Skip to content
Quick info :
Material: Plastic
Colour: Black
No. of Drawers: 33
Rs 4,950.00Rs 5,100.00
Quick Info:
Type of IGBT Channel: N-Channel
Maximum Power Dissipation (Pc), W: 310
Maximum Collector-Emitter Voltage |Vce|, V: 1200
Collector-Emitter saturation Voltage |Vcesat|, V: 1.48
Maximum Collector Current |Ic|, A: 40
Rs 390.00
Quick Info :
Sensing distance: 5mm
Operating voltage: DC 10-30V
Screw hole : 3.2mm, Pitch : 10.5mm
Wire length : 100cm (39-inch)
Rs 690.00
Quick Info :
Sensing distance : 5mm
Operating voltage : 10 – 30 VDC
Response frequency : 800Hz
Output method : PNP, 150mA load
Rs 690.00
Quick Info:
Operating Voltage : 3.3V – 5V DC
Carrier Frequency : 38kHz
Remote Buttons : 21
Effective Range : Up to 8 metres
Reception Angle : ~45°
Output Type : Digital
Compatibility : Arduino, Raspberry Pi, ESP32
Rs 290.00Rs 350.00
Quick Info :
Type: IR Flame Sensor
Voltage: 3.3V-5V
Outputs: Digital & Analog
Features: Adjustable Sensitivity
Application: Fire Detection
Rs 180.00Rs 190.00
Quick Info :
Wavelength : 940nm
Forward Voltage : 1.2V – 1.6V
Color : White
Forward Current : 20mA (typical), max 50mA
Power Dissipation : ≤100mW
Rs 20.00
Quick Info :
No. of Channels : 2 Channels
Driver Configuration : Half Bridge
Power Switch Type : MOSFET
No. of Pins : 8 Pins
Rs 230.00
Quick Info :
Supply Voltage : 10V – 15.6V
High-Side Floating Supply Voltage : 10V – 15.6V
Maximum Voltage Rating : 600V
Operating Frequency : Adjustable
Dead-Time Control : Adjustable via external components
Rs 200.00
Quick Info :
Type of Control Channel: N -Channel
Maximum Power Dissipation (Pd): 150 W
Maximum Drain-Source Voltage |Vds|: 200 V
Maximum Drain Current |Id|: 30 A
Rs 390.00
Quick Info :
Type of Control Channel: N -Channel
Maximum Power Dissipation (Pd): 280 W
Maximum Drain-Source Voltage |Vds|: 250 V
Maximum Gate-Source Voltage |Vgs|: 20 V
Maximum Gate-Threshold Voltage |Vgs(th)|: 4 V
Maximum Drain Current |Id|: 38 A
Rs 450.00
Quick Info :
Drain Source Voltage (Vdss) : 55V
Continuous Drain Current (Id) : 49A
Power Dissipation (Pd) : 94W
Rs 390.00
Quick Info:
Model : JF-1264B
Operating Voltage : 12V DC
Operating Current : 5A
Force : 55N (≈ 5.6kg)
Stroke Distance : 10mm
Action Type : Push / Pull
Duty Cycle : Intermittent
Rs 4,350.00Rs 4,500.00
Quick Info :
Connector Type : JST PH
Pitch: 2.0mm ± 0.05
Number of Pins: 2
Wire Type: 26AWG
Length: 15 cm
Rs 80.00
Quick Info :
Connector : Male to Female
1 Cable : Rs. 6
1 Set (40pcs) : Rs. 240
Rs 6.00
Quick Info :
Connector : Male to Male
1 Cable : Rs. 6
1 Set (40pcs) : Rs. 240
Rs 6.00
Quick Info:
Brand : JYOCUN
Connector Type : RJ45 (8P8C)
Cable Compatibility : Cat5 / Cat5e / Cat6 / Cat6a
Functions : Crimp / Cut / Strip
Mechanism : Ratchet with Auto-release
Die Material : Hardened Steel
Tool Length : Approximately 210mm
Rs 1,950.00Rs 2,250.00
Quick Info :
Material: KT Foam Board
Dimensions: 48×24 inches
Thickness: 5mm
Color: White
Application: Crafts, RC projects
Rs 890.00Rs 950.00
Quick Info :
Model: KW-401
Maximum Power: 130 Watts (MAX)
Nominal Power: 65 Watts (RMS)
Impedance: 40HM
Frequency Response: 100 Hz – 18,000 Hz
Material: Metal frame with paper cone
Rs 690.00
Quick Info:
Voltage Range : 170–270V AC
Current Range : 0–63A
Power Range : 0–17KW
Energy Range : 0–9999kWh
Measured Parameters : Voltage, Current, Power, kWh, Frequency, Power Factor, Temperature, Timing
Display : Multi-colour screen
Wireless : Wi-Fi 2.4GHz (Tuya Smart / Smart Life)
Protection : Over/under voltage, over-current, over-power, over-temp, timed cut-off
Installation : 35mm DIN rail snap-on
Dimensions : 66 × 66 × 82mm
Rs 8,900.00Rs 9,500.00
Quick Info:
LED Type : 5mm Common Cathode RGB
Operating Voltage : 3.3V – 5V
Current per Channel : 20mA
Interface Pins : 4 (R, G, B, GND)
Compatibility : Arduino, ESP32, Raspberry Pi
PCB Size : 18.5mm × 15mm
Rs 150.00Rs 200.00
Quick Info :
Chip type: VS1838B
Operating Voltage: 3.3V to 5V
Current Consumption: 1.5mA peak
Receiving angle: 90 °
Reception distance: 17m
Rs 220.00
Quick Info :
Motor Compatibility: 25mm DC geared motors
Material: Steel L-bracket
Coupler: Hex type, 6mm bore
Mounting: Pre-drilled holes
Rs 450.00Rs 600.00
Quick Info :
Motor Compatibility: 37mm DC geared motors
Material: Steel L-bracket
Coupler: Hex type, 6mm bore
Mounting: Pre-drilled holes
Rs 450.00Rs 600.00
Quick Info :
No. of Outputs : 4 Outputs
Output Current : 2A
Output Voltage : 46V
Supply Voltage Min : 4.5V
Supply Voltage Max : 7V
Rs 350.00
Quick Info:
Operating Voltage : 2.5V – 12V DC
Output Current : 800mA continuous / 1.5A peak
Channels : 4
Supported Motors : DC Motors
Number of ICs : 4 × L9110S
PWM Frequency : Up to 8KHz
Rs 420.00Rs 450.00
Quick Info :
Built-in 2 channels (dual) enabling use in stereo and bridge amplifier applications
Dual : 6W×2 (typ.)
Bridge : 19W (typ.)
Supply Voltage : 18v
Allowable power dissipation : 15W
Rs 390.00
Quick Info :
Type : Audio Power Amplifier IC
Output Power : 25W per channel
Operating Voltage : 14V to 28V
Channels : Stereo (Two channels)
Impedance Compatibility : 4Ω to 8Ω speaker load
Rs 450.00
Quick Info :
Range: 30 mm – 4 m
Interface: I2C
Voltage: 2.6 V – 5.5 V
Accuracy: ±25 mm
Field of View (FoV): Up to 27°
Rs 1,750.00Rs 1,950.00
Quick Info :
Operating Voltage is 4.7V to 5.3V
Current consumption is 1mA without backlight
Alphanumeric LCD display module, meaning can display alphabets and numbers
Consists of four rows and each row can print 16 characters.
Compatible with LCD to I2C Adapter Board
Rs 1,390.00
Quick Info :
Display Format : 20 columns x 4 rows
Interface : I2C (SDA, SCL)
Default I2C Address : 0x27
Operating Voltage : 5V DC
Backlight : Blue with white text
Rs 1,490.00
Quick Info :
Display Type : 16×2 Character LCD
Keypad Buttons : Up, Down, Left, Right, Select
Interface : 4-Bit Parallel + A0 Analog
Board Form Factor : Arduino Uno Shield
Rs 595.00
