Skip to content
Quick Info :
USB Type : Micro USB
Header : 2.54mm
Material : Plastic
Size(L*W) : Approx. 26.06 x 22.93mm
Rs 60.00
Quick Info :
Connector Type : USB Type B Female Socket
Breakout Pins : VBUS, D+, D-, GND
Pin Pitch : 2.54mm
Mounting Style : DIP / Through-Hole
Rs 100.00
Quick Info :
IC Chipset : MAX485
Operating Voltage : 5V DC
Communication Standard : RS-485 (EIA-485)
Max Nodes on Bus : 32 Transceivers
Max Communication Distance : Up to 1200m
Rs 200.00Rs 220.00
Quick Info :
Interface : RS232 (DB9 female) to TTL
Interface Chip : MAX3232
Supply Voltage : 3.3V to 5V DC
Baud Rate : 300 to 115200 bps
TTL Connection : 4-pin header
Rs 390.00
Quick Info :
Fully compliant USB 2.0 standard, backward compatible with USB1.1
Support System: Windows XP, Vista, Windows 7, Linux, MacOS, and WinCE5.0 drive
Supports Plug, Play and hot-swap ( USB side) ;
Rs 450.00Rs 500.00
Quick Info :
Total Resistance : 10KΩ
Wiper Tap Positions : 100
Step Resolution : ~101Ω per Step
Operating Voltage : 3V – 5V DC
Memory Type : Non-Volatile
Rs 640.00Rs 750.00
Quick Info :
Standard USB type A male and TTL 5 pin connector.
5 pins for 3.3V, TXD, RXD, GND & 5V.
Baud rates: 300 bps to 1.5 Mbps
Rs 790.00Rs 850.00
Quick Info :
Data transfer rates from 300 baud to 3 Mbaud (RS422, RS485, RS232) at TTL levels.
Integrated +3.3V level converter for USB I/O
Integrated level converter on UART and CBUS for interfacing to between +1.8V and +5V logic.
Rs 400.00Rs 590.00
Quick Info :
4 channels can convert up to 4 logic signals
Can convert between 1.8V, 2.8V, 3.3V and 5V logic circuits
Bi-directional so can work with bi-directional buses such as I2C
Utilizes N-Ch MOSFET transistors for level translation
Rs 100.00Rs 150.00
Quick Info :
Resolution 640×480 VGA
Flicker (50/60 Hz) auto detection
Onboard regulator, only single 3.3V supply needed
Rs 680.00Rs 925.00
Quick Info :
Maximum output power: 3W*2(5V 4Ω)
Built with switch Potentiometer
Rs 290.00Rs 320.00
Quick Info :
5W Output at 10% (Total Harmonic Distortion
3W Output at 10% THD with a 4Ω Load and 5V Power Supply
Rs 290.00Rs 390.00
Quick Info :
Microcontroller: ATmega328
Board Power Supply: 3.35 -12 V (3.3V model) or 5 – 12 V (5V model)
Circuit Operating Voltage: 3.3V or 5V (depending on model)
Digital I/O Pins: 14
PWM Pins: 6
Rs 980.00Rs 1,590.00
Quick Info :
Microcontroller : ATmega2560
Operating Voltage : 5V
Input Voltage (recommended) : 7-12V
Input Voltage (limit) : 6-20V
Digital I/O Pins : 54 (of which 15 provide PWM output)
Analog Input Pins : 16
Rs 5,450.00Rs 5,900.00
Quick Info :
Realtek AMB82-Mini IoT AI Camera, Arduino Dev, 1080p Sensor, Multiple IO
Wi-Fi, Bluetooth, 1080p Sensor, H264/H265 Video, Multiple IO, Tensorflow-Lite AI
Equipped with Ultra-Low-Power AI Wi-Fi IP Camera SoC for rapid boot-up and low power consumption
Rs 19,500.00
Quick Info:
Processor : 1.2GHz Quad-Core ARM Cortex-A53
RAM : 1GB LPDDR2
Wireless : 2.4GHz 802.11n WiFi
USB Ports : 4 x USB 2.0
GPIO : 40-Pin Header
Rs 19,800.00
Quick Info :
OLED Driver IC: SSD1306
Color: White
Resolution: 128 x 64
Visual Angle: >160°
Input Voltage: 3.3V ~ 6V
Compatible I/O Level: 3.3V, 5V
Rs 680.00Rs 990.00
Quick Info:
Frequency : 2.4GHz (2400–2500MHz ISM)
Gain : 3dBi
Impedance : 50Ω
VSWR : ≤ 1.5
Antenna Connector : SMA male
Cable Connector : U.FL / IPEX / IPX
Cable Length : ~100mm
Max Input Power : 50W
Compatible With : ESP32 / ESP32-CAM / ESP8266 / U.FL modules
Rs 300.00Rs 350.00
Quick Info:
Rotation Angle : 180°
Stall Torque : 23.5 kg.cm @6.8V
Operating Voltage : 4.8V – 6.8V
Weight : 60g
Rs 2,950.00Rs 3,200.00
Quick Info:
Model : WL-800
Working Voltage : DC 18V
Speed Range : 5000 – 18000 RPM
Cable Length : 90cm
Rs 7,850.00
Quick Info:
Material : PLA+
Diameter : 1.75mm
Net Weight : 500g
Printing Temperature : 210°C – 230°C
Rs 2,950.00Rs 3,200.00
Quick Info:
Material : PLA+
Diameter : 1.75mm
Net Weight : 500g
Color : Blue
Rs 2,950.00Rs 3,200.00
Quick Info:
Socket Type : BA15S
Terminal Type : Screw Terminal (Single-Contact)
Material : Nickel-Plated Metal, Brass Contact
Wiring : Not Included
Rs 80.00Rs 100.00
Quick Info:
Configuration : 1S (Single Cell)
Continuous Discharge Current : 12A
Overcurrent Detection Current : 15A
Charging Voltage : 4.2V
Rs 180.00Rs 225.00
Quick Info:
Material : PETG
Diameter : 1.75mm
Net Weight : 1kg
Color : Solid White
Print Temperature : 230°C to 250°C
Bed Temperature : 60°C to 80°C
Rs 4,950.00Rs 5,500.00
Quick Info:
Display Type : 16×2 Alphanumeric LCD
Interface : I2C/IIC (4-pin)
Operating Voltage : 5V DC
Backlight Color : Blue with white text
Rs 750.00Rs 950.00
Quick Info:
Cable Standard : USB 2.0
Length : 1.5 Meters
Connector A : USB Type-A Male
Connector B : USB Type-B Male
Max Speed : 480 Mbps
Compatibility : Printers & Scanners
Rs 390.00Rs 400.00
Quick Info:
Model : E18-D80NK
Supply Voltage : 5VDC
Detection Range : 3cm to 80cm, adjustable
Output Type : NPN, digital (normally open)
Response Time : Less than 2ms
Rs 650.00Rs 850.00
Quick Info:
Product Type : 3D Printed Desk Companion
Design : Yeti figurine
Material : PLA+
Kit Includes : Yeti Body, Floorboard, Electronic Housing, Screws
Electronics : Not included (sold separately)
Assembly : Screw-fit, no glue needed
Electronic Housing : Internal compartment for embedded projects
Finish : Matte FDM surface
Rs 1,250.00Rs 1,550.00
Quick Info:
Compatible Bottle Neck Size : 55-60mm
Battery Capacity : 1200mAh – 1500mAh Li-ion
Charging Input : USB, 5V
Auto Shut-Off Time : 60 Seconds
Housing Material : ABS Plastic
Rs 990.00Rs 1,200.00
