Quick Info :
Input Voltage : AC 100 ~ 240V 50/60 HZ
Output Voltage: DC 24V
Output Current: 5A
Plug Type : UK Plug
Rs 2,200.00
Specifications :
Input Voltage : AC 100 ~ 240V 50/60 HZ
Output Voltage: DC 24V
Output Current: 3A
Plug Type : UK Plug
Rs 1,750.00
Quick Info :
Type : HLK-PM01
Input voltage (AC pins) : 90 – 264V AC (maximum)
Output voltage ( + Vo and -Vo pins) : 5V DC
Maxi. output current : 0.6A (continuous)
Rs 1,090.00
Quick Info :
Output Voltage: DC5V (±0.1V)
Output Current: 700mA
Power: 3.5W
Rs 350.00
Quick Info :
Input Voltage : AC 100 ~ 240V 50/60 HZ
Output Voltage: DC 5V
Output Current: 1A
Plug Type : UK Plug
Rs 500.00
Quick Info :
Input Voltage : AC 100 ~ 240V 50/60 HZ
Output Voltage: DC 12V
Output Current: 5A
Rs 1,450.00
Specifications :
Input Voltage : AC 100 ~ 240V 50/60 HZ
Output Voltage: DC 12V
Output Current: 4A
Rs 1,170.00
Quick Info :
Input Voltage : AC 100 ~ 240V 50/60 HZ
Output Voltage: DC 12V
Output Current: 3A
Plug Type : UK Plug
Rs 1,490.00
Quick Info :
Input Voltage : AC 100 ~ 240V 50/60 HZ
Output Voltage: DC 12V
Output Current: 1A
Plug Type : UK Plug
Rs 580.00
Quick Info :
Max. Operating Voltage: 45 V
Min. Operating Voltage: 8.2 V
Max. Current Per Phase: 2.5 A
Alternatives for DRV8825 : A4988 , TMC2209
Rs 590.00
Quick Info :
5-18V power supply supported.
Serial USB TTL compatible for 2.85V, 3.3V and 5v signal
GSM, GPRS, GPS {text messaging, data transmission, positioning} triple function.
Rs 4,000.00Rs 4,300.00
Quick Info :
Complies with wireless 802.11n standards
Frequency band: 2.4~2.4835GHz
Data rate up to 150Mbps
Rs 1,450.00
Quick Info :
Quad-band 850/900/1800/1900MHz – connect onto any global GSM network with any 2G SIM
Send and receive SMS messages.
Send and receive GPRS data (TCP/IP, HTTP, etc.).
Scan and receive FM radio broadcasts.
Minimum Power supply required : 5v 2A Power Supply
Rs 2,390.00
Quick Info:
Interface: USB 2.0
Support system : Windows 98/98SE/ME/2000/XP/Vista
Receiving and Sending rang: Up to 20 m
Rs 400.00Rs 500.00
Quick Info:
Bluetooth v2.0+EDR
2.4GHz ISM band frequency
Supported baud rate: 9600 (default), 19200,38400, 57600, 115200, 230400, 460800.
Speed: Asynchronous: 2.1Mbps(Max) / 160 kbps, Synchronous: 1Mbps/1Mbps
Power supply: 3.6V to 6V DC
Rs 1,090.00Rs 1,350.00
Quick Info :
ENC28J60 Ethernet chips, SOP28 package
SPI Interface
Single Supply: +3.3 V
Rs 990.00
Quick Info :
Material: ABS
Dimension(LxWxH): 43.7×30.5×5.3mm
Response Frequency: 13.56MHz
Chip type: FM1108 Fudan Chip
Rs 100.00
Quick Info :
Support Card Type: Read-only ID card (EM4100, IM4001)
Support frequency: 125KHz
Reader Time: <0.2s
Read Range: 3-10cm
Rs 990.00
Quick Info :
The working voltage: 5 ~ 12V
Output amplitude: 4.2V V-PP(5v input) to 11.4V V-PP(12V input).
Maximum output current: >=15mA (5V IN), >=35mA (12V IN)
Rs 290.00
Quick Info
Supply voltage (typically): 3.3V
Battery not included
Battery : CR2032
Rs 790.00
Quick Info :
Channels : 4
Input release voltage: 3.5 to 5V
Rated load voltage: 100V to 240V AC
Load current: 0.10 to 2A
Rs 1,600.00
Quick Info :
Channel : 1
Coil sensitivity = 5VDC
Maximum Contact capacity = 250VAC/10VDC
Maximum Current capacity = 10A
Rs 250.00Rs 390.00
Quick Info :
Channels : 1
Input release voltage: 3.5 to 5V
Rated load voltage: 100V to 240V AC
Load current: 0.10 to 2A
Rs 600.00
Quick Info :
Arduino and Raspberry Pi compatible
4-key membrane switch pad has 5 pin female header on end of flat cable
White sticker on back can be peeled off for adhesive mounting
Rs 285.00
Quick Info :
12-key membrane switch pad has 7 pin female header on end of flat cable
White sticker on back can be peeled off for adhesive mounting
Rs 250.00
