Best Seller Items
-
360 Degree Rotary Encoder Module
Quick Info :
- Incremental Encoder
- Supply Voltage: 3-5V
- Left/Right rotary output pulse, each circle with 20 pulse
- Built in 10k resistor
- Cycles per revolution (CPR): 20
Rs 350.00360 Degree Rotary Encoder Module
Rs 350.00 -
1K – 100K Potentiometer
Quick Info :
- 1K, 5K, 10K, 50K, 100K Ohm
- Linear taper, carbon film type
- Single-Turn
Rs 30.00 – Rs 100.001K – 100K Potentiometer
Rs 30.00 – Rs 100.00 -
-
ESP8266 ESP-01 WIFI module
Quick Info :
- 802.11 b/g/n
- Operating Voltage: 3.3V
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
Rs 590.00ESP8266 ESP-01 WIFI module
Rs 590.00 -
NodeMCU Wi-Fi Development Board
Quick Info :
- Microcontroller: ESP8266
- Operating Voltage: 3.3V
- Input Voltage: 7-12V
- Digital I/O Pins (DIO): 16
- Analog Input Pins (ADC): 1
Rs 1,150.00Rs 1,450.00NodeMCU Wi-Fi Development Board
Rs 1,150.00Rs 1,450.00 -
600W AC to DC Converter Adjustable Variable Power Supply 0-15VDC 0-50A
Quick Info :
- Dual adjustable controls: 0-15V DC voltage, 0-50A current
- High power capacity: 600W maximum output
- LCD display for real-time voltage and current monitoring
- Selectable input: 110 or 240V AC worldwide compatibility
- Independent voltage and current control knobs
- Multiple safety protections: overload, overvoltage, short-circuit
- Professional grade for lab testing and high-power applications
Rs 14,000.00Rs 15,500.00600W AC to DC Converter Adjustable Variable Power Supply 0-15VDC 0-50A
Rs 14,000.00Rs 15,500.00
-
DS3231 Real Time Clock Module
Quick Info :
- Operating voltage : 2.3V – 5.5V
- Battery not included
- Battery : CR2032
Rs 590.00DS3231 Real Time Clock Module
Rs 590.00 -
DS1302 Real Time Clock Module
Quick Info
- Supply voltage (typically): 3.3V
- Battery not included
- Battery : CR2032
Rs 790.00DS1302 Real Time Clock Module
Rs 790.00 -
AT24C256 I2C interface EEPROM Memory Module
Quick Info:
- Onboard chip AT24C256 chip
- Onboard the I2C communications required pull-up resistor
- All pins are leads and marked
- PCB board Dimensions : 36.5 (mm) x12 (mm)
Rs 390.00 -
FPV Pan/Tilt Camera Mount
Quick Info :
- Weight: 38g
- Size: 70x38x36mm
- Compatible Servos : Servo 9g or Servo MG90S
Rs 250.00FPV Pan/Tilt Camera Mount
Rs 250.00 -
Ultrasonic Sensor Bracket
Quick Info :
- Acrylic Body.
- Easy to install.
- Compatible with HC-SR04
Rs 190.00Ultrasonic Sensor Bracket
Rs 190.00 -
2 channel 5V DC OMRON Solid State Relay Module
Quick Info :
- Channels : 2
- Input release voltage: 3.5 to 5V
- Rated load voltage: 100V to 240V AC
- Load current: 0.10 to 2A
Rs 1,150.002 channel 5V DC OMRON Solid State Relay Module
Rs 1,150.00 -
4 channel 5V DC OMRON Solid State Relay Module
Quick Info :
- Channels : 4
- Input release voltage: 3.5 to 5V
- Rated load voltage: 100V to 240V AC
- Load current: 0.10 to 2A
Rs 1,600.004 channel 5V DC OMRON Solid State Relay Module
Rs 1,600.00 -
Keypad Flexible 12 Keys
Quick Info :
- 12-key membrane switch pad has 7 pin female header on end of flat cable
- White sticker on back can be peeled off for adhesive mounting
Rs 250.00Keypad Flexible 12 Keys
Rs 250.00 -
-
RGB SMD LED Board Module 5050
Quick Info :
- uses the 5050 full-color LED
- Operating voltage: 5V
- by adjusting the three primary colors can be mixed PWM get different colors
Rs 100.00RGB SMD LED Board Module 5050
Rs 100.00 -
MAX7219 8 Way Display Module
Quick Info :
- Eight 7-Segment LED Displays with 0.36″ high red digits
- LED displays mounted in sockets
- Built-in MAX7219 LED Driver
- SPI 3-wire serial interface for easy hookup to MCU
- Can daisy-chain multiple modules together for larger displays
Rs 590.00MAX7219 8 Way Display Module
Rs 590.00 -
MAX7219 8 X 8 LED Dot Matrix Module V2
Quick Info :
- Single 8×8 LED Matrix Display with 1.3″ high bright red display
- Built-in MAX7219 LED Driver
- SPI 3-wire serial interface for easy hookup to MCU
Please note that the Jumper Cables need to be purchased separately
Rs 900.00MAX7219 8 X 8 LED Dot Matrix Module V2
Rs 900.00 -
LCD 20×4 Character Module
Quick Info :
- Interface : I2C
- I2C Address : 0x3F
- Supply voltage : 5V
- Contrast Adjust : Through Potentiometer
- Backlight : Blue
Rs 1,100.00LCD 20×4 Character Module
Rs 1,100.00 -
LCD 20×4 Character Module with I2C Adapter
Quick Info :
- Interface : I2C
- I2C Address : 0x3F
- Supply voltage : 5V
- Contrast Adjust : Through Potentiometer
- Backlight : Blue
Rs 1,490.00LCD 20×4 Character Module with I2C Adapter
Rs 1,490.00 -
TM1637 4 Digit LED Display Module
Quick Info :
- Four 7-Segment LED Displays with 0.36″ high red digits
- Built-in TM1637 LED Driver
- 2-wire serial interface for easy hookup to uC
- 3.3 and 5V compatible
Rs 390.00TM1637 4 Digit LED Display Module
Rs 390.00 -
-
LCD 16X2 Keypad Shield
Quick Info :
- Operating Voltage: 5V
- 5 Push buttons.
- Left, Right, Up, Down and Select buttons
- Screen contrast adjustment
- Arduino Reset button
Rs 595.00LCD 16X2 Keypad Shield
Rs 595.00 -
-
Cascaded MAX7219 4 Way LED Dot Matrix Module
Quick Info :
- A single module can drive a total of 8 * 8 dot matrix overcast
- The module voltage: 5V
- Module Size: 12.8 cm (length) X 3.2 cm (width) X 1.3 cm (height)
Rs 1,650.00Cascaded MAX7219 4 Way LED Dot Matrix Module
Rs 1,650.00 -
DC Power Adapter Board
Quick Info :
- Module Size: 2.8cm * 1.3cm
- Applicable connector: 5.5 * 2.1mm
- Power output interface: 2 channel VCC, 2 channel GND
- Net Weight: 3.2g
Rs 100.00DC Power Adapter Board
Rs 100.00 -
RS232 Serial Port To TTL Converter Module
Quick Info :
- Chipset: MAX3232
- Working Voltage: 3.3V-5.5V
- Port: TX RX VCC GND
Rs 390.00 -
X9C103S Digital Potentiometer Module
Quick Info :
- Simple 3 pin interface to control the resistance
- Supply voltage: 3V-5V
- Chip: X9C103S
- PCB board size: 2.7 * 1.3CM
- 10K span potentiometer.
Rs 590.00X9C103S Digital Potentiometer Module
Rs 590.00 -
USB to TTL Converter CP2102 (5 Pin)
Quick Info :
- Standard USB type A male and TTL 5 pin connector.
- 5 pins for 3.3V, TXD, RXD, GND & 5V.
- Baud rates: 300 bps to 1.5 Mbps
Rs 790.00USB to TTL Converter CP2102 (5 Pin)
Rs 790.00 -
OV7670 Camera Module
Quick Info :
- Resolution 640×480 VGA
- Flicker (50/60 Hz) auto detection
- Onboard regulator, only single 3.3V supply needed
Rs 590.00Rs 925.00OV7670 Camera Module
Rs 590.00Rs 925.00 -
TDA7297 15+15W Dual Bridge Amplifier Module
Quick Info:
- Working voltage: 6 to 18V
- Dual channel 15W+15W
- on-board dial potentiometer
Rs 590.00 -
PAM8406 5W Audio Amplifier
Quick Info :
- 5W Output at 10% (Total Harmonic Distortion) THD with a 2Ω Load and 5V Power Supply at Class-D Mode
- 3W Output at 10% THD with a 4Ω Load and 5V Power Supply
Rs 550.00PAM8406 5W Audio Amplifier
Rs 550.00 -
ATtiny85 Development Board
Quick Info:
- Support for the Arduino IDE 1.0+ (OSX/Win/Linux)
- Power via USB or External Source
- Onboard 5V Regulator
- 6 I/O Pins
Rs 450.00ATtiny85 Development Board
Rs 450.00 -
Arduino Compatible Sensor Shield
Quick Info :
- Suitable for Arduino UNO and Mega Boards
- IIC, Bluetooth, SD Card Interface
- APC220 wireless RF module communication interface
- RB URF v1.1 ultrasonic sensors interface
- 128 x 64 LCD parallel and 32 servo controller interface
Rs 550.00Arduino Compatible Sensor Shield
Rs 550.00 -
Arduino Compatible Mega 2560 With USB Cable
Quick Info :
- Microcontroller : ATmega2560
- Operating Voltage : 5V
- Input Voltage (recommended) : 7-12V
- Input Voltage (limit) : 6-20V
- Digital I/O Pins : 54 (of which 15 provide PWM output)
- Analog Input Pins : 16
Rs 6,100.00Arduino Compatible Mega 2560 With USB Cable
Rs 6,100.00 -
Arduino Compatible LilyPad
Quick Info :
- Microcontroller: ATMega32u4
- Operating Voltage: 3.3V
- Digital I/O pins: 9 (4 PWM)
- Analog Input Pins: 4
Rs 1,850.00Arduino Compatible LilyPad
Rs 1,850.00 -
Arduino Compatible Leonardo
Quick Info :
- Microcontroller: ATmega32u4
- Operating Voltage: 5V
- Digital I/O Pins: 20
- PWM Channels: 7
- Analog Input Channels: 12
Rs 2,990.00Arduino Compatible Leonardo
Rs 2,990.00