-
4 channel 5V DC OMRON Solid State Relay Module
Quick Info :
- Channels : 4
- Input release voltage: 3.5 to 5V
- Rated load voltage: 100V to 240V AC
- Load current: 0.10 to 2A
Rs 1,600.004 channel 5V DC OMRON Solid State Relay Module
Rs 1,600.00 -
PAM8406 5W Audio Amplifier
Quick Info :
- 5W Output at 10% (Total Harmonic Distortion) THD with a 2Ω Load and 5V Power Supply at Class-D Mode
- 3W Output at 10% THD with a 4Ω Load and 5V Power Supply
Rs 550.00PAM8406 5W Audio Amplifier
Rs 550.00 -
1.28-Inch Round LCD TFT Display GC9A01
Specification:
- Size: 1.28inch
- Resolution: 240 × 240
- Driving chip: GC9A01
- Interface method: SPI
- Color: Full-color RGB
Rs 2,190.001.28-Inch Round LCD TFT Display GC9A01
Rs 2,190.00 -
4-DOF Robot Arm Kit
Quick Info :
- Degree: 4 Degree of Freedom
- Material: Acrylic
- Compatible Servo: 4 Micro Servos MG90 (Not Included
Rs 1,390.004-DOF Robot Arm Kit
Rs 1,390.00 -
Solenoid Mini Door Lock DC 12V 1A
Quick Info :
- Working Voltage : 12V 1A
- Body Dimensions : 42mm X 15mm X 15mm (L X W X H)
- Shaft Dimensions : 3mm
- Cable Length : 200mm (20cm)
- Connector Type : 2 Pin JST XH (2.00mm Pitch)
Rs 1,500.00Solenoid Mini Door Lock DC 12V 1A
Rs 1,500.00 -
GPS Adhesive Type Antenna SMA
Quick Info :
- Frequency – 1559MHz-1609Mhz
-
Active antenna noise figure <1.5dB
-
Polarization -RHCP or Linear
-
Cable length – Max. 3m
Rs 690.00GPS Adhesive Type Antenna SMA
Rs 690.00 -
GPRS A6 Mini Serial GPRS GSM Module
Quick Info :
- Working frequency: quad-band network, 850 / 900 / 1800 / 1900MHZ
- Working voltage: 4.5-5.2VDC
- Working Current: maximum of 2A
Rs 1,400.00GPRS A6 Mini Serial GPRS GSM Module
Rs 1,400.00 -
Mini USB Bluetooth Adapter V2.0
Quick Info:
- Interface: USB 2.0
- Support system : Windows 98/98SE/ME/2000/XP/Vista
- Receiving and Sending rang: Up to 20 m
Rs 400.00Rs 500.00Mini USB Bluetooth Adapter V2.0
Rs 400.00Rs 500.00 -
MAX7219 8 X 8 LED Dot Matrix Module V2
Quick Info :
- Single 8×8 LED Matrix Display with 1.3″ high bright red display
- Built-in MAX7219 LED Driver
- SPI 3-wire serial interface for easy hookup to MCU
Please note that the Jumper Cables need to be purchased separately
Rs 900.00MAX7219 8 X 8 LED Dot Matrix Module V2
Rs 900.00 -
LCD 20×4 Character Module with I2C Adapter
Quick Info :
- Interface : I2C
- I2C Address : 0x3F
- Supply voltage : 5V
- Contrast Adjust : Through Potentiometer
- Backlight : Blue
Rs 1,490.00LCD 20×4 Character Module with I2C Adapter
Rs 1,490.00 -
LCD 16X2 Keypad Shield
Quick Info :
- Operating Voltage: 5V
- 5 Push buttons.
- Left, Right, Up, Down and Select buttons
- Screen contrast adjustment
- Arduino Reset button
Rs 595.00LCD 16X2 Keypad Shield
Rs 595.00 -
125 kHz NFC USB RFID Card Reader
Quick info:
- Plug-and-Play: Easy setup with USB 2.0 interface
- Compatibility: ISO 14443 Type A/B, ISO 15693, and NFC cards
- Data Transfer speed: 106 kbps, 212 kbps, and 424 kbps
- Power Supply: 5V DC
Rs 2,290.00125 kHz NFC USB RFID Card Reader
Rs 2,290.00 -
Active GPS Patch Antenna (25*25)
Quick Info :
- Frequency – 1559Mhz-1609Mhz
- Active antenna noise figure < 1.5dB
- Cable – RF1.13
- Connector – I-PEX
Rs 650.00Active GPS Patch Antenna (25*25)
Rs 650.00 -
-
Rs 2,800.00 – Rs 4,800.00
-
4DOF Wooden Robot Arm Kit
Quick Info :
- 4 degrees of freedom for flexible arm movement
- Compatible with Arduino UNO, MEGA, and Raspberry Pi
- Uses 4x SG90 servo motors (may require separate purchase)
- Lightweight acrylic/wooden construction for easy assembly
- Includes functional claw gripper for object manipulation
- Multiple control options: joystick, PC software, custom code
- Perfect educational tool for STEM learning and robotics
Rs 2,890.004DOF Wooden Robot Arm Kit
Rs 2,890.00 -
Time Clock Module DS1302
Quick Info :
- Operating Voltage : 2.0V to 5.5V
- Battery Support : CR2032
- Module Dimensions : Typically ~27mm x 14mm
- Current Consumption : < 300nA (with backup battery)
- Communication Interface : 3-wire (CE, I/O, SCLK)
- Data Retention : Over 10 years with backup battery
Rs 350.00Time Clock Module DS1302
Rs 350.00 -
TPA3116D2 2x50W 100W 2.1 Digital Class D Subwoofer Amplifier Board
Quick info :
- Input Type: Analog
- Operating voltage: DC12-24V
- Output power: 50w*2+100w subwoofer*1
- Output load : 4-8Ω
Rs 1,790.00 -
1.8 inch TFT Module 128X160 ST7735S
Quick info :
- Display Size: 1.8″
- Driver IC: ST7735
- Input Voltage (V): 3.3 to 5
- Pixel Resolution: 128 x 160
- Interface Type: SPI
Rs 1,490.001.8 inch TFT Module 128X160 ST7735S
Rs 1,490.00 -
Digital Audio Power Amplifier Module HW-710
Quick info :
- Output Power: 2x50W (stereo mode) or 100W (mono mode)
- Frequency Response: 20Hz to 20kHz
- Signal-to-Noise Ratio (SNR): ≥100dB
- Chip: TPA3116D2
- Power Supply Voltage: 12-24V DC
Rs 690.00 -
RGB Pixel LED Controller Driver WS2811 WS2812 UCS1903
Quick Info :
- Support WS2811 WS2812B LED LED lights. It can’t control SK6812 RGBW and regular RGB LED lights without a driver IC. 300+ color modes include rainbow, wave, breathing, strobing, gradual change, color cycle, comet, static, fading, and chasing. Color-changing speed and brightness are adjustable.
Rs 850.00 -
NE5532 Tone Control Preamplifier Module
Quick Info :
Model: NE5532
Supply Voltage:Dual Power AC 12V – 18V
Number of Channel: Dual-channel Audio
Adjustment Types: 4 channels(treble+alto+bass+volume)Rs 1,590.00NE5532 Tone Control Preamplifier Module
Rs 1,590.00 -
TPA3116D2 2X120W Dual-Channel Stereo Power Amplifier
Quick Info :
Chip type: TPA3116D2
Working voltage: DC12-26V
Output power: 2*120W MAX,DC12V, 2*50W, DC24V, 2*120WRs 2,850.00 -
SX1278 RA-02 Lora Module
Quick Info :
- LoRa ™ Spread Spectrum modulation technology
- Constant RF power output at + 20dBm-100mW voltage change
- High sensitivity: down to -148dBm
- Half-duplex SPI communication
- Programmable bit rates up to 300kbps
- Supports FSK, GFSK, MSK, GMSK, LoRa ™ and OOK modulation modes
- 127dB RSSI dynamic range
- Automatic RF signal detection, CAD mode and very high speed AFC
- Packet engine with CRC up to 256 bytes
- Small footprint dual-row stamp-hole patch package
- Shielded housing
Rs 1,790.00SX1278 RA-02 Lora Module
Rs 1,790.00 -
-
-
Type C to HDMI Converter
Quick Info:
- Lightweight and portable design
- Quality USB 3.1 Type-C to HDMI 1080p adapter
- A perfect companion for MacBook and other type-c output devices to stream clear audio and video.
- Aluminum surface, ensures better heat dispersion, generating less heat
Rs 2,590.00Type C to HDMI Converter
Rs 2,590.00 -
VGA Video Splitter 2 Port
Quick Info:
- ·Supports resolution up to 1920*1440 @ 60 Hz.
- Supports up to 250MHz bandwidth.
- Long distance transmission up to 30m.
- Supports VGA, SVGA, UXGA, WUXGA, and multisync.
Rs 3,390.00VGA Video Splitter 2 Port
Rs 3,390.00 -
HDMI 4-Way Splitter
Quick Info :
- Duplicates one HDMI source to 4 displays
- Supports resolutions up to 1080p – high definition
- Easy installation; plug and play
- 1 HDMI female input to 4 HDMI female output
Rs 2,990.00HDMI 4-Way Splitter
Rs 2,990.00 -
Arduino Compatible XD-204 Data Logger Shield
Quick Info :
- Real Time Clock Module : DS1307
- SD Card reader : standard SD card
- RTC battery included
Rs 690.00 -
Bluetooth XBee Shield V3 Module Wireless Control
Quick Info :
- Stackable design, easy to plug into the ARDUINO development board.
- Coupled with the Arduino Bluetooth Bee Bluetooth module, and other Bluetooth devices can communicate Wirelessly.
- Coupled with the XBee module, you can achieve two or more sets of communication between Arduino or Arduino and PC Communications.
Rs 750.00 -
GSM GPRS Adhesive Antenna
Quick Info :
- Low Freq. range – 820-960mHz
- High Freq. range – 1710-1990mHz
- Cable length – Max 3m
- Connector Type – SMA
Rs 890.00GSM GPRS Adhesive Antenna
Rs 890.00
