Best Seller Items
-
360 Degree Rotary Encoder Module
Quick Info :
- Incremental Encoder
- Supply Voltage: 3-5V
- Left/Right rotary output pulse, each circle with 20 pulse
- Built in 10k resistor
- Cycles per revolution (CPR): 20
Rs 350.00360 Degree Rotary Encoder Module
Rs 350.00 -
1K – 100K Potentiometer
Quick Info :
- 1K, 5K, 10K, 50K, 100K Ohm
- Linear taper, carbon film type
- Single-Turn
Rs 30.00 – Rs 100.001K – 100K Potentiometer
Rs 30.00 – Rs 100.00 -
ESP8266 ESP-01 WIFI module
Quick Info :
- 802.11 b/g/n
- Operating Voltage: 3.3V
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
Rs 590.00ESP8266 ESP-01 WIFI module
Rs 590.00 -
NodeMCU Wi-Fi Development Board
Quick Info :
- Microcontroller: ESP8266
- Operating Voltage: 3.3V
- Input Voltage: 7-12V
- Digital I/O Pins (DIO): 16
- Analog Input Pins (ADC): 1
Rs 1,150.00Rs 1,450.00NodeMCU Wi-Fi Development Board
Rs 1,150.00Rs 1,450.00 -
4 Ohm 5W Speaker
Quick Info :
- Impedance : 4 Ohms
- Power : 5 Watts
- Type : Round Full-range Speaker
- Diameter : 40 mm
Rs 450.00Rs 600.004 Ohm 5W Speaker
Rs 450.00Rs 600.00 -
7x7x12mm ON-OFF Self Lock Push Button
Quick Info :
- Type : Self-Lock Push Button
- Operation : ON/OFF
- Pins : 6 (DPDT)
- Rated Voltage : 12 V DC
- Rated Current : 0.5 A
Rs 25.00Rs 55.007x7x12mm ON-OFF Self Lock Push Button
Rs 25.00Rs 55.00
-
-
IIAKKA Micro Cutting Plier
Quick info :
- Size: 4.5” – 6” inches (115mm – 150mm) – Compact for precision work
- Cutting Capacity: 18-24 AWG (0.5mm – 1.2mm) for soft wires
- Blade Type: Flush Cut / Semi-Flush Cut for smooth, clean cuts
- Blade Material: Hardened High-Carbon Steel / Stainless Steel for durability
- Blade Hardness: HRC 54-62 (Rockwell Hardness) – Ensures long-lasting sharpness
- Coating: Anti-rust nickel plating or oxidation-resistant finish for longevity
- Jaw Opening: 8mm – 12mm – Access tight spaces easily
Rs 490.00IIAKKA Micro Cutting Plier
Rs 490.00 -
Inductive Proximity Sensor PNP PL-05P
Quick Info :
- Sensing distance : 5mm
- Operating voltage : 10 – 30 VDC
- Response frequency : 800Hz
- Output method : PNP, 150mA load
Rs 690.00Inductive Proximity Sensor PNP PL-05P
Rs 690.00 -
-
IR Flame Sensor Module 4 Pin
Quick Info :
- Type: IR Flame Sensor
- Voltage: 3.3V-5V
- Outputs: Digital & Analog
- Features: Adjustable Sensitivity
- Application: Fire Detection
Rs 180.00Rs 190.00IR Flame Sensor Module 4 Pin
Rs 180.00Rs 190.00 -
IRFP264 N Channel MOSFET
Quick Info :
- Type of Control Channel: N -Channel
- Maximum Power Dissipation (Pd): 280 W
- Maximum Drain-Source Voltage |Vds|: 250 V
- Maximum Gate-Source Voltage |Vgs|: 20 V
- Maximum Gate-Threshold Voltage |Vgs(th)|: 4 V
- Maximum Drain Current |Id|: 38 A
Rs 450.00IRFP264 N Channel MOSFET
Rs 450.00 -
IRFZ44NPBF N Channel MOSFET Original
Quick Info :
- Drain Source Voltage (Vdss) : 55V
- Continuous Drain Current (Id) : 49A
- Power Dissipation (Pd) : 94W
Rs 390.00IRFZ44NPBF N Channel MOSFET Original
Rs 390.00 -
Keypad Flexible 12 Keys
Quick Info :
- 12-key membrane switch pad has 7 pin female header on end of flat cable
- White sticker on back can be peeled off for adhesive mounting
Rs 250.00Keypad Flexible 12 Keys
Rs 250.00 -
LCD 16X2 Character Module
Quick Info :
- Operating Voltage is 4.7V to 5.3V
- Current consumption is 1mA without backlight
- Alphanumeric LCD display module, meaning can display alphabets and numbers
- Consists of two rows and each row can print 16 characters.
- Compatible with LCD to I2C Adapter Board
Rs 460.00 – Rs 490.00 -
LCD 16X2 Keypad Shield
Quick Info :
- Operating Voltage: 5V
- 5 Push buttons.
- Left, Right, Up, Down and Select buttons
- Screen contrast adjustment
- Arduino Reset button
Rs 595.00LCD 16X2 Keypad Shield
Rs 595.00 -
LCD 16X4 Character Module
Quick Info :
- Operating Voltage is 4.7V to 5.3V
- Current consumption is 1mA without backlight
- Alphanumeric LCD display module, meaning can display alphabets and numbers
- Consists of four rows and each row can print 16 characters.
- Compatible with LCD to I2C Adapter Board
Rs 1,390.00LCD 16X4 Character Module
Rs 1,390.00 -
LCD 20×4 Character Module with I2C Adapter
Quick Info :
- Interface : I2C
- I2C Address : 0x3F
- Supply voltage : 5V
- Contrast Adjust : Through Potentiometer
- Backlight : Blue
Rs 1,490.00LCD 20×4 Character Module with I2C Adapter
Rs 1,490.00 -
LDR Light Sensitive Module with Relay
Quick Info :
- Operating Voltage: 12V DC
- Module Dimensions: 5cm x 2.7cm x 2cm
- Sensor: Photosensitive resistance module
Rs 650.00LDR Light Sensitive Module with Relay
Rs 650.00 -
-
-
LiPo Battery 3.7V 1200mAH
Quick Info :
- Battery Type : Lithium Polymer (LiPo)
- Voltage : 3.7V nominal
- Capacity : 1200mAh
- Size : 60mm X 25mm
- Charging Voltage : 4.2V (fully charged)
- Discharge Rate : 1C to 25C
Rs 1,990.00LiPo Battery 3.7V 1200mAH
Rs 1,990.00 -
LiPo Battery 3.7V 150mAh 402030
Quick Info :
- Type: LiPo Battery
- Voltage: 3.7V
- Capacity: 150mAh
- Dimensions: 30mm x 20mm x 4mm
- Applications: Wearables, Small Electronics
Rs 300.00Rs 350.00LiPo Battery 3.7V 150mAh 402030
Rs 300.00Rs 350.00 -
LiPo Battery 3.7V 250mAh
Quick Info :
- Battery Type : Lithium Polymer (LiPo)
- Nominal Voltage : 3.7V DC
- Capacity : 250mAh
- Charging Voltage : 4.2V ± 0.05V
- Discharge Cutoff Voltage : ~3.0V
- Continuous Discharge Rate : ~1C – 2C
- Max Discharge Current : ~250mA – 500mA
Rs 690.00LiPo Battery 3.7V 250mAh
Rs 690.00 -
LiPo Battery 3.7V 500mA
Quick Info :
- Battery Type : Lithium Polymer (LiPo)
- Nominal Voltage : 3.7V DC
- Capacity : 500mAh
- Dimensions : ~25mm x 45mm x 7mm
- Charging Voltage : 4.2V ± 0.05V
- Discharge Cutoff Voltage : ~3.0V
Rs 890.00LiPo Battery 3.7V 500mA
Rs 890.00 -
LiPo Battery 3.7V 55mAh 401120
Quick Info :
- Type: Micro LiPo Battery
- Voltage: 3.7V
- Capacity: 55mAh
- Dimensions: 20mm x 11mm x 4mm
- Applications: Small Electronics & Wearables
Rs 200.00Rs 250.00LiPo Battery 3.7V 55mAh 401120
Rs 200.00Rs 250.00 -
-
-
-
LM 2596 DC to DC Step down (Buck) Adjustable Module with LED Display
Quick Info :
- Wide input voltage 5V ~ 40V
- Wide Output voltage 1.2V ~ 37V
- Max Output current 3A
Rs 1,190.00 -
LM2596 CC/CV Li-Ion Charger/LED Power Supply Module
Quick Info :
- Input Voltage: 5-35V
- Input Voltage Must Be At Least 2V Above Output Voltage
- Output Voltage: 1.25-30V (infinitely adjustable)
- Constant Current Range: 0-3A (infinitely adjustable)
Rs 690.00 -
Magnet Block 30x10x2mm
Quick Info :
- Length: 30mm
- Width: 10mm
- Height: 2mm
Rs 100.00Magnet Block 30x10x2mm
Rs 100.00 -
Magnet Block 30x20x5mm
Quick Info :
- Length: 30mm
- Width: 20mm
- Height: 5mm
Rs 300.00Magnet Block 30x20x5mm
Rs 300.00 -
Magnifier With Auxiliary Clip TE800
Quick Info :
- Model : T-800
- Lens Diameter: Typically 2.5 inches
- Material: Optical-grade glass lens with a metal and ABS plastic frame
- Clips: Two adjustable alligator clips for holding components
- Lighting: Optional LED lights powered by AA batteries
- Flexibility: Fully adjustable joints for multiple angles and positions
Rs 2,790.00Magnifier With Auxiliary Clip TE800
Rs 2,790.00 -
MAX7219 8 Way Display Module
Quick Info :
- Eight 7-Segment LED Displays with 0.36″ high red digits
- LED displays mounted in sockets
- Built-in MAX7219 LED Driver
- SPI 3-wire serial interface for easy hookup to MCU
- Can daisy-chain multiple modules together for larger displays
Rs 590.00MAX7219 8 Way Display Module
Rs 590.00 -
MAX7219 8 X 8 LED Dot Matrix Module
Quick Info :
- A single module can drive 8 by 8 common cathodes
- Module Operating voltage: 5V.
- Module size: 5 cm long X 3.2 cm wide X 1.5 cm high
- Module with input and output interfaces, supports multiple modules cascade
- Led colour:Red
Rs 800.00MAX7219 8 X 8 LED Dot Matrix Module
Rs 800.00 -
MAX7219 8 X 8 LED Dot Matrix Module V2
Quick Info :
- Single 8×8 LED Matrix Display with 1.3″ high bright red display
- Built-in MAX7219 LED Driver
- SPI 3-wire serial interface for easy hookup to MCU
Please note that the Jumper Cables need to be purchased separately
Rs 900.00MAX7219 8 X 8 LED Dot Matrix Module V2
Rs 900.00 -
MAX7219 8-Digit LED Display Drivers
Quick Info :
- No. of Digits : 8
- No. of Segments : 7
- Supply Voltage Min : 4V
- Supply Voltage Max : 5.5V
Rs 495.00MAX7219 8-Digit LED Display Drivers
Rs 495.00 -
MAX98357 I2S 3W Amplifier Module
Quick Info :
- Operating voltage: 2.7 – 5.5 V
- The I2S audio input supports 3.3V and 5V levels
- 3.2W output at 10% THD,
- Speaker Spec : 4 Ω impedance of the speaker and 5 V power supply
Rs 790.00MAX98357 I2S 3W Amplifier Module
Rs 790.00 -
-
MIC XLR Jack Male Metal
Quick Info :
- Microphone XLR Jack 3 Pin
Rs 290.00MIC XLR Jack Male Metal
Rs 290.00
