-
Electronic SCR 230V AC Voltage Regulator 2000W
Specifications :
- Input Voltage: 220V
- Maximum Power: 2000W
- Adjustable Voltage: 50V-220V
Rs 950.00Rs 1,250.00Electronic SCR 230V AC Voltage Regulator 2000W
Rs 950.00Rs 1,250.00 -
NRF24L01 2.4GHz Transceiver With Antenna
Quick Info :
- Voltage: 3-3.6V (recommended 3.3V) V.
- Maximum output power: +20dBm.
- Power-down mode current: 4.2uA.
- Operating Range: 1Km
Rs 950.00NRF24L01 2.4GHz Transceiver With Antenna
Rs 950.00 -
ELM327 Bluetooth Interface OBD2 Car Scanner
Quick info:
- Wireless Bluetooth Connectivity – Connects to Android, Windows, and some iOS devices for hassle-free diagnostics.
- Reads & Clears Error Codes (DTCs) – Quickly diagnose and fix engine issues.
- Supports Multiple Protocols – Works with ISO 9141-2, KWP2000, CAN Bus, and more.
- Works with Popular Apps – Compatible with Torque, Car Scanner, FORScan,
- Cost-Effective Diagnostic Tool – Saves money on mechanic visits by allowing DIY troubleshooting.
Rs 890.00 -
W3001 220V Temperature Controller
Quick Info :
- Temperature measurement and programming range: -50°C …110°C
- Measurement accuracy: 0.1°C in the range from -9.9°C to 99.9°C; or 1.0°C outside this range
- Control accuracy: 0.1°C 0.1°C in the range -9.9°C to 99.9°C; or 1.0°C outside this range
- Hysteresis accuracy: 0.1°C
- Reading update time: 0.5 seconds
- Supply voltage, V: 110-220 AC
Rs 890.00W3001 220V Temperature Controller
Rs 890.00 -
GSM GPRS Adhesive Antenna
Quick Info :
- Low Freq. range – 820-960mHz
- High Freq. range – 1710-1990mHz
- Cable length – Max 3m
- Connector Type – SMA
Rs 890.00GSM GPRS Adhesive Antenna
Rs 890.00 -
RGB LED 2812 Strip Non waterproof Loose
Quick Info :
- LED Type : SMD2812
- Light Colors : RGB (Red, Green, Blue – Mixable for millions of colors)
- Length : 5 Meters
- Voltage : 12V / 24V DC
- Power Consumption : 7.2W – 14.4W per meter
- Luminous Flux : 500 – 1200 lm/m
Rs 850.00RGB LED 2812 Strip Non waterproof Loose
Rs 850.00 -
RGB Pixel LED Controller Driver WS2811 WS2812 UCS1903
Quick Info :
- Support WS2811 WS2812B LED LED lights. It can’t control SK6812 RGBW and regular RGB LED lights without a driver IC. 300+ color modes include rainbow, wave, breathing, strobing, gradual change, color cycle, comet, static, fading, and chasing. Color-changing speed and brightness are adjustable.
Rs 850.00 -
Thermoelectric Peltier Cooler TEC1-12706
Quick Info:
- Current : 0A ~ 6A
- Operating Voltage : 0V ~ 15.2V
- Power : 60W
- Temperature Range : -30C to 70C
Rs 850.00Thermoelectric Peltier Cooler TEC1-12706
Rs 850.00 -
-
AD828 Stereo Dynamic Microphone Preamplifier Module
Quick Info :
- Main Chip: AD828
- Working Voltage: DC 3.7-15V
Rs 800.00 -
MAX7219 8 X 8 LED Dot Matrix Module
Quick Info :
- A single module can drive 8 by 8 common cathodes
- Module Operating voltage: 5V.
- Module size: 5 cm long X 3.2 cm wide X 1.5 cm high
- Module with input and output interfaces, supports multiple modules cascade
- Led colour:Red
Rs 800.00MAX7219 8 X 8 LED Dot Matrix Module
Rs 800.00 -
MAX98357 I2S 3W Amplifier Module
Quick Info :
- Operating voltage: 2.7 – 5.5 V
- The I2S audio input supports 3.3V and 5V levels
- 3.2W output at 10% THD,
- Speaker Spec : 4 Ω impedance of the speaker and 5 V power supply
Rs 790.00MAX98357 I2S 3W Amplifier Module
Rs 790.00 -
-
4 channel 5V DC Relay Module
Quick Info :
- Channel : 4
- Coil sensitivity = 5VDC
- Maximum Contact capacity = 250VAC/10VDC
- Maximum Current capacity = 10A
Rs 790.004 channel 5V DC Relay Module
Rs 790.00 -
-
USB to TTL Converter CP2102 (5 Pin)
Quick Info :
- Standard USB type A male and TTL 5 pin connector.
- 5 pins for 3.3V, TXD, RXD, GND & 5V.
- Baud rates: 300 bps to 1.5 Mbps
Rs 790.00USB to TTL Converter CP2102 (5 Pin)
Rs 790.00 -
W1209 Digital Temperature Controller Module
Quick Info :
- Temperature range: -50 -110°C
- Dimensions: 48.5 * 40mm
- Temperature control mode: ON / OFF
- Control accuracy: 0.1 °C
- Output voltage: DC 12V
Rs 750.00 -
OLED 128X64 0.96 inch Display Module
Quick Info :
- OLED Driver IC: SSD1306
- Resolution: 128 x 64
- Visual Angle: >160°
- Input Voltage: 3.3V ~ 6V
- Compatible I/O Level: 3.3V, 5V
Rs 750.00Rs 990.00OLED 128X64 0.96 inch Display Module
Rs 750.00Rs 990.00 -
Digital Audio Power Amplifier Module HW-710
Quick info :
- Output Power: 2x50W (stereo mode) or 100W (mono mode)
- Frequency Response: 20Hz to 20kHz
- Signal-to-Noise Ratio (SNR): ≥100dB
- Chip: TPA3116D2
- Power Supply Voltage: 12-24V DC
Rs 690.00 -
GPS Adhesive Type Antenna SMA
Quick Info :
- Frequency – 1559MHz-1609Mhz
-
Active antenna noise figure <1.5dB
-
Polarization -RHCP or Linear
-
Cable length – Max. 3m
Rs 690.00GPS Adhesive Type Antenna SMA
Rs 690.00 -
Digital Voltmeter & Ammeter Dual Display
Quick Info :
- Size: 48mm x 29mm x 26mm.
- Display color: Red & Blue LED (dual display).
- Display: 0.28″ LED digital.
- Operating voltage: DC 4.5 ~ 30V.
- Measure voltage: DC 0 ~ 100V.
- Measure current: 10A (direct measurement, built-in shunt).
Rs 690.00Digital Voltmeter & Ammeter Dual Display
Rs 690.00 -
Air Humidifier Driver Board Mist Maker Cotton Stick
Quick Info :
- Product Type: Humidifier Driver Board with Cotton Stick
- Input Voltage: DC 5V
- Power Output: 5W – 12W
- Mist Output: High-efficiency ultrasonic mist generation
- Cotton Stick Length: 10 cm
- Material: PCB driver board And cotton filter stick
Rs 590.00 -
XY-J02 Timer Module With Relay
Quick info :
- Operating voltage: 6 – 30V DC
- 1 Channel delay triggered relay module
- Delay time: 0.1 second to 999 minutes
Rs 590.00XY-J02 Timer Module With Relay
Rs 590.00 -
TPA3110 XH-A232 30W + 30W Dual Channel Audio Power Amplifier
Quick Info :
- Operating voltage: 12V to 24V
- Output Power: 30W+30W
- Dual channel
- Chip name: TPA3110
Rs 590.00 -
2 Channel 5V DC Relay Module
Quick Info :
- Channel : 2
- Coil sensitivity = 5VDC
- Maximum Contact capacity = 250VAC/10VDC
- Maximum Current capacity = 10A
Rs 590.002 Channel 5V DC Relay Module
Rs 590.00 -
ESP8266 ESP-01 WIFI module
Quick Info :
- 802.11 b/g/n
- Operating Voltage: 3.3V
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
Rs 590.00ESP8266 ESP-01 WIFI module
Rs 590.00 -
MFRC522 RFID Reader Module
Quick Info :
- MFRC522 chip based board
- Operating frequency: 13.56MHz
- Supply Voltage: 3.3V
- Current: 13-26mA
Rs 590.00MFRC522 RFID Reader Module
Rs 590.00 -
FT232RL USB to TTL Converter
Quick Info :
- Data transfer rates from 300 baud to 3 Mbaud (RS422, RS485, RS232) at TTL levels.
- Integrated +3.3V level converter for USB I/O
- Integrated level converter on UART and CBUS for interfacing to between +1.8V and +5V logic.
Rs 590.00FT232RL USB to TTL Converter
Rs 590.00 -
Rs 580.00
Rs 690.00Stepper Motor 28BYJ-48 5V and ULN2003A Driver Module
Rs 580.00Rs 690.00 -
L293D Motor Driver Module
Quick Info :
- Operating Voltage – 4.5 V to 36V.
- Compatible with Arduino Uno and Mega
- Compatible Motor and Wheel : DC Gear Motor With Plastic Wheel
Rs 560.00Rs 750.00L293D Motor Driver Module
Rs 560.00Rs 750.00 -
PAM8610 15Wx2 Stereo Audio Amplifier Board
Quick Info :
- Main Chip: PAM8610
- Power Range: DC 6V-15V (self-protection)
- Recommended Voltage: DC 12V(2A)
- Output Power: 10Wx2(8Ω) 15Wx2(4Ω)
Rs 490.00 -
TCA9548A 1-to-8 I2C 8 Channel IIC Multiple Extensions
Quick Info :
- 1-to-8 Bidirectional Translating Switches.
- Supports Hot Insertion.
- Low Standby Current.
- 1-to-8 Bidirectional Translating Switches.
Rs 490.00 -
NRF24L01 2.4GHz Transceiver
QUICK OVERVIEW
- Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability,
- Built-in hardware CRC error detection, Multipoint communication address control.
- Low-power 1.9 ~ 3.6V, only 1uA on Power down mode
- Built-in 2.4Ghz antenna
- Built-in voltage regulator
Rs 490.00NRF24L01 2.4GHz Transceiver
Rs 490.00 -
LCD 16X2 Character Module
Quick Info :
- Operating Voltage is 4.7V to 5.3V
- Current consumption is 1mA without backlight
- Alphanumeric LCD display module, meaning can display alphabets and numbers
- Consists of two rows and each row can print 16 characters.
- Compatible with LCD to I2C Adapter Board
Rs 460.00 – Rs 490.00LCD 16X2 Character Module
Rs 460.00 – Rs 490.00 -
USB2.0 TO TTL SERIAL 6PIN CONVERTER CH340G
Quick Info :
- Built-in USB to TTL Transfer chip.
- Designed to be used for USB to TTL electronic projects.
- TTL interface output. easy to connect to your MCU.
Rs 490.00