Quick Info :
OLED Driver IC: SSD1306
Resolution: 128 x 64
Visual Angle: >160°
Input Voltage: 3.3V ~ 6V
Compatible I/O Level: 3.3V, 5V
Rs 750.00Rs 990.00
Quick Info :
A single module can drive 8 by 8 common cathodes
Module Operating voltage: 5V.
Module size: 5 cm long X 3.2 cm wide X 1.5 cm high
Module with input and output interfaces, supports multiple modules cascade
Led colour:Red
Rs 800.00
Quick Info :
Operating Voltage: 5V
Backlight and Contrast is adjusted by potentiometer
Compatible for 16×2 , 16×4 and 20×4 LCD
Rs 250.00Rs 390.00
Quick Info :
Operating Voltage is 4.7V to 5.3V
Current consumption is 1mA without backlight
Alphanumeric LCD display module, meaning can display alphabets and numbers
Consists of two rows and each row can print 16 characters.
Compatible with LCD to I2C Adapter Board
Rs 460.00Rs 490.00
Quick Info :
Size: 48mm x 29mm x 26mm.
Display color: Red & Blue LED (dual display).
Display: 0.28″ LED digital.
Operating voltage: DC 4.5 ~ 30V.
Measure voltage: DC 0 ~ 100V.
Measure current: 10A (direct measurement, built-in shunt).
Rs 690.00
Quick Info :
USB Type : Micro USB
Header : 2.54mm
Material : Plastic
Size(L*W) : Approx. 26.06 x 22.93mm
Rs 100.00
Quick Info :
Connector Type: USB Type -B
PCB Size: 20 x 20 mm
Weight: 4g
Rs 100.00
Quick Info :
Built-in USB to TTL Transfer chip.
Designed to be used for USB to TTL electronic projects.
TTL interface output. easy to connect to your MCU.
Rs 490.00
Quick Info :
Chipset: MAX3232
Working Voltage: 3.3V-5.5V
Port: TX RX VCC GND
Rs 390.00
Quick Info :
Fully compliant USB 2.0 standard, backward compatible with USB1.1
Support System: Windows XP, Vista, Windows 7, Linux, MacOS, and WinCE5.0 drive
Supports Plug, Play and hot-swap ( USB side) ;
Rs 450.00
Quick Info :
Operation Voltage: 2.7V-5V
Operation Current: < 1.5mA
Sample rate: 10Hz
Simultaneous 50 and 60Hz supply rejection
Available Load Cells 5kg, 10kg or 20kg
Rs 290.00
Quick Info :
Standard USB type A male and TTL 5 pin connector.
5 pins for 3.3V, TXD, RXD, GND & 5V.
Baud rates: 300 bps to 1.5 Mbps
Rs 790.00
Quick Info :
Data transfer rates from 300 baud to 3 Mbaud (RS422, RS485, RS232) at TTL levels.
Integrated +3.3V level converter for USB I/O
Integrated level converter on UART and CBUS for interfacing to between +1.8V and +5V logic.
Rs 590.00
Quick Info :
Maximum output power: 3W*2(5V 4Ω)
Built with switch Potentiometer
Rs 320.00
Quick Info:
Supply Voltage: 5VDC
3W Output at 10% THD with a 4Ω Load and 5V Power Supply
Rs 190.00
Quick Info :
MT8870 Frequency decoder chip
Onboard 3.5mm input interface
5V Input
Designed to be compatible with standard 2.54mm sockets
Rs 490.00
Quick Info:
ATmega328P chip
14 digital I/O pins
6 analog input pins,
a USB connection,
A Power barrel jack,
ICSP header and a reset button.
crystal oscillator, serial communication, voltage regulator
Rs 2,190.00Rs 2,590.00
Quick Info :
Microcontroller: ATmega328
Board Power Supply: 3.35 -12 V (3.3V model) or 5 – 12 V (5V model)
Circuit Operating Voltage: 3.3V or 5V (depending on model)
Digital I/O Pins: 14
PWM Pins: 6
Rs 1,190.00Rs 1,590.00
Quick Info :
Realtek AMB82-Mini IoT AI Camera, Arduino Dev, 1080p Sensor, Multiple IO
Wi-Fi, Bluetooth, 1080p Sensor, H264/H265 Video, Multiple IO, Tensorflow-Lite AI
Equipped with Ultra-Low-Power AI Wi-Fi IP Camera SoC for rapid boot-up and low power consumption
Rs 19,500.00
Quick info :
WiFi controlled: Operated through a smartphone.
MPU6050 IMU for stability control.
All-in-one PCB: No need for additional 3D printed parts.
Easily upgradable: Can incorporate extra features like position hold or height hold using external modules.
Compact and lightweight.
Built-in battery charger.
Built-in USB interface for programming and debugging.
Rs 14,500.00
Quick Info :
Incremental Encoder
Supply Voltage: 3-5V
Left/Right rotary output pulse, each circle with 20 pulse
Built in 10k resistor
Cycles per revolution (CPR): 20
Rs 350.00
Quick Info :
Microcontroller: ATmega32u4
Operating Voltage: 5V
Digital I/O Pins: 20
PWM Channels: 7
Analog Input Channels: 12
Rs 2,990.00
Quick info :
The fuse holder works with any 2-30 amp blade fuse.
The structure of the fuse holder provides extra protection against water and dust.
Rs 190.00
Quick info :
Model : STM32F103C8T6
Core: ARM 32 Cortex-M3 CPU
72MHz work frequency.
64K flash memory, 20K SRAM.
2.0-3.6V power, I/O.
Rs 790.00
Quick info :
Operating voltage: DC12V;
Operating current: <20MA;
Operating frequency range: 20Hz ~ 400Hz;
Output mode: switch signal output;
Maximum detection wire diameter: 5.2mm;
Rs 950.00
Quick info :
Operating Voltage Range: 3V – 6V
Torque: 0.2 – 0.5 Nm
No-load Speed: 5000 – 15000 RPM
Stall Current: 1 – 3 A
Rs 290.00
Quick info :
Voltage: 12V DC
No Load Speed: 200 RPM
Stall Torque: Approximately 3.5 kg.cm
Gear Ratio: Typically around 1:30
Rs 2,950.00
Quick info:
Plug-and-Play: Easy setup with USB 2.0 interface
Compatibility: ISO 14443 Type A/B, ISO 15693, and NFC cards
Data Transfer speed: 106 kbps, 212 kbps, and 424 kbps
Power Supply: 5V DC
Rs 2,100.00
Quick info:
Supply voltage: 3 to 5.5V
Module current: 50mA
Module interface: Serial (SO, SCK, CS), 16-bit SPI compatible
Thermocouple temperature range: 0 to 450°C
Module sensor temperature range: 0 to 1024°C
Rs 790.00
Quick Info :
Individually control: 1 PCS LED pixel & 1 IC.
IC chip: WS2811 IC.
50pcs/string.
Rs 2,190.00
Quick Info :
Microphone With Bluetooth Transmitter.
Experience seamless audio with wireless technology, ensuring a stable signal for your karaoke sessions.
High Signal-to-Noise Ratio:Enjoy crystal-clear sound with a 70dB signal-to-noise ratio, perfect for professional karaoke performances.
Long Range Receiving Distance.
Rs 3,290.00
Quick info :
6.5MM Microphone function
Bluetooth version 5.0
Power supply voltage: 12V (range 7V-16V) and current not less than 2A.
SD Card function.
Music format: MP3/WMA/WAV/APE/FLAC lossless music format.
Radio FM frequency: 87.5—107.5mhz.
Rs 1,750.00
