Modules
-
ESP8266 ESP-01 WIFI module
Quick Info :
- 802.11 b/g/n
- Operating Voltage: 3.3V
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
Rs 490.00Rs 590.00ESP8266 ESP-01 WIFI module
Rs 490.00Rs 590.00 -
Rs 380.00
Rs 400.00FJS23101BH 2.3″ 7-Seg Display CA
Rs 380.00Rs 400.00 -
FM Receiver Board V4M
Quick info:
- Wide Frequency Range – Supports 87.0 MHz to 108.0 MHz for clear FM reception.
- High Sensitivity – Low-noise RF input amplifier ensures strong signal reception.
- Excellent Audio Quality – 50 Hz to 18 kHz frequency response for crisp sound output.
- Compact & Lightweight – Ideal for integration into DIY electronics and audio projects.
- Easy to Integrate – Simple pin connections for quick setup in custom applications.
Rs 1,350.00Rs 1,490.00FM Receiver Board V4M
Rs 1,350.00Rs 1,490.00 -
FT232RL USB to TTL Converter
Quick Info :
- Data transfer rates from 300 baud to 3 Mbaud (RS422, RS485, RS232) at TTL levels.
- Integrated +3.3V level converter for USB I/O
- Integrated level converter on UART and CBUS for interfacing to between +1.8V and +5V logic.
Rs 400.00Rs 590.00FT232RL USB to TTL Converter
Rs 400.00Rs 590.00 -
GPS Active Antenna 1575.42MHz with Cable
Quick Info :
- Antenna Type : Active (LNA + SAW filter integrated)
- Center Frequency : 1575.42MHz (GPS L1)
- Frequency Bandwidth : 1575.42 ± 5MHz
- Polarisation : RHCP (Right-Hand Circular Polarisation)
- Impedance : 50Ω
- Cable Length : 1.5 metres
- Connector : SMA Male (straight)
Rs 850.00Rs 1,100.00GPS Active Antenna 1575.42MHz with Cable
Rs 850.00Rs 1,100.00 -
HC-12 Long Range Wireless Communication Module
Quick Info :
- Working Voltage : 3.2V to 5.5V DC
- Working Current:
- Transmitting: 43 mA
- Receiving: 19 mA
- Sleep Mode: 1.8 mA
- Data Interface : UART/TTL (Serial)
- Working Temperature : -20°C to +70°C
Rs 1,390.00HC-12 Long Range Wireless Communication Module
Rs 1,390.00 -
HC-SR04 Ultrasonic Sensor Acrylic Bracket
Quick Info :
- Compatible Sensor : HC-SR04 Ultrasonic Module
- Material : Acrylic
- Mounting Hole Diameter : 3.8mm
- Mounting Hardware : Not included (M3 screws recommended)
Rs 120.00Rs 130.00HC-SR04 Ultrasonic Sensor Acrylic Bracket
Rs 120.00Rs 130.00 -
Hex Coupler 4mm Bore Motor Shaft Connector
Quick Info:
- Material : Brass
- Diameter : 4mm
- Hexagonal Side : 7mm
- Fastening Screw : M4
Rs 290.00Rs 350.00Hex Coupler 4mm Bore Motor Shaft Connector
Rs 290.00Rs 350.00 -
INMP441 MEMS I2S Microphone Module
Quick Info :
- Chip : INMP441
- Interface : I2S digital, 24-bit
- Supply Voltage : 1.8V to 3.3V
- Sensitivity : -26 dBFS
- Frequency Response : 60Hz to 15kHz
Rs 450.00Rs 650.00INMP441 MEMS I2S Microphone Module
Rs 450.00Rs 650.00 -
IRF520 MOSFET Driver Module
Quick Info :
- Voltage: 3.3V, 5V
- Output load voltage :0-24V
- Output load current: <5A (1A need to add more heat sink)
Rs 180.00Rs 250.00IRF520 MOSFET Driver Module
Rs 180.00Rs 250.00 -
Isolated MOSFET Driver Module
Quick Info :
- Optocoupler isolation protects control circuits
- Wide input range: 3-20V PWM signals
- High output capacity: DC 3.7-27V, up to 10A
- PWM frequency control: 0-20KHz for speed/brightness adjustment
- Compatible with motors, LED strips, pumps, solenoid valves
- Compact lightweight design at only 15g
- Perfect for Arduino and microcontroller projects
Rs 490.00Isolated MOSFET Driver Module
Rs 490.00 -
JF-0530B Push Pull Solenoid Electromagnet
Quick Info :
- Voltage : 12 V DC
- Current : ~1.0 A
- Force : 5 N
- Stroke : 10 mm
- Type : Push-Pull
Rs 1,050.00Rs 1,250.00JF-0530B Push Pull Solenoid Electromagnet
Rs 1,050.00Rs 1,250.00 -
JGY370 Worm Gear Motor Mount Bracket
Quick Info:
- Compatible Motor : JGY370 worm gear motor
- Bracket Shape : L-shaped, single-side
- Material : Metal with anti-rust coating
- Hardware Included : Mounting screws
- Dimensions: 45x38x30mm
Rs 380.00Rs 400.00JGY370 Worm Gear Motor Mount Bracket
Rs 380.00Rs 400.00 -
JQ6500 Mini MP3 Player Module 16Mbit
Quick Info:
- Flash Memory : 16Mbit (2MB) Onboard
- Supported Formats : MP3, WAV
- Control Interface : UART Serial, I/O Trigger, Push Button
- Operating Voltage : 3.3V – 5V DC
- USB Interface : Micro USB (file upload)
Rs 840.00Rs 900.00JQ6500 Mini MP3 Player Module 16Mbit
Rs 840.00Rs 900.00 -
Keypad Flexible 12 Keys
Quick Info :
- 12-key membrane switch pad has 7 pin female header on end of flat cable
- White sticker on back can be peeled off for adhesive mounting
Rs 250.00Keypad Flexible 12 Keys
Rs 250.00 -
KY-004 Key Switch Module
Quick Info:
- Operating Voltage : 3.3V – 5V DC
- Output Type : Digital (HIGH / LOW)
- Interface : 3-Pin (Signal, VCC, GND)
- Idle Output : HIGH
- Pressed Output : LOW
- Onboard Resistor : Yes
- Compatible With : Arduino, Raspberry Pi, ESP32
Rs 150.00Rs 200.00KY-004 Key Switch Module
Rs 150.00Rs 200.00 -
KY-006 Passive Buzzer Module
Quick Info:
- Buzzer Type : Passive (tone controlled via code)
- Trigger Type : High Level
- Operating Voltage : 3.3V – 5V
- Operating Current : <25mA
- Frequency Range : 1.5kHz – 2.5kHz
- Interface Pins : 3 (Signal, VCC, GND)
- Compatibility : Arduino, ESP32, Raspberry Pi
- PCB Size : 18.5mm × 15mm
Rs 100.00Rs 150.00KY-006 Passive Buzzer Module
Rs 100.00Rs 150.00 -
KY-012 Active Buzzer Module
Quick Info:
- Buzzer Type : Active (Built-in Oscillator)
- Trigger Type : Low Level
- Operating Voltage : 3.3V – 5V
- Operating Current : <30mA
- Output Frequency : ~2.5kHz (fixed)
- Interface Pins : 3 (Signal, VCC, GND)
- Compatibility : Arduino, ESP32, Raspberry Pi
- PCB Size : 18.5mm × 15mm
Rs 100.00Rs 150.00KY-012 Active Buzzer Module
Rs 100.00Rs 150.00 -
KY-016 RGB LED Module 5mm 3 Color
Quick Info:
- LED Type : 5mm Common Cathode RGB
- Operating Voltage : 3.3V – 5V
- Current per Channel : 20mA
- Interface Pins : 4 (R, G, B, GND)
- Compatibility : Arduino, ESP32, Raspberry Pi
- PCB Size : 18.5mm × 15mm
Rs 150.00Rs 200.00KY-016 RGB LED Module 5mm 3 Color
Rs 150.00Rs 200.00 -
KY-023 Dual-Axis XY Joystick Module
Quick Info:
- Input Voltage : 3.3V to 5V DC
- Output Signal : 2 analog (X, Y) + 1 digital (switch)
- Pin Interface : VCC, GND, VRx, VRy, SW
- Dimensions : 34mm x 26mm x 32mm
Rs 200.00Rs 250.00KY-023 Dual-Axis XY Joystick Module
Rs 200.00Rs 250.00 -
KY-029 Dual Color LED Module
Quick Info:
- LED Type : 5mm Dual Color (Red & Green)
- Operating Voltage : 3.3V – 5V
- Current per Channel : 20mA
- Interface Pins : 3 (Red, Green, GND)
- Compatibility : Arduino, ESP32, Raspberry Pi
- PCB Size : 18.5mm × 15mm
Rs 150.00Rs 200.00KY-029 Dual Color LED Module
Rs 150.00Rs 200.00 -
KY-034 Automatic Flashing RGB LED Module
Quick Info:
- LED Type : 5mm Auto-Flashing RGB (Built-in IC)
- Operating Voltage : 3.3V – 5V
- Forward Current : 20mA
- Interface Pins : 3 (Signal, VCC, GND)
- Color Mode : Automatic cycling, no code needed
- Compatibility : Arduino, ESP32, Raspberry Pi
- PCB Size : 18.5mm × 15mm
Rs 150.00Rs 200.00KY-034 Automatic Flashing RGB LED Module
Rs 150.00Rs 200.00 -
L293D Motor Driver Module
Quick Info :
- Operating Voltage – 4.5 V to 36V.
- Compatible with Arduino Uno and Mega
- Compatible Motor and Wheel : DC Gear Motor With Plastic Wheel
Rs 560.00Rs 750.00L293D Motor Driver Module
Rs 560.00Rs 750.00 -
L298N Motor Driver Module
Quick Info
- Operating Voltage : 5 V to 35 V
- Great for 2 Gear motors
- Compatible Motor and Wheel : DC Gear Motor With Plastic Wheel
Rs 520.00Rs 590.00L298N Motor Driver Module
Rs 520.00Rs 590.00 -
L9110S H-Bridge Stepper Motor Driver Module
Quick Info:
- Operating Voltage : 2.5V – 12V DC
- Output Current : 800mA continuous / 1.5A peak
- Channels : 2
- Supported Motors : DC / 4-wire Stepper
- PWM Frequency : Up to 8KHz
- Dimensions : 28mm × 22mm
Rs 200.00Rs 250.00L9110S H-Bridge Stepper Motor Driver Module
Rs 200.00Rs 250.00 -
LCD 20×4 Character Module Blue
Quick Info:
- Display Format : 20 Characters x 4 Lines
- Controller : HD44780 (or Compatible)
- Backlight Color : Blue
- Supply Voltage : 5V DC
Rs 1,020.00Rs 1,250.00LCD 20×4 Character Module Blue
Rs 1,020.00Rs 1,250.00 -
LED 5mm Bulb Common Anode
Specification:
- 5mm Round Standard Directivity
- Color : Red, Blue, Green, White, Yellow
- Forward Current (IF): 30mA
- Forward Voltage (VF): 1.8V to 2.4V
Rs 5.00LED 5mm Bulb Common Anode
Rs 5.00 -
LED Strip IP68
Quick Info :
- Voltage : 12V DC
- Thickness : 3mm
- Length: 64mm
- Power Consumption : Low Power
- Waterproof Rating : IP65 (Water-Resistant)
- Package only contains 1 strip
Rs 60.00LED Strip IP68
Rs 60.00 -
Logic Level Converter Bi-Directional Module 5V to 3.3V
Quick Info :
- 4 channels can convert up to 4 logic signals
- Can convert between 1.8V, 2.8V, 3.3V and 5V logic circuits
- Bi-directional so can work with bi-directional buses such as I2C
- Utilizes N-Ch MOSFET transistors for level translation
Rs 100.00Rs 150.00Logic Level Converter Bi-Directional Module 5V to 3.3V
Rs 100.00Rs 150.00 -
Logic Level Converter Bi-Directional Module 8 Channel
Quick Info :
- Type: Bi-Directional Level Shifter
- Channels: 8 Independent
- Voltage: 5V ↔ 3.3V
- Speed: Up to 400kHz
- Applications: I2C, SPI, UART, GPIO
Rs 320.00Rs 450.00Logic Level Converter Bi-Directional Module 8 Channel
Rs 320.00Rs 450.00 -
Matrix Keypad Plastic 3×4 12 Keys
Quick Info :
- Type: Hard plastic push button keypad
- Keys: 12 (0-9, *, #)
- Interface: 7 pins (4 rows + 3 columns)
- Pin Pitch: 2.54mm through-hole PCB
- Mounting: 4 corner mounting holes
- Housing: Black ABS plastic
- Compatible: Arduino, ESP32, Raspberry Pi
Rs 750.00Rs 850.00Matrix Keypad Plastic 3×4 12 Keys
Rs 750.00Rs 850.00 -
Matrix Keypad Plastic 4×4 16 Keys
Quick Info :
- Type: Hard plastic push button keypad
- Keys: 16 (0-9, *, #, A-D)
- Interface: 8 pins (4 rows + 4 columns)
- Pin Pitch: 2.54mm through-hole PCB
- Mounting: 4 corner mounting holes
- Housing: Black ABS plastic
- Compatible: Arduino, ESP32, Raspberry Pi
Rs 800.00Rs 900.00Matrix Keypad Plastic 4×4 16 Keys
Rs 800.00Rs 900.00 -
MAX485 RS485 to TTL Converter Module
Quick Info :
- IC Chipset : MAX485
- Operating Voltage : 5V DC
- Communication Standard : RS-485 (EIA-485)
- Max Nodes on Bus : 32 Transceivers
- Max Communication Distance : Up to 1200m
Rs 200.00Rs 220.00MAX485 RS485 to TTL Converter Module
Rs 200.00Rs 220.00 -
MAX98357 I2S 3W Amplifier Module
Quick Info :
- Operating voltage: 2.7 – 5.5 V
- The I2S audio input supports 3.3V and 5V levels
- 3.2W output at 10% THD,
- Speaker Spec : 4 Ω impedance of the speaker and 5 V power supply
Rs 520.00Rs 590.00MAX98357 I2S 3W Amplifier Module
Rs 520.00Rs 590.00
