Best Seller Items
-
-
2 – 10 Pin JST XH 2.54 Pitch Connector Cable and Base
Quick Info:
- Wire Type : 26AWG
- Pitch: 2.5mm±0.05
- length: 15cm
Rs 25.00 – Rs 75.00 -
Jumper Wire Male-Male 20cm
Quick Info :
- Connector : Male to Male
- 1 Cable : Rs. 6
- 1 Set (40pcs) : Rs. 240
Rs 6.00Jumper Wire Male-Male 20cm
Rs 6.00 -
Jumper Wire Male-Female 30cm
Quick Info :
- Connector : Male to Female
- 1 Cable : Rs. 8
- 1 Set (40pcs) : Rs. 320
Rs 8.00Jumper Wire Male-Female 30cm
Rs 8.00 -
Jumper Wire Male-Female 20cm
Quick Info :
- Connector : Male to Female
- 1 Cable : Rs. 6
- 1 Set (40pcs) : Rs. 240
Rs 6.00Jumper Wire Male-Female 20cm
Rs 6.00 -
Jumper Wire Male-Male 30cm
Quick Info :
- Connector : Male to Male
- 1 Cable : Rs. 8
- 1 Set (40pcs) : Rs. 320
Rs 8.00Jumper Wire Male-Male 30cm
Rs 8.00
-
USB Type B to DIP Converter Module
Quick Info :
- Connector Type: USB Type -B
- PCB Size: 20 x 20 mm
- Weight: 4g
Rs 100.00USB Type B to DIP Converter Module
Rs 100.00 -
MAX485 RS485 to TTL module
Quick Info :
- Working voltage：5V
- Connect to 2P terminal on board, for wiring of RS-485 to communicate
Rs 220.00MAX485 RS485 to TTL module
Rs 220.00 -
USB2.0 TO TTL SERIAL 6PIN CONVERTER CH340G
Quick Info :
- Built-in USB to TTL Transfer chip.
- Designed to be used for USB to TTL electronic projects.
- TTL interface output. easy to connect to your MCU.
Rs 490.00 -
RS232 Serial Port To TTL Converter Module
Quick Info :
- Chipset: MAX3232
- Working Voltage: 3.3V-5.5V
- Port: TX RX VCC GND
Rs 390.00 -
USB to RS485 Converter Adapter
Quick Info :
- Fully compliant USB 2.0 standard, backward compatible with USB1.1
- Support System: Windows XP, Vista, Windows 7, Linux, MacOS, and WinCE5.0 drive
- Supports Plug, Play and hot-swap ( USB side) ;
Rs 450.00USB to RS485 Converter Adapter
Rs 450.00 -
HX711 Load Cell Amplifier
Quick Info :
- Operation Voltage: 2.7V-5V
- Operation Current: < 1.5mA
- Sample rate: 10Hz
- Simultaneous 50 and 60Hz supply rejection
- Available Load Cells 5kg, 10kg or 20kg
Rs 290.00HX711 Load Cell Amplifier
Rs 290.00 -
-
USB to TTL Converter CP2102 (5 Pin)
Quick Info :
- Standard USB type A male and TTL 5 pin connector.
- 5 pins for 3.3V, TXD, RXD, GND & 5V.
- Baud rates: 300 bps to 1.5 Mbps
Rs 790.00USB to TTL Converter CP2102 (5 Pin)
Rs 790.00 -
FT232RL USB to TTL Converter
Quick Info :
- Data transfer rates from 300 baud to 3 Mbaud (RS422, RS485, RS232) at TTL levels.
- Integrated +3.3V level converter for USB I/O
- Integrated level converter on UART and CBUS for interfacing to between +1.8V and +5V logic.
Rs 590.00FT232RL USB to TTL Converter
Rs 590.00 -
Logic Level Converter Bi-Directional Module 5V to 3.3V
Quick Info :
- 4 channels can convert up to 4 logic signals
- Can convert between 1.8V, 2.8V, 3.3V and 5V logic circuits
- Bi-directional so can work with bi-directional buses such as I2C
- Utilizes N-Ch MOSFET transistors for level translation
Rs 100.00 -
PAM8403 Mini 5V Digital Amplifier Board
Quick Info :
- Maximum output power: 3W*2(5V 4Ω)
- Built with switch Potentiometer
Rs 320.00PAM8403 Mini 5V Digital Amplifier Board
Rs 320.00 -
TDA2030 Audio Amplifier Module
Quick Info :
- 18 W mono amplifier circuit design
- On-board 10K potentiometer for volume adjustment
- Operating Voltage Range: 6 V to 12 V
Rs 350.00TDA2030 Audio Amplifier Module
Rs 350.00 -
PAM8403 3W Audio Amplifier
Quick Info:
- Supply Voltage: 5VDC
- 3W Output at 10% THD with a 4Ω Load and 5V Power Supply
Rs 190.00PAM8403 3W Audio Amplifier
Rs 190.00 -
MT8870 DTMF Voice Module
Quick Info :
- MT8870 Frequency decoder chip
- Onboard 3.5mm input interface
- 5V Input
- Designed to be compatible with standard 2.54mm sockets
Rs 490.00MT8870 DTMF Voice Module
Rs 490.00 -
NodeMCU Wi-Fi Development Board
Quick Info :
- Microcontroller: ESP8266
- Operating Voltage: 3.3V
- Input Voltage: 7-12V
- Digital I/O Pins (DIO): 16
- Analog Input Pins (ADC): 1
Rs 1,150.00Rs 1,450.00NodeMCU Wi-Fi Development Board
Rs 1,150.00Rs 1,450.00 -
Arduino Compatible Uno R3
Quick Info:
- ATmega328P chip
- 14 digital I/O pins
- 6 analog input pins,
- a USB connection,
- A Power barrel jack,
- ICSP header and a reset button.
- crystal oscillator, serial communication, voltage regulator
Rs 2,590.00Rs 2,850.00Arduino Compatible Uno R3
Rs 2,590.00Rs 2,850.00 -
Arduino Compatible Sensor Shield
Quick Info :
- Suitable for Arduino UNO and Mega Boards
- IIC, Bluetooth, SD Card Interface
- APC220 wireless RF module communication interface
- RB URF v1.1 ultrasonic sensors interface
- 128 x 64 LCD parallel and 32 servo controller interface
Rs 550.00Arduino Compatible Sensor Shield
Rs 550.00 -
Arduino Compatible Pro Mini
Quick Info :
- Microcontroller: ATmega328
- Board Power Supply: 3.35 -12 V (3.3V model) or 5 – 12 V (5V model)
- Circuit Operating Voltage: 3.3V or 5V (depending on model)
- Digital I/O Pins: 14
- PWM Pins: 6
Rs 1,350.00Rs 1,790.00Arduino Compatible Pro Mini
Rs 1,350.00Rs 1,790.00 -
Arduino Nano Compatible
Quick Info:
- Microcontroller: ATmega328
- Operating Voltage: 5 V
- Analog I/O Pins: 8
- Input Voltage: 7-12 V
- Digital I/O Pins: 22
Rs 1,290.00Rs 1,450.00Arduino Nano Compatible
Rs 1,290.00Rs 1,450.00 -
Realtek AMB82-Mini IoT AI Camera
Quick Info :
- Realtek AMB82-Mini IoT AI Camera, Arduino Dev, 1080p Sensor, Multiple IO
- Wi-Fi, Bluetooth, 1080p Sensor, H264/H265 Video, Multiple IO, Tensorflow-Lite AI
- Equipped with Ultra-Low-Power AI Wi-Fi IP Camera SoC for rapid boot-up and low power consumption
Rs 19,500.00Realtek AMB82-Mini IoT AI Camera
Rs 19,500.00 -
Quadcopter Drone ESP32 WiFi V1 Alphatronic
Quick info :
- WiFi controlled: Operated through a smartphone.
- MPU6050 IMU for stability control.
- All-in-one PCB: No need for additional 3D printed parts.
- Easily upgradable: Can incorporate extra features like position hold or height hold using external modules.
- Compact and lightweight.
- Built-in battery charger.
- Built-in USB interface for programming and debugging.
Rs 14,500.00Quadcopter Drone ESP32 WiFi V1 Alphatronic
Rs 14,500.00 -
5A Overcurrent Protection Sensor Module with 12V Relay Switch
Quick info :
- Operating voltage: DC12V;
- Operating current: <20MA;
- Operating frequency range: 20Hz ~ 400Hz;
- Output mode: switch signal output;
- Maximum detection wire diameter: 5.2mm;
Rs 950.00 -
125 kHz NFC USB RFID Card Reader
Quick info:
- Plug-and-Play: Easy setup with USB 2.0 interface
- Compatibility: ISO 14443 Type A/B, ISO 15693, and NFC cards
- Data Transfer speed: 106 kbps, 212 kbps, and 424 kbps
- Power Supply: 5V DC
Rs 2,100.00125 kHz NFC USB RFID Card Reader
Rs 2,100.00 -
FM Wireless Microphone
Quick Info :
- Microphone With Bluetooth Transmitter.
- Experience seamless audio with wireless technology, ensuring a stable signal for your karaoke sessions.
- High Signal-to-Noise Ratio:Enjoy crystal-clear sound with a 70dB signal-to-noise ratio, perfect for professional karaoke performances.
- Long Range Receiving Distance.
Rs 3,290.00FM Wireless Microphone
Rs 3,290.00 -
Bluetooth Car Kit 50W
Quick info :
- 6.5MM Microphone function
- Bluetooth version 5.0
- Power supply voltage: 12V (range 7V-16V) and current not less than 2A.
- SD Card function.
- Music format: MP3/WMA/WAV/APE/FLAC lossless music format.
- Radio FM frequency: 87.5—107.5mhz.
Rs 1,750.00Bluetooth Car Kit 50W
Rs 1,750.00 -
4CH Remote Control Circuit PCB Transmitter and Receiver Board
Quick Info :
- Transmitter PCB Supply Voltage : 3V
- Receiver PCB Supply Voltage : 4.5V to 6V
- Working range: 40m – 50m
Rs 1,290.00 -
NE5532 Tone Control Preamplifier Module
Quick Info :
Model: NE5532
Supply Voltage:Dual Power AC 12V – 18V
Number of Channel: Dual-channel Audio
Adjustment Types: 4 channels(treble+alto+bass+volume)Rs 1,890.00NE5532 Tone Control Preamplifier Module
Rs 1,890.00 -
NPK Soil Sensor RS485
Quick Info :
- Units of measurement : mg/kg(mg/L)
- Measurement parameters : Soil Nitrogen, Phosphorus, Potassium
- Measurement range : 0-1999mg/kg(mg/L)
- Measurement accuracy : ±3%(mg/kg)
- Resolution : 1mg/kg(mg/L)
- Supply voltage : 5-30V DC
Rs 26,990.00NPK Soil Sensor RS485
Rs 26,990.00 -
1.28-Inch Round LCD TFT Display GC9A01
Specification:
- Size: 1.28inch
- Resolution: 240 × 240
- Driving chip: GC9A01
- Interface method: SPI
- Color: Full-color RGB
Rs 2,190.001.28-Inch Round LCD TFT Display GC9A01
Rs 2,190.00 -
ESP32-C3 Supermini
Quick Info :
- 13 programmable GPIOs
- Power
– 5v
– 3.3v - Digital interfaces:
– 1 × SPI
– 1 × UART
– 1 × I2C
– 1 × I2S
– 1 x LED PWM controller - Analog interfaces:
– 2 × 12-bit SAR ADCs, up to 6 channels
Rs 1,890.00ESP32-C3 Supermini
Rs 1,890.00 -
Microchip PIC16F877A MCU Development Board
Quick Info :
- The PIC16F877A development board, enables easy development and testing of various solutions.
- PIC16F877A Chip IC is included with power supply components and crystals.
“>
Rs 5,450.00Microchip PIC16F877A MCU Development Board
Rs 5,450.00 -
TPA3116D2 Digital Power Amplifier Board 50W+50W
Quick Info :
- Audio type: TPA3116D2
- Input voltage: DC 5V~DC 24V
- Output power: 2 x 50 W
- Output type: Double Track, Stereo
Rs 2,150.00TPA3116D2 Digital Power Amplifier Board 50W+50W
Rs 2,150.00 -
W5500 Ethernet Module
Quick Info :
- WIZnet W5500 Ethernet controller
- Compatible withWIZ850io
- Magjack RJ-45 CAT network connector
- Acts as client or server
- TCP/IP protocols include TCP, UDP, ICMP, IPv4 ARP, IGMP, PPPoE
- 10BaseT/100BaseTX Ethernet PHY embedded
Rs 2,290.00W5500 Ethernet Module
Rs 2,290.00 -
3 Pin Cable Molex Connector 2.54mm Pitch
Quick Info :
- Wire Type : 22AWG
- Pitch: 2.54mm±0.05
- Length: 15cm
Rs 50.00 -
2 Pin Cable JST VHR-2N 3.96mm Pitch
Quick Info:
- Product Name : JST PH
- Wire Type : 22AWG
- Pitch: 3.96mm±0.05
- Length: 15cm
Rs 50.002 Pin Cable JST VHR-2N 3.96mm Pitch
Rs 50.00