Quick Info:
Main Chip : AT6558R GNSS SoC
Supported Systems : BDS, GPS, GLONASS, GALILEO, QZSS, SBAS
Positioning Accuracy : < 2 m CEP
Update Rate : Up to 10 Hz
Communication : UART – NMEA Protocol
Baud Rate : Up to 256000 bps
Power Supply : 5V
PPS Output : Yes
Rs 2,400.00Rs 2,500.00
Quick Info:
Programmer IC : CH341B
Supported Voltage : 1.8V / 3.3V / 5V
Supported Chips : 24Cxx / 25Cxx EEPROM
Clip : SOIC8 / SOP8 Test Clip
Adapter : SOP8 to DIP8 Converter
Interface : USB
Rs 2,850.00
Quick Info:
Storage Interface : MicroSD Card (FAT16 / FAT32)
Communication : SPI Interface
Supply Voltage : 3.3V – 5V DC
RTC IC : DS1307
RTC Backup : CR1220 Coin Cell Battery (Battery not included )
Supported Card Size : Up to 32GB MicroSD
Compatible Platforms : Arduino, ESP32, Raspberry Pi
Board Dimensions : 38 x 26 mm (approx.)
Rs 950.00Rs 975.00
Quick Info:
Image Sensor : OV3660
Resolution : 3MP
Field of View : 66 Degrees
IR Wavelengths : 650nm / 850nm
Night Vision : Yes
Connector : 24-Pin FPC, 0.5mm Pitch, 75mm Cable
Compatibility : ESP32-CAM
Rs 2,300.00Rs 2,500.00
Quick Info:
Screen Size : 3.5 inch
Driver IC : Raydium RM68140
Resolution : 480 × 320 pixels
Display Colour : RGB 65K / 262K
Touch Panel : 4-wire Resistive
Interface : 8-bit Parallel Bus
Operating Voltage : 3.3V – 5V)
SD Card Slot : Yes (Micro SD via SPI)
Compatible Boards : Arduino UNO R3/R4, Mega2560
Rs 3,750.00Rs 3,950.00
Quick Info:
Part Number : FJS23101BH
Display Type : 7-Segment Single Digit
Digit Height : 2.3 inch (58.4 mm)
Available Colors : Red, Green
Configuration : Common Anode (CA)
Forward Current : 20mA per segment
Operating Temperature : -40°C to +85°C
Rs 380.00Rs 400.00
Quick Info :
Type: Hard plastic push button keypad
Keys: 16 (0-9, *, #, A-D)
Interface: 8 pins (4 rows + 4 columns)
Pin Pitch: 2.54mm through-hole PCB
Mounting: 4 corner mounting holes
Housing: Black ABS plastic
Compatible: Arduino, ESP32, Raspberry Pi
Rs 800.00Rs 900.00
Quick Info :
Chip: NXP PN532
Frequency: 13.56MHz
Range: 5-7cm read/write
Interface: I2C/SPI/UART (selectable)
Cards: Mifare, NTAG, NFC, FeliCa
Voltage: 3.3V – 5V
Compatible: Arduino, Raspberry Pi, ESP32
Function: Read & Write NFC/RFID tags
Rs 1,150.00Rs 1,350.00
Quick Info :
Type: DB9 Male Connector Breakout Board
Terminals: 9 screw terminals (labeled)
Standards: RS232, RS485, RS422 compatible
Wire: 16-26 AWG
Use: Serial communication, PLC, industrial automation, testing
Rs 290.00Rs 350.00
Quick Info :
Voltage : 12 V DC
Current : ~1.0 A
Force : 5 N
Stroke : 10 mm
Type : Push-Pull
Rs 1,050.00Rs 1,250.00
Quick Info :
Frequency: 433MHz
Channels: 4 independent relays
Relay Rating: 20A per channel
Remotes: 2 included (4 buttons each)
Power: 12V DC
Range: 50-100 meters
Control: Wireless RF remote
Rs 2,850.00Rs 2,950.00
Quick Info :
Controls 2 DC motors or 1 stepper motor simultaneously
Wide voltage range: 4.5V to 25V input supply
600mA continuous, 1.2A peak current per channel
Built-in overtemperature and overcurrent protection
PWM speed control and bidirectional rotation
Direct compatibility with Arduino UNO/MEGA 2560
Compact size: 40 x 35.5 x 12.5mm, weighs only 10g
Rs 400.00
Quick info:
Diameter:20mm
Operating Voltage:3.7-12V
Frequency:113+/-3KHz
Rs 1,690.00
Quick info :
Model: AD8495
Sensing Accuracy Range: ± 1°C around room temperature, ± 2°C for −25°C to +400°C, beyond that range see the AN-1087 app note
Supply Voltage: 3-18VDC
Thermocouple Type: K-Type only
Rs 3,790.00
Quick Info :
Temperature measurement and programming range: -50°C …110°C
Measurement accuracy: 0.1°C in the range from -9.9°C to 99.9°C; or 1.0°C outside this range
Control accuracy: 0.1°C 0.1°C in the range -9.9°C to 99.9°C; or 1.0°C outside this range
Hysteresis accuracy: 0.1°C
Reading update time: 0.5 seconds
Supply voltage, V: 110-220 AC
Rs 890.00
Quick Info :
Audio type: TPA3116D2
Input voltage: DC 5V~DC 24V
Output power: 2 x 50 W
Output type: Double Track, Stereo
Rs 1,590.00
Quick Info :
ENC28J60 Ethernet chips, SOP28 package
SPI Interface
Single Supply: +3.3 V
Rs 990.00
Quick Info:
LED Type : WS2812B 5050 SMD RGB
Number of LEDs : 1
Interface : Single-Wire Data (DIN / DOUT)
Operating Voltage : 5V DC
Current Consumption : 60mA (Max)
Rs 180.00Rs 200.00
Quick Info:
LED Type : WS2812B 5050 SMD RGB
Number of LEDs : 4 (2×2 Layout)
Interface : Single-Wire Data (DIN / DOUT)
Operating Voltage : 5V DC
Current Consumption : 60mA per LED (Max)
Rs 180.00Rs 200.00
Quick Info:
Chip : TL072 (Dual JFET Op-Amp)
Input Impedance : 1MΩ
Gain : 10x (Approx. 20dB)
Supply Voltage : 9V to 15V DC (12V Recommended)
Board Size : 45mm x 30mm
Rs 1,850.00Rs 2,100.00
Quick Info:
Model : AJL-6860-RTR
Continuous Current : 60A
Peak Current : 480A
BEC Output : 6V / 3A
Battery : 2S–3S LiPo / 5–9 cell NiMH
Supported Motors : 540 / 550 / 750 brushed
Operating Modes : 3 (selectable)
Waterproof : Yes
Thermal Protection : 50% power @ 100°C
Dimensions : 37.5 × 31.5 × 20mm
Rs 4,350.00
Quick Info:
Control Type : DC to DC
Input Voltage : 3-32VDC
Load Voltage : 5-60VDC
Load Current : 25A
Mounting : Bolt Fixing
Rs 2,750.00Rs 2,950.00
Quick Info:
Control Type : DC to AC
Input Voltage : 3-32VDC
Load Voltage : 24-380VAC
Load Current : 25A
Trigger Method : Zero-Cross
Rs 2,350.00Rs 2,850.00
Quick Info:
Control Type : Variable Resistor (Potentiometer)
Control Resistance : 470K to 560K Ohm
Load Current : 25A
Load Voltage : 24-380VAC
Control Method : Phase Control
Rs 2,350.00Rs 2,850.00
Quick Info:
IC : TXS0108E
Channels : 8 (all bi-directional, full-duplex)
VCCA (A side) : 1.2V – 3.6V (low voltage)
VCCB (B side) : 1.65V – 5.5V (high voltage)
Max Speed (Push-Pull) : 110Mbps
Max Speed (Open-Drain) : 1.2Mbps
Direction Sensing : Automatic (no DIR pin)
Protocols : UART / SPI / I²C / GPIO / SD card
Pin Pitch : 2.54mm breadboard compatible
Compatible : Arduino / ESP32 / Raspberry Pi / STM32
Rs 180.00Rs 220.00
Quick Info:
Display : 1.3″ OLED, SH1106, 128×64, white monochrome
Interface : I²C (0x3C / 0x3D selectable)
Pull-up Resistors : 4.7kΩ onboard
Encoder : EC11 — 20 pulses / 20 detents
Encoder Input : Rotate (TRA/TRB) + Push (PSH)
Navigation Buttons : CON (confirm) + BAK (back)
Operating Voltage : 3.3V DC
Compatible : Arduino / ESP32 / Raspberry Pi / STM32
Libraries : U8g2 / Adafruit SSD1306
Rs 1,450.00Rs 1,850.00
Quick Info:
Chipset : TPA3118
Output Power : 60W (Mono)
Operating Voltage : DC 8V – 24V
Speaker Impedance : 4 – 8 Ohm
Rs 520.00Rs 650.00
Quick Info:
Chipset : TDA8932
Operating Voltage : DC 10V – 30V
Output Power : 35W
Speaker Impedance : 4 – 8 Ohm
Rs 600.00Rs 750.00
Quick Info:
Chip : ADUM1201
Channels : 2 (Bidirectional)
Data Rate : DC to 25Mbps
Isolation Voltage : 2500Vrms
Rs 490.00Rs 550.00
Quick Info:
Display Format : 16 Characters x 2 Lines
Backlight Color : Green
Supply Voltage : 5V DC
Rs 400.00Rs 450.00
Quick Info:
Display Format : 20 Characters x 4 Lines
Controller : HD44780 (or Compatible)
Backlight Color : Green
Supply Voltage : 5V DC
Rs 950.00Rs 1,150.00
Quick Info:
Chip : MCP23017 / MCP23S17
IO Pins : 16 (Bidirectional)
Interface : I2C / SPI
SPI Speed : Up to 10MHz
Operating Voltage : 1.8V to 5.5V
Rs 1,550.00Rs 1,800.00
Quick Info:
Material : Brass
Diameter : 4mm
Hexagonal Side : 7mm
Fastening Screw : M4
Rs 290.00Rs 350.00
Quick Info:
Interface : USB
Programming Socket : 40-pin DIP (ZIF)
Supported Chips : PIC10 / PIC12 / PIC16 / PIC18
Power Source : USB (no external supply)
Rs 2,550.00Rs 2,900.00
Quick Info:
Interface : USB (Full Speed)
Programming Protocol : ICSP
Supported Devices : PIC10/12/16/18/24, dsPIC
Included Accessory : ICSP Adapter Board
Rs 5,650.00Rs 6,250.00
