Skip to content
Quick Info:
Control Type : Bidirectional SCR (Thyristor)
Input Voltage : AC 220-230V, 50/60Hz
Output Voltage : AC 50V to 220V, adjustable
Maximum Power : 2000W (resistive load)
Maximum Current : Up to 25A
Rs 950.00Rs 1,250.00
Quick Info :
High Voltage Outputs: 50V
Inputs Compatible with Popular Logic Types (5V TTL – Arduino Compatible)
Relay Driver Applications
Rs 230.00Rs 390.00
Quick Info :
Input supply voltage: 6V-28VDC
The maximum output power: 80W
The maximum continuous output current : 3A
Rs 450.00
Quick Info :
Max. Operating Voltage: 35V
Min. Operating Voltage: 8V
Max. Current Per Phase: 2A
Alternatives for A4988 : DRV8825 , TMC2209
Rs 330.00
Quick Info :
Complies with wireless 802.11n standards
Frequency band: 2.4~2.4835GHz
Data rate up to 150Mbps
Rs 950.00Rs 1,250.00
Quick Info :
Power Supply Voltage : 4.6V to 5.2V
Network Support : Quad-Band GSM/GPRS
Communication Interface : TTL UART
Peak Current Draw : Up to 1A or more
Rs 2,100.00Rs 2,200.00
Quick Info :
Voltage: 3-3.6V (recommended 3.3V) V.
Maximum output power: +20dBm.
Power-down mode current: 4.2uA.
Operating Range: 1Km
Rs 600.00Rs 850.00
Quick Info :
It can be used with NRF24L01 wireless module
Add core nRF24L01+ Breakout Adapter with onboard 3.3V Regulator
Onboard 3.3V voltage regulator accepts your Arduino +5V supply and provides 3.3V for the attached nRF24L01+ module
Allows for easy connection to nRF24L01+ modules
Small power on SMD LED indicator
Rs 200.00Rs 250.00
Quick Info:
Frequency Band : 2.4GHz to 2.525GHz
Data Rate : 250Kbps, 1Mbps, 2Mbps
Operating Voltage : 1.9V to 3.6V
Communication Range : Up to 100m (Open Air)
Rs 340.00Rs 490.00
Quick Info :
802.11 b/g/n
Operating Voltage: 3.3V
Wi-Fi Direct (P2P), soft-AP
Integrated TCP/IP protocol stack
Rs 490.00Rs 590.00
Quick Info :
ENC28J60 Ethernet chips, SOP28 package
SPI Interface
Single Supply: +3.3 V
Rs 990.00
Quick Info :
Transmitter Operating Voltage: +5V only
Transmitter Operating current: 9mA to 40mA
Operating frequency: 433 MHz
Transmission Distance: 2-3 meters (without antenna) to 5 meters (maximum)
Rs 390.00
Quick Info :
MFRC522 chip based board
Operating frequency: 13.56MHz
Supply Voltage: 3.3V
Current: 13-26mA
Rs 360.00Rs 430.00
Quick Info :
The working voltage: 5 ~ 12V
Output amplitude: 4.2V V-PP(5v input) to 11.4V V-PP(12V input).
Maximum output current: >=15mA (5V IN), >=35mA (12V IN)
Rs 250.00Rs 290.00
Quick Info :
Operating voltage : 2.3V – 5.5V
Battery not included
Battery : CR2032
Rs 1,050.00Rs 1,200.00
Quick Info:
Onboard chip AT24C256 chip
Onboard the I2C communications required pull-up resistor
All pins are leads and marked
PCB board Dimensions : 36.5 (mm) x12 (mm)
Rs 200.00Rs 390.00
Quick Info:
Interface : SPI (MISO, MOSI, SCK, CS)
Operating Voltage : 4.5V to 5.5V DC
Logic Level : 3.3V and 5V
Supported Cards : Micro SD (up to 2GB), Micro SDHC (up to 32GB)
Header : 6-pin
Rs 350.00
Quick Info :
Compatible Sensor : HC-SR04 Ultrasonic Module
Material : Acrylic
Mounting Hole Diameter : 3.8mm
Mounting Hardware : Not included (M3 screws recommended)
Rs 120.00Rs 130.00
Quick Info :
Name: TT motor
Type: 1:48
Speed: 45±10%r/min 90±10%r/min
Rated voltage: 3V/6V
Rs 350.00
Quick Info :
Channel : 4
Coil sensitivity = 5VDC
Maximum Contact capacity = 250VAC/10VDC
Maximum Current capacity = 10A
Rs 590.00Rs 790.00
Quick Info :
Number of Keys : 4 (1 x 4)
Keypad Type : Flexible membrane switch
Connector : 5-pin female, 2.54mm pitch
Maximum Rating : 35V DC, 100mA
Mounting : Self-adhesive backing
Rs 250.00
Quick Info :
Arduino and Raspberry Pi compatible
16-key membrane switch pad has 8 pin female header on end of flat cable
White sticker on back can be peeled off for adhesive mounting
Rs 200.00Rs 290.00
Quick Info :
12-key membrane switch pad has 7 pin female header on end of flat cable
White sticker on back can be peeled off for adhesive mounting
Rs 250.00
Quick Info:
Input Voltage : 3.3V to 5V DC
Output Signal : 2 analog (X, Y) + 1 digital (switch)
Pin Interface : VCC, GND, VRx, VRy, SW
Dimensions : 34mm x 26mm x 32mm
Rs 200.00Rs 250.00
Quick Info :
uses the 5050 full-color LED
Operating voltage: 5V
by adjusting the three primary colors can be mixed PWM get different colors
Rs 100.00
Quick Info:
Display Format : 20 Characters x 4 Lines
Controller : HD44780 (or Compatible)
Backlight Color : Blue
Supply Voltage : 5V DC
Rs 1,020.00Rs 1,250.00
Quick Info :
Display Size: 1.3 inches
Matrix: 8 × 8 (64 LEDs)
Driver IC: MAX7219
Operating Voltage: 5 V
A single module can drive 8 x 8 common cathodes
Rs 550.00Rs 600.00
Quick Info :
IC Chip : PCF8574 / PCF8574T
Compatible Displays : 1602 (16×2) & 2004 (20×4) LCD Modules
I2C Address : 0x20 to 0x27 (jumper selectable)
Operating Voltage : 2.5V to 6V
Rs 200.00Rs 390.00
Quick Info:
Display Format : 16 Characters x 2 Lines
Backlight Color : Blue
Supply Voltage : 5V DC
Rs 400.00Rs 450.00
Quick Info :
Module Size: 2.8cm * 1.3cm
Applicable connector: 5.5 * 2.1mm
Power output interface: 2 channel VCC, 2 channel GND
Net Weight: 3.2g
Rs 100.00
