-
NE555 Adjustable Pulse Frequency Duty Cycle Module Square Wave Signal Generator
Quick Info :
Main chip: NE555
Input Voltage (VCC): 5V-15VDC
Input current:~100MA
Output amplitude: 4.2V V-PP to 11.4V V-PP. (Varies with VCC voltage)Rs 280.00 -
NEO-6M GPS Module with Active Antenna
Quick Info :
- Operating temperature range: -40 TO 85°CUART TTL socket
- EEPROM to save configuration settings
- Rechargeable battery for Backup
- Supply voltage: 3.3 V
Rs 1,290.00Rs 1,800.00NEO-6M GPS Module with Active Antenna
Rs 1,290.00Rs 1,800.00 -
NRF24L01 2.4GHz Transceiver
QUICK OVERVIEW
- Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability,
- Built-in hardware CRC error detection, Multipoint communication address control.
- Low-power 1.9 ~ 3.6V, only 1uA on Power down mode
- Built-in 2.4Ghz antenna
- Built-in voltage regulator
Rs 490.00NRF24L01 2.4GHz Transceiver
Rs 490.00 -
NRF24L01 2.4GHz Transceiver Adapter Base
Quick Info :
- It can be used with NRF24L01 wireless module
- Add core nRF24L01+ Breakout Adapter with onboard 3.3V Regulator
- Onboard 3.3V voltage regulator accepts your Arduino +5V supply and provides 3.3V for the attached nRF24L01+ module
- Allows for easy connection to nRF24L01+ modules
- Small power on SMD LED indicator
Rs 250.00NRF24L01 2.4GHz Transceiver Adapter Base
Rs 250.00 -
NRF24L01 2.4GHz Transceiver With Antenna
Quick Info :
- Voltage: 3-3.6V (recommended 3.3V) V.
- Maximum output power: +20dBm.
- Power-down mode current: 4.2uA.
- Operating Range: 1Km
Rs 950.00NRF24L01 2.4GHz Transceiver With Antenna
Rs 950.00 -
OLED 128X64 0.96 inch Display Module
Quick Info :
- OLED Driver IC: SSD1306
- Resolution: 128 x 64
- Visual Angle: >160°
- Input Voltage: 3.3V ~ 6V
- Compatible I/O Level: 3.3V, 5V
Rs 750.00Rs 990.00OLED 128X64 0.96 inch Display Module
Rs 750.00Rs 990.00 -
PAM8403 3W Audio Amplifier
Quick Info:
- Supply Voltage: 5VDC
- 3W Output at 10% THD with a 4Ω Load and 5V Power Supply
Rs 130.00PAM8403 3W Audio Amplifier
Rs 130.00 -
PAM8403 Mini 5V Digital Amplifier Board
Quick Info :
- Maximum output power: 3W*2(5V 4Ω)
- Built with switch Potentiometer
Rs 320.00PAM8403 Mini 5V Digital Amplifier Board
Rs 320.00 -
PAM8610 15Wx2 Stereo Audio Amplifier Board
Quick Info :
- Main Chip: PAM8610
- Power Range: DC 6V-15V (self-protection)
- Recommended Voltage: DC 12V(2A)
- Output Power: 10Wx2(8Ω) 15Wx2(4Ω)
Rs 450.00 -
-
Plastic Wheel + Gear Motor
Quick Info :
- Name: TT motor
- Type: 1:48
- Speed: 45±10%r/min 90±10%r/min
- Rated voltage: 3V/6V
Rs 350.00Plastic Wheel + Gear Motor
Rs 350.00 -
Plastic Wheel for TT Gear Motor
Quick Info :
- Wheel diameter: 65mm
- Wheel thickness: 28mm
- Weight : 40g
Rs 100.00Rs 140.00Plastic Wheel for TT Gear Motor
Rs 100.00Rs 140.00 -
PWM DC 6V – 28V 3A Motor Speed Controller
Quick Info :
- Input supply voltage: 6V-28VDC
- The maximum output power: 80W
- The maximum continuous output current : 3A
Rs 450.00 -
Real Time Clock Module DS1307
Quick Info :
- Operating Voltage : 4.5V to 5.5V
- Current Consumption : < 500nA (with backup battery)
- Communication Interface : I2C (SCL, SDA)
- Time Format : 12-hour or 24-hour
- Backup Battery Support : CR2032 3V lithium battery
Rs 290.00Real Time Clock Module DS1307
Rs 290.00 -
RFID 13.56Mhz Card Empty
Quick Info :
- Credit Card Size, 13.56MHz, 1K Bytes Memory, ISO14443A, Read/Write protect by password, easy to program.
- Compatible with RC522 and PN532 readers.
- White card, card number not printed, No magnetic stripe, no holes. Each card individually packaged.
- Discounts applicable for more than 100 Card
Rs 95.00RFID 13.56Mhz Card Empty
Rs 95.00 -
RFM95 LoRa Module – 915MHz
Quick Info :
Module: RFM95/96
Frequency: 915MHzRs 2,450.00RFM95 LoRa Module – 915MHz
Rs 2,450.00 -
RGB LED 2812 Strip Non Waterproof Loose
Quick Info :
- LED Type : SMD2812
- Light Colors : RGB (Red, Green, Blue – Mixable for millions of colors)
- Length : 1 Meter
- Voltage : 12V / 24V DC
- Power Consumption : 7.2W – 14.4W per meter
- Luminous Flux : 500 – 1200 lm/m
Rs 850.00RGB LED 2812 Strip Non Waterproof Loose
Rs 850.00 -
RGB LED 5mm Common Anode
Quick Info :
- RGB Led Common Cathode
- Lens: 5mm Diameter / Diffused / Round
- R:620-625nm / G:515-520nm / B:450-455nm
Rs 15.00RGB LED 5mm Common Anode
Rs 15.00 -
-
RGB Pixel LED Controller Driver WS2811 WS2812 UCS1903
Quick Info :
- Support WS2811 WS2812B LED LED lights. It can’t control SK6812 RGBW and regular RGB LED lights without a driver IC. 300+ color modes include rainbow, wave, breathing, strobing, gradual change, color cycle, comet, static, fading, and chasing. Color-changing speed and brightness are adjustable.
Rs 850.00 -
Rs 350.00
RGB SMD LED 8 Channel Module 5050 WS2812
Rs 350.00 -
RS485 to TTL Converter Module
Quick Info :
- MAX485 chip-based for reliable RS485 communication
- Compatible with 3.3V and 5V power supplies
- Built-in 120-ohm termination resistor (jumper selectable)
- RX/TX LED indicators for signal monitoring
Rs 190.00RS485 to TTL Converter Module
Rs 190.00 -
SD Card Reader Module
Quick Info :
- All SD SPI pins output, MOSI, SCK, MISO, and CS.
- Support 5V/3.3V input.
- This module can handle 2GB SD cards.
Rs 350.00SD Card Reader Module
Rs 350.00 -
-
SIM800L GSM/GPRS Module
Quick Info :
- 2G Quad-band 850/900/1800/1900MHz
- Receive and make calls using the speaker and microphone outputs
- Receive and send SMS
- Listen to FM radio broadcasts
Rs 1,490.00SIM800L GSM/GPRS Module
Rs 1,490.00 -
SIM900 GSM GPRS Shield
Quick Info :
- Compatible with standard Arduino and Arduino Mega
- Selectable interface between hardware serial port and software serial port
- Support TCP/UDP protocols
Rs 4,100.00SIM900 GSM GPRS Shield
Rs 4,100.00 -
TCS34725 RGB Color Sensor Module
Quick info :
- Model: TCS3472
- Communication: I2C
- Dimensions: 20.44mm / 0.8″ x 20.28mm / 0.79″
Rs 1,100.00TCS34725 RGB Color Sensor Module
Rs 1,100.00 -
TDA2030 Audio Amplifier Module
Quick Info :
- 18 W mono amplifier circuit design
- On-board 10K potentiometer for volume adjustment
- Operating Voltage Range: 6 V to 12 V
Rs 290.00TDA2030 Audio Amplifier Module
Rs 290.00 -
TFT LCD Display Module 1.8″ SPI Interface 128×160
Quick Info :
- True TFT display with 262,144 vibrant colors
- 4-wire SPI interface – minimal pin usage
- Works with 3.3V and 5V systems
- Built-in microSD card slot for bitmap storage
- Compatible with Arduino, Raspberry Pi, ESP32
- Controllable LED backlight
- Compact 34.5×58.0mm PCB size
Rs 1,490.00 -
TP5000 Battery Charging Module
Quick info:
- Charges both Li-ion (4.2V) and LiFePO4 (3.6V) batteries
- Adjustable charging current: 0.5A to 2A (default 1A)
- Embedded switching regulator for efficient charging
- LED indicators: Red (charging), Green (complete)
- Multiple protection circuits: overcurrent, over-discharge, overvoltage
- Compact design with heat dissipation pad
- Easy voltage switching via F solder pad connection
Rs 390.00TP5000 Battery Charging Module
Rs 390.00 -
TP5100 Lithium Cell Charging Module
Quick Info :
- Model: TP5100
- Input Supply voltage (V): 5 ~ 18
- Programmable charge current: 0.1 ~ 2 A.
Rs 250.00TP5100 Lithium Cell Charging Module
Rs 250.00 -
TPA3110 XH-A232 30W + 30W Dual Channel Audio Power Amplifier
Quick Info :
- Operating voltage: 12V to 24V
- Output Power: 30W+30W
- Dual channel
- Chip name: TPA3110
Rs 590.00 -
TT Gear Motor
Quick Info :
- Name: TT motor
- Type: 1:48
- Speed: 45±10%r/min 90±10%r/min
- Rated voltage: 3V/6V
Rs 200.00TT Gear Motor
Rs 200.00 -
TTP223 Red Capacitive Touch Sensor Module
Quick info :
- Model: TTP223.
- Dimensions: 15mm x 11mm.
- Input Voltage: 2 Volt – 5.5 Volts DC.
Rs 60.00 -
ULN2003 Stepper Motor Driver Board Module
Quick Info :
- High Voltage Outputs: 50V
- Inputs Compatible with Popular Logic Types (5V TTL – Arduino Compatible)
- Relay Driver Applications
Rs 230.00Rs 390.00ULN2003 Stepper Motor Driver Board Module
Rs 230.00Rs 390.00