Quick Info :
MAX485 chip-based for reliable RS485 communication
Compatible with 3.3V and 5V power supplies
Built-in 120-ohm termination resistor (jumper selectable)
RX/TX LED indicators for signal monitoring
Rs 230.00
Quick info :
Model: TTP223.
Dimensions: 15mm x 11mm.
Input Voltage: 2 Volt – 5.5 Volts DC.
Rs 60.00
Quick Info :
High Voltage Outputs: 50V
Inputs Compatible with Popular Logic Types (5V TTL – Arduino Compatible)
Relay Driver Applications
Rs 230.00Rs 390.00
Quick Info :
Input Voltage : 24V
Input Current : 0.8A
Atomization Amount : 350ML/H
Use Water Depth : 4-9cm
Operating Temperature : 1-50
Power Lead Length : 150cm
Nozzle Size : 4.65~4cm
Rs 2,590.00
Quick info:
Diameter:20mm
Operating Voltage:3.7-12V
Frequency:113+/-3KHz
Rs 1,690.00
Quick Info :
Operating Voltage : 5V
Pin pitch : 2.54mm
Operating Current : 500mA (MAX)
Total Size : 25 x 17 x 10mm/1 x 0.68 x 0.4in(L*W*H)
Rs 100.00
Quick Info:
PC Interface : USB 2.0 Type-A Male
Device Interface : DB9 Male (RS232)
Data Transfer Rate : Up to 921.6Kbps
OS Support : Windows / macOS / Linux
Cable Length : Approximately 1 metre
Bus Powered : Yes (5V USB)
Plug and Play : Yes
Rs 1,580.00Rs 1,700.00
Quick Info:
Interface : USB 3.0
Supported Cards : SD, TF (MicroSD)
Transfer Speed : Up to 5 Gbps
Compatibility : Windows, macOS, Linux
Driver Required : No (Plug and Play)
Power : Bus Powered via USB
Rs 850.00Rs 950.00
Quick Info :
Resolution: 1080P Full HD (1920×1080)
Frame Rate: 30fps
Microphone: Built-in omnidirectional
Interface: USB 2.0 Plug & Play
FOV: 90° wide angle
Mount: Universal clip-on + tripod
Compatible: Windows, Mac, Linux, Chrome OS
Rs 2,850.00Rs 3,200.00
Quick Info :
Dimensions : 31mm X 15mm X 5mm / 1.22 X 0.59 X 0.19 inch
Rs 100.00
Quick Info :
Fully compliant USB 2.0 standard, backward compatible with USB1.1
Support System: Windows XP, Vista, Windows 7, Linux, MacOS, and WinCE5.0 drive
Supports Plug, Play and hot-swap ( USB side) ;
Rs 450.00Rs 500.00
Quick Info:
Brand : Waveshare
Host Interface : USB Type-A
Device Interface : RS485 Screw Terminal
Baud Rate : 300bps – 921600bps
Transmission Distance : Up to 1200 metres
Power Supply : USB Bus Powered (5V)
OS Support : Windows / Linux / macOS
Direction Control : Automatic
Rs 3,250.00Rs 3,550.00
Quick Info :
FT232RL+75176 chipset for stable communication
Automatic data flow control – no manual DE/RE control
Supports up to 32 devices on RS485 bus network
Wide baud rate: 300-921600bps with auto-detection
Switchable RS485/TTL modes via 4 jumpers
TVS protection and USB self-recovery features
Self-powered from USB – no external power needed
Rs 950.00
Quick Info :
Standard USB type A male and TTL 5 pin connector.
5 pins for 3.3V, TXD, RXD, GND & 5V.
Baud rates: 300 bps to 1.5 Mbps
Rs 790.00Rs 850.00
Quick Info :
Connector Type : USB Type B Female Socket
Breakout Pins : VBUS, D+, D-, GND
Pin Pitch : 2.54mm
Mounting Style : DIP / Through-Hole
Rs 100.00
Quick Info :
Connector : USB Type-C
Output Type : DIP 2.54 mm
Use Case : Breadboard & PCB Prototyping
Material : FR-4 PCB
Rs 120.00Rs 250.00
Quick Info :
Built-in USB to TTL Transfer chip.
Designed to be used for USB to TTL electronic projects.
TTL interface output. easy to connect to your MCU.
Rs 490.00Rs 550.00
Quick Info :
Voltage: 3.7 – 5V DC
Bluetooth Version: 5.0 (Backward compatible with Bluetooth 4.2, 4.1, 4.0)
Transmission Distance: 15m (Visible)
Audio Decoding: WAV, APE, FLAC, MP3
Dimensions: 30mm x 30mm
Rs 350.00Rs 480.00
Quick Info :
Temperature measurement and programming range: -50°C …110°C
Measurement accuracy: 0.1°C in the range from -9.9°C to 99.9°C; or 1.0°C outside this range
Control accuracy: 0.1°C 0.1°C in the range -9.9°C to 99.9°C; or 1.0°C outside this range
Hysteresis accuracy: 0.1°C
Reading update time: 0.5 seconds
Supply voltage, V: 110-220 AC
Rs 890.00
Quick Info :
Operating voltage:5V (supplied from the Arduino Board)
Ethernet Controller: W5500 with internal 32K buffer
Connection speed: 10/100Mb
Connection with Arduino on SPI port
Rs 4,390.00
Quick Info :
Complies with wireless 802.11n standards
Frequency band: 2.4~2.4835GHz
Data rate up to 150Mbps
Rs 950.00Rs 1,250.00
Quick Info :
Total Resistance : 10KΩ
Wiper Tap Positions : 100
Step Resolution : ~101Ω per Step
Operating Voltage : 3V – 5V DC
Memory Type : Non-Volatile
Rs 640.00Rs 750.00
Quick info :
Operating voltage: 6 – 30V DC
1 Channel delay triggered relay module
Delay time: 0.1 second to 999 minutes
Rs 420.00Rs 590.00
Quick Info :
Length: 190mm
Diameter: 1.2mm steel wire
End Type: Z-type bent ends
Material: High-strength steel
Compatible: SU27KT RC Fixed Wing
Function: Servo push rod linkage
Installation: Tool-free Z-bend fit
Use: Aileron/elevator/rudder control
Rs 280.00Rs 350.00
Quick Info :
Chipset : TDA7498E
Channels : 2.1
Max Power : 160W×2 + 220W
Bluetooth : Version 5.0
Voltage : DC 24–36V
Rs 7,550.00Rs 7,900.00
Quick Info :
Type: Stepper Motor Controller
Power: DC 5-30V
Display: HD LCD + Encoder
Modes: 9 Pre-programmed
Micro-step: Up to 1/128
Note: Driver required (sold separately)
Rs 4,400.00Rs 4,900.00
Quick Info :
Type: Driver + Controller
Power: DC 10-30V
Current: 4A Max Output
Display: HD LCD + Encoder
Modes: 9 Pre-programmed
Direct Drive: No external driver needed
Rs 7,600.00Rs 8,500.00
Quick Info:
Control Voltage : 3V DC
Relay Type : Electromechanical (SPDT)
Contact Configuration : NO, NC, COM
Maximum AC Load : 250V AC / 10A
Maximum DC Load : 30V DC / 10A
Optocoupler Isolation : Yes
Compatible Platforms : ESP8266, ESP32, Arduino (3V logic)
Rs 290.00Rs 350.00
Quick Info :
Channel : 1
Coil sensitivity = 5VDC
Maximum Contact capacity = 250VAC/10VDC
Maximum Current capacity = 10A
Rs 190.00Rs 290.00
Quick Info :
Operating Voltage (Control): 5 V DC
Channels: 1 Channel
Isolation: Optocoupler (Opto-Isolated)
Max Switching Voltage (AC): 250 V AC @ 10 A
Rs 250.00Rs 350.00
Quick info :
Display Size: 1.8″
Driver IC: ST7735
Input Voltage (V): 3.3 to 5
Pixel Resolution: 128 x 160
Interface Type: SPI
Rs 950.00Rs 1,490.00
Quick info:
Plug-and-Play: Easy setup with USB 2.0 interface
Compatibility: ISO 14443 Type A/B, ISO 15693, and NFC cards
Data Transfer speed: 106 kbps, 212 kbps, and 424 kbps
Power Supply: 5V DC
Rs 2,290.00
Quick Info :
Support Card Type: Read-only ID card (EM4100, IM4001)
Support frequency: 125KHz
Reader Time: <0.2s
Read Range: 3-10cm
Rs 990.00
