-hour
- Backup Battery Support : CR2032 3V lithium battery
Rs 290.00Real Time Clock Module DS1307
Rs 290.00 -
Mini DC 3A Motor PWM Speed Controller
Quick Info :
- Operating Voltage: DC 4.5V-35V
- Control Power: 90W (maximum)
- Size: 30mm x 26mm x 14mm (Without Handle)
Rs 290.00Mini DC 3A Motor PWM Speed Controller
Rs 290.00 -
Keypad Flexible 16 Keys
Quick Info :
- Arduino and Raspberry Pi compatible
- 16-key membrane switch pad has 8 pin female header on end of flat cable
- White sticker on back can be peeled off for adhesive mounting
Rs 290.00Keypad Flexible 16 Keys
Rs 290.00 -
HX711 Load Cell Amplifier
Quick Info :
- Operation Voltage: 2.7V-5V
- Operation Current: < 1.5mA
- Sample rate: 10Hz
- Simultaneous 50 and 60Hz supply rejection
- Available Load Cells 5kg, 10kg or 20kg
Rs 290.00HX711 Load Cell Amplifier
Rs 290.00 -
-
TDA2030 Audio Amplifier Module
Quick Info :
- 18 W mono amplifier circuit design
- On-board 10K potentiometer for volume adjustment
- Operating Voltage Range: 6 V to 12 V
Rs 290.00TDA2030 Audio Amplifier Module
Rs 290.00 -
LED Strip White 5050
Quick Info :
- LED Type : SMD 5050
- Color : White
- Length : 5m
- Voltage : 12V
- Beam Angle : 120°
- Waterproof Rating : IP20 (Indoor)
- Installation : Self-adhesive backing or clips for mounting
Rs 285.00LED Strip White 5050
Rs 285.00 -
Keypad Flexible 4 Keys
Quick Info :
- Arduino and Raspberry Pi compatible
- 4-key membrane switch pad has 5 pin female header on end of flat cable
- White sticker on back can be peeled off for adhesive mounting
Rs 285.00Keypad Flexible 4 Keys
Rs 285.00 -
NE555 Adjustable Pulse Frequency Duty Cycle Module Square Wave Signal Generator
Quick Info :
Main chip: NE555
Input Voltage (VCC): 5V-15VDC
Input current:~100MA
Output amplitude: 4.2V V-PP to 11.4V V-PP. (Varies with VCC voltage)Rs 280.00 -
DC Submersible Mini 3-6V Water Pump
Quick Info
- Flow rate – 120l/h
- Max height – 1.1 m
- Voltage – 3 to 6 v
Rs 280.00DC Submersible Mini 3-6V Water Pump
Rs 280.00 -
TP5100 Lithium Cell Charging Module
Quick Info :
- Model: TP5100
- Input Supply voltage (V): 5 ~ 18
- Programmable charge current: 0.1 ~ 2 A.
Rs 250.00TP5100 Lithium Cell Charging Module
Rs 250.00 -
IRF520 MOSFET Driver Module
Quick Info :
- Voltage: 3.3V, 5V
- Output load voltage :0-24V
- Output load current: <5A (1A need to add more heat sink)
Rs 250.00IRF520 MOSFET Driver Module
Rs 250.00 -
NRF24L01 2.4GHz Transceiver Adapter Base
Quick Info :
- It can be used with NRF24L01 wireless module
- Add core nRF24L01+ Breakout Adapter with onboard 3.3V Regulator
- Onboard 3.3V voltage regulator accepts your Arduino +5V supply and provides 3.3V for the attached nRF24L01+ module
- Allows for easy connection to nRF24L01+ modules
- Small power on SMD LED indicator
Rs 250.00NRF24L01 2.4GHz Transceiver Adapter Base
Rs 250.00 -
1 channel 5V DC Relay Module
Quick Info :
- Channel : 1
- Coil sensitivity = 5VDC
- Maximum Contact capacity = 250VAC/10VDC
- Maximum Current capacity = 10A
Rs 250.00Rs 390.001 channel 5V DC Relay Module
Rs 250.00Rs 390.00 -
-
TTL To RS485 Adapter UART Converter Module 3.3V 5V
Quick Info :
- MAX485 chip-based for reliable RS485 communication
- Compatible with 3.3V and 5V power supplies
- Built-in 120-ohm termination resistor (jumper selectable)
- RX/TX LED indicators for signal monitoring
Rs 230.00 -
ULN2003 Stepper Motor Driver Board Module
Quick Info :
- High Voltage Outputs: 50V
- Inputs Compatible with Popular Logic Types (5V TTL – Arduino Compatible)
- Relay Driver Applications
Rs 230.00Rs 390.00ULN2003 Stepper Motor Driver Board Module
Rs 230.00Rs 390.00 -
MAX485 RS485 to TTL module
Quick Info :
- Working voltage：5V
- Connect to 2P terminal on board, for wiring of RS-485 to communicate
Rs 220.00MAX485 RS485 to TTL module
Rs 220.00 -
TT Gear Motor
Quick Info :
- Name: TT motor
- Type: 1:48
- Speed: 45±10%r/min 90±10%r/min
- Rated voltage: 3V/6V
Rs 200.00TT Gear Motor
Rs 200.00 -
-
GSM PCB Trace Antenna
Quick Info :
- Low Freq. range – 820-960mHz
- High Freq. range – 1710-1990mHz
- Cable – RF1.13
- Connector – I-PEX
Rs 150.00GSM PCB Trace Antenna
Rs 150.00 -
PAM8403 3W Audio Amplifier
Quick Info:
- Supply Voltage: 5VDC
- 3W Output at 10% THD with a 4Ω Load and 5V Power Supply
Rs 130.00PAM8403 3W Audio Amplifier
Rs 130.00