Quick Info :
Number of Channels : 1 Channel
Transistor Polarity: N-Channel
Drain-Source Breakdown Voltage (Vds) :500V
Continuous Drain Current (Id) :8A
Rs 210.00
Quick Info :
Transistor Type : NPN
Current – Collector (Ic) (Max) : 100 mA
Voltage – Collector Emitter Breakdown (Max) : 30 V
Vce Saturation (Max) @ Ib, Ic : 600mV @ 5mA, 100mA
Rs 10.00
Quick Info :
Operating Voltage: 5V
Backlight and Contrast is adjusted by potentiometer
Compatible for 16×2 , 16×4 and 20×4 LCD
Rs 250.00Rs 390.00
Quick Info :
Supply Voltage : 3-3.6 and 4.5-5.5
Temperature Range [°C] : -40 to +125
Output : Analog out / PWM / I²C
Interface : I²C
Resolution [bit]: 12
Rs 790.00
Quick Info :
Material: Brass
Color: Brass Tone
Product Type: Female Knurled Nut Inserts
Size Specification : Thread Size, Length (mm), Outer Diameter (mm)
Available Sizes : M2X3X3.2, M2X4X3.2, M2X5X3.2, M2X6X3.2, M2X8X3.2, M2.5X3X3.5, M2.5X4X3.5, M2.5X5X3.5, M2.5X6X3.5, M2.5X8X3.5
Rs 15.00
Quick Info :
Input voltage 3.2V ~ 40V
Output voltage 1.25V ~ 35V
Output current 3A (max)
Alternative : XL4015 Buck
Rs 290.00
Quick Info :
Working voltage：5V
Connect to 2P terminal on board, for wiring of RS-485 to communicate
Rs 220.00
Quick Info:
ATmega328P chip
14 digital I/O pins
6 analog input pins,
a USB connection,
A Power barrel jack,
ICSP header and a reset button.
crystal oscillator, serial communication, voltage regulator
Rs 2,590.00Rs 2,850.00
Quick Info :
Fully compliant USB 2.0 standard, backward compatible with USB1.1
Support System: Windows XP, Vista, Windows 7, Linux, MacOS, and WinCE5.0 drive
Supports Plug, Play and hot-swap ( USB side) ;
Rs 450.00
Quick Info :
Type : USB A 2.0 Male and Male
Cable Length : 15cm
Rs 220.00
Quick Info :
16 Channels of individually controllable PWM using PCA9685 Chip
PWM / Ground / 5V pins for each servo
I2C Interface
Rs 1,750.00Rs 1,950.00
Quick Info :
Operating Voltage is 4.7V to 5.3V
Current consumption is 1mA without backlight
Alphanumeric LCD display module, meaning can display alphabets and numbers
Consists of two rows and each row can print 16 characters.
Compatible with LCD to I2C Adapter Board
Rs 460.00Rs 490.00
Quick Info :
Operating Voltage : 3.5V to 5.5V
Temperature Range : -40°C to 80°C
Humidity Range : 0% to 100%
Rs 990.00
Quick Info :
Frequency : 500kHzSupply Voltage Min : 4.5VSupply Voltage Max : 16V
Rs 40.00
Specifications :
Input Voltage: 220V
Maximum Power: 2000W
Adjustable Voltage: 50V-220V
Rs 950.00Rs 1,250.00
QUICK OVERVIEW
Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability,
Built-in hardware CRC error detection, Multipoint communication address control.
Low-power 1.9 ~ 3.6V, only 1uA on Power down mode
Built-in 2.4Ghz antenna
Built-in voltage regulator
Rs 490.00
Quick Info :
Channel : 1
Coil sensitivity = 5VDC
Maximum Contact capacity = 250VAC/10VDC
Maximum Current capacity = 10A
Rs 250.00Rs 390.00
Quick Info :
It can be used with NRF24L01 wireless module
Add core nRF24L01+ Breakout Adapter with onboard 3.3V Regulator
Onboard 3.3V voltage regulator accepts your Arduino +5V supply and provides 3.3V for the attached nRF24L01+ module
Allows for easy connection to nRF24L01+ modules
Small power on SMD LED indicator
Rs 250.00
