-
ESP8266 ESP-01 WIFI module
Quick Info :
- 802.11 b/g/n
- Operating Voltage: 3.3V
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
Rs 590.00ESP8266 ESP-01 WIFI module
Rs 590.00 -
FM Receiver Board V4M
Quick info:
- Wide Frequency Range – Supports 87.0 MHz to 108.0 MHz for clear FM reception.
- High Sensitivity – Low-noise RF input amplifier ensures strong signal reception.
- Excellent Audio Quality – 50 Hz to 18 kHz frequency response for crisp sound output.
- Compact & Lightweight – Ideal for integration into DIY electronics and audio projects.
- Easy to Integrate – Simple pin connections for quick setup in custom applications.
Rs 1,490.00FM Receiver Board V4M
Rs 1,490.00 -
FT232RL USB to TTL Converter
Quick Info :
- Data transfer rates from 300 baud to 3 Mbaud (RS422, RS485, RS232) at TTL levels.
- Integrated +3.3V level converter for USB I/O
- Integrated level converter on UART and CBUS for interfacing to between +1.8V and +5V logic.
Rs 590.00FT232RL USB to TTL Converter
Rs 590.00 -
GPS Adhesive Type Antenna SMA
Quick Info :
- Frequency – 1559MHz-1609Mhz
-
Active antenna noise figure <1.5dB
-
Polarization -RHCP or Linear
-
Cable length – Max. 3m
Rs 690.00GPS Adhesive Type Antenna SMA
Rs 690.00 -
GSM GPRS Adhesive Antenna
Quick Info :
- Low Freq. range – 820-960mHz
- High Freq. range – 1710-1990mHz
- Cable length – Max 3m
- Connector Type – SMA
Rs 890.00GSM GPRS Adhesive Antenna
Rs 890.00 -
HC-12 Long Range Wireless Communication Module
Quick Info :
- Working Voltage : 3.2V to 5.5V DC
- Working Current:
- Transmitting: 43 mA
- Receiving: 19 mA
- Sleep Mode: 1.8 mA
- Data Interface : UART/TTL (Serial)
- Working Temperature : -20°C to +70°C
Rs 1,390.00HC-12 Long Range Wireless Communication Module
Rs 1,390.00 -
HX711 Load Cell Amplifier
Quick Info :
- Operation Voltage: 2.7V-5V
- Operation Current: < 1.5mA
- Sample rate: 10Hz
- Simultaneous 50 and 60Hz supply rejection
- Available Load Cells 5kg, 10kg or 20kg
Rs 290.00HX711 Load Cell Amplifier
Rs 290.00 -
IRF520 MOSFET Driver Module
Quick Info :
- Voltage: 3.3V, 5V
- Output load voltage :0-24V
- Output load current: <5A (1A need to add more heat sink)
Rs 250.00IRF520 MOSFET Driver Module
Rs 250.00 -
-
Keypad Flexible 16 Keys
Quick Info :
- Arduino and Raspberry Pi compatible
- 16-key membrane switch pad has 8 pin female header on end of flat cable
- White sticker on back can be peeled off for adhesive mounting
Rs 290.00Keypad Flexible 16 Keys
Rs 290.00 -
L293D Motor Driver Module
Quick Info :
- Operating Voltage – 4.5 V to 36V.
- Compatible with Arduino Uno and Mega
- Compatible Motor and Wheel : DC Gear Motor With Plastic Wheel
Rs 590.00Rs 750.00L293D Motor Driver Module
Rs 590.00Rs 750.00 -
L298N Motor Driver Module
Quick Info
- Operating Voltage : 5 V to 35 V
- Great for 2 Gear motors
- Compatible Motor and Wheel : DC Gear Motor With Plastic Wheel
Rs 480.00Rs 590.00L298N Motor Driver Module
Rs 480.00Rs 590.00 -
LCD 16X2 Character Module
Quick Info :
- Operating Voltage is 4.7V to 5.3V
- Current consumption is 1mA without backlight
- Alphanumeric LCD display module, meaning can display alphabets and numbers
- Consists of two rows and each row can print 16 characters.
- Compatible with LCD to I2C Adapter Board
Rs 460.00 – Rs 490.00LCD 16X2 Character Module
Rs 460.00 – Rs 490.00 -
LCD 16X4 Character Module
Quick Info :
- Operating Voltage is 4.7V to 5.3V
- Current consumption is 1mA without backlight
- Alphanumeric LCD display module, meaning can display alphabets and numbers
- Consists of four rows and each row can print 16 characters.
- Compatible with LCD to I2C Adapter Board
Rs 1,390.00LCD 16X4 Character Module
Rs 1,390.00 -
-
LED 5mm Bulb Common Anode
Specification:
- 5mm Round Standard Directivity
- Color : Red, Blue, Green, White, Yellow
- UV Resistant : Eproxy
- Forward Current (IF): 30mA
- Forward Voltage (VF): 1.8V to 2.4V
Rs 4.00LED 5mm Bulb Common Anode
Rs 4.00 -
LED Strip 64mm
Quick Info :
- Voltage : 12V DC
- Thickness : 3mm
- Length: 64mm
- Power Consumption : Low Power
- Waterproof Rating : IP65 (Water-Resistant)
- Package only contains 1 strip
Rs 60.00 -
LED Strip White 5050
Quick Info :
- LED Type : SMD 5050
- Color : White
- Length : 5m
- Voltage : 12V
- Beam Angle : 120°
- Waterproof Rating : IP20 (Indoor)
- Installation : Self-adhesive backing or clips for mounting
Rs 285.00LED Strip White 5050
Rs 285.00 -
Logic Level Converter Bi-Directional Module 5V to 3.3V
Quick Info :
- 4 channels can convert up to 4 logic signals
- Can convert between 1.8V, 2.8V, 3.3V and 5V logic circuits
- Bi-directional so can work with bi-directional buses such as I2C
- Utilizes N-Ch MOSFET transistors for level translation
Rs 100.00 -
MAX7219 8 X 8 LED Dot Matrix Module
Quick Info :
- A single module can drive 8 by 8 common cathodes
- Module Operating voltage: 5V.
- Module size: 5 cm long X 3.2 cm wide X 1.5 cm high
- Module with input and output interfaces, supports multiple modules cascade
- Led colour:Red
Rs 800.00MAX7219 8 X 8 LED Dot Matrix Module
Rs 800.00 -
MAX98357 I2S 3W Amplifier Module
Quick Info :
- Operating voltage: 2.7 – 5.5 V
- The I2S audio input supports 3.3V and 5V levels
- 3.2W output at 10% THD,
- Speaker Spec : 4 Ω impedance of the speaker and 5 V power supply
Rs 790.00MAX98357 I2S 3W Amplifier Module
Rs 790.00 -
MCP2515 CAN Module
Quick Info :
- Working Voltage: 5V
- Working Current: 5mA
- Interface: SPI
Rs 1,250.00MCP2515 CAN Module
Rs 1,250.00 -
MFRC522 RFID Reader Module
Quick Info :
- MFRC522 chip based board
- Operating frequency: 13.56MHz
- Supply Voltage: 3.3V
- Current: 13-26mA
Rs 590.00MFRC522 RFID Reader Module
Rs 590.00 -
Micro SD card reader module
Quick Info:
- Control Interface: GND, VCC, MISO, MOSI, SCK, CS
- Size: 45 x 28mm
- Net weight: 6g
Rs 350.00Micro SD card reader module
Rs 350.00 -
Micro USB to DIP Converter Module
Quick Info :
- USB Type : Micro USB
- Header : 2.54mm
- Material : Plastic
- Size(L*W) : Approx. 26.06 x 22.93mm
Rs 100.00Micro USB to DIP Converter Module
Rs 100.00 -
Mini DC 3A Motor PWM Speed Controller
Quick Info :
- Operating Voltage: DC 4.5V-35V
- Control Power: 90W (maximum)
- Size: 30mm x 26mm x 14mm (Without Handle)
Rs 290.00Mini DC 3A Motor PWM Speed Controller
Rs 290.00 -
-
MT8870 DTMF Voice Module
Quick Info :
- MT8870 Frequency decoder chip
- Onboard 3.5mm input interface
- 5V Input
- Designed to be compatible with standard 2.54mm sockets
Rs 490.00MT8870 DTMF Voice Module
Rs 490.00 -
N20 Rubber Wheel
Quick Info :
- Dimensions: 43x19x3mm
- Material: Rubber and Plastic
Rs 200.00N20 Rubber Wheel
Rs 200.00 -
NE5532 Tone Control Preamplifier Module
Quick Info :
Model: NE5532
Supply Voltage:Dual Power AC 12V – 18V
Number of Channel: Dual-channel Audio
Adjustment Types: 4 channels(treble+alto+bass+volume)Rs 1,590.00NE5532 Tone Control Preamplifier Module
Rs 1,590.00 -
NE555 Adjustable Pulse Frequency Duty Cycle Module Square Wave Signal Generator
Quick Info :
Main chip: NE555
Input Voltage (VCC): 5V-15VDC
Input current:~100MA
Output amplitude: 4.2V V-PP to 11.4V V-PP. (Varies with VCC voltage)Rs 280.00 -
NEO-6M GPS Module with Active Antenna
Quick Info :
- Operating temperature range: -40 TO 85°CUART TTL socket
- EEPROM to save configuration settings
- Rechargeable battery for Backup
- Supply voltage: 3.3 V
Rs 1,290.00Rs 1,800.00NEO-6M GPS Module with Active Antenna
Rs 1,290.00Rs 1,800.00 -
NRF24L01 2.4GHz Transceiver
QUICK OVERVIEW
- Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability,
- Built-in hardware CRC error detection, Multipoint communication address control.
- Low-power 1.9 ~ 3.6V, only 1uA on Power down mode
- Built-in 2.4Ghz antenna
- Built-in voltage regulator
Rs 490.00NRF24L01 2.4GHz Transceiver
Rs 490.00 -
NRF24L01 2.4GHz Transceiver Adapter Base
Quick Info :
- It can be used with NRF24L01 wireless module
- Add core nRF24L01+ Breakout Adapter with onboard 3.3V Regulator
- Onboard 3.3V voltage regulator accepts your Arduino +5V supply and provides 3.3V for the attached nRF24L01+ module
- Allows for easy connection to nRF24L01+ modules
- Small power on SMD LED indicator
Rs 250.00NRF24L01 2.4GHz Transceiver Adapter Base
Rs 250.00