Quick Info :
Name: TT motor
Type: 1:48
Speed: 45±10%r/min 90±10%r/min
Rated voltage: 3V/6V
Rs 350.00
Quick Info :
Channels : 2
Input release voltage: 3.5 to 5V
Rated load voltage: 100V to 240V AC
Load current: 0.10 to 2A
Rs 1,150.00
Quick Info :
Channel : 4
Coil sensitivity = 5VDC
Maximum Contact capacity = 250VAC/10VDC
Maximum Current capacity = 10A
Rs 790.00
Quick Info :
Channel : 1
Coil sensitivity = 5VDC
Maximum Contact capacity = 250VAC/10VDC
Maximum Current capacity = 10A
Rs 250.00Rs 390.00
Quick Info :
Arduino and Raspberry Pi compatible
16-key membrane switch pad has 8 pin female header on end of flat cable
White sticker on back can be peeled off for adhesive mounting
Rs 290.00
Quick Info :
OLED Driver IC: SSD1306
Resolution: 128 x 64
Visual Angle: >160°
Input Voltage: 3.3V ~ 6V
Compatible I/O Level: 3.3V, 5V
Rs 750.00Rs 990.00
Quick Info :
A single module can drive 8 by 8 common cathodes
Module Operating voltage: 5V.
Module size: 5 cm long X 3.2 cm wide X 1.5 cm high
Module with input and output interfaces, supports multiple modules cascade
Led colour:Red
Rs 800.00
Quick Info :
Operating Voltage: 5V
Backlight and Contrast is adjusted by potentiometer
Compatible for 16×2 , 16×4 and 20×4 LCD
Rs 250.00Rs 390.00
Quick Info :
Operating Voltage is 4.7V to 5.3V
Current consumption is 1mA without backlight
Alphanumeric LCD display module, meaning can display alphabets and numbers
Consists of two rows and each row can print 16 characters.
Compatible with LCD to I2C Adapter Board
Rs 460.00Rs 490.00
Quick Info :
Size: 48mm x 29mm x 26mm.
Display color: Red & Blue LED (dual display).
Display: 0.28″ LED digital.
Operating voltage: DC 4.5 ~ 30V.
Measure voltage: DC 0 ~ 100V.
Measure current: 10A (direct measurement, built-in shunt).
Rs 690.00
Quick Info :
USB Type : Micro USB
Header : 2.54mm
Material : Plastic
Size(L*W) : Approx. 26.06 x 22.93mm
Rs 100.00
Quick Info :
Connector Type: USB Type -B
PCB Size: 20 x 20 mm
Weight: 4g
Rs 100.00
Quick Info :
Built-in USB to TTL Transfer chip.
Designed to be used for USB to TTL electronic projects.
TTL interface output. easy to connect to your MCU.
Rs 490.00
Quick Info :
Chipset: MAX3232
Working Voltage: 3.3V-5.5V
Port: TX RX VCC GND
Rs 390.00
Quick Info :
Fully compliant USB 2.0 standard, backward compatible with USB1.1
Support System: Windows XP, Vista, Windows 7, Linux, MacOS, and WinCE5.0 drive
Supports Plug, Play and hot-swap ( USB side) ;
Rs 450.00
Quick Info :
Operation Voltage: 2.7V-5V
Operation Current: < 1.5mA
Sample rate: 10Hz
Simultaneous 50 and 60Hz supply rejection
Available Load Cells 5kg, 10kg or 20kg
Rs 290.00
Quick Info :
Standard USB type A male and TTL 5 pin connector.
5 pins for 3.3V, TXD, RXD, GND & 5V.
Baud rates: 300 bps to 1.5 Mbps
Rs 790.00
Quick Info :
Data transfer rates from 300 baud to 3 Mbaud (RS422, RS485, RS232) at TTL levels.
Integrated +3.3V level converter for USB I/O
Integrated level converter on UART and CBUS for interfacing to between +1.8V and +5V logic.
Rs 590.00
Quick Info :
Maximum output power: 3W*2(5V 4Ω)
Built with switch Potentiometer
Rs 320.00
Quick Info:
Supply Voltage: 5VDC
3W Output at 10% THD with a 4Ω Load and 5V Power Supply
Rs 190.00
Quick Info :
MT8870 Frequency decoder chip
Onboard 3.5mm input interface
5V Input
Designed to be compatible with standard 2.54mm sockets
Rs 490.00
Quick Info:
ATmega328P chip
14 digital I/O pins
6 analog input pins,
a USB connection,
A Power barrel jack,
ICSP header and a reset button.
crystal oscillator, serial communication, voltage regulator
Rs 2,190.00Rs 2,590.00
Quick Info :
Microcontroller: ATmega328
Board Power Supply: 3.35 -12 V (3.3V model) or 5 – 12 V (5V model)
Circuit Operating Voltage: 3.3V or 5V (depending on model)
Digital I/O Pins: 14
PWM Pins: 6
Rs 1,190.00Rs 1,590.00
Quick Info :
Realtek AMB82-Mini IoT AI Camera, Arduino Dev, 1080p Sensor, Multiple IO
Wi-Fi, Bluetooth, 1080p Sensor, H264/H265 Video, Multiple IO, Tensorflow-Lite AI
Equipped with Ultra-Low-Power AI Wi-Fi IP Camera SoC for rapid boot-up and low power consumption
Rs 19,500.00
Quick info :
WiFi controlled: Operated through a smartphone.
MPU6050 IMU for stability control.
All-in-one PCB: No need for additional 3D printed parts.
Easily upgradable: Can incorporate extra features like position hold or height hold using external modules.
Compact and lightweight.
Built-in battery charger.
Built-in USB interface for programming and debugging.
Rs 14,500.00
Quick Info :
Incremental Encoder
Supply Voltage: 3-5V
Left/Right rotary output pulse, each circle with 20 pulse
Built in 10k resistor
Cycles per revolution (CPR): 20
Rs 350.00
Quick Info :
Microcontroller: ATmega32u4
Operating Voltage: 5V
Digital I/O Pins: 20
PWM Channels: 7
Analog Input Channels: 12
Rs 2,990.00
Quick info :
Input Type: Analog
Operating voltage: DC12-24V
Output power: 50w*2+100w subwoofer*1
Output load : 4-8Ω
Rs 1,790.00
Quick info :
The fuse holder works with any 2-30 amp blade fuse.
The structure of the fuse holder provides extra protection against water and dust.
Rs 190.00
