Quick Info :
1K, 5K, 10K, 50K, 100K Ohm
Linear taper, carbon film type
Single-Turn
Rs 30.00Rs 100.00
Quick Info :
802.11 b/g/n
Operating Voltage: 3.3V
Wi-Fi Direct (P2P), soft-AP
Integrated TCP/IP protocol stack
Rs 590.00
Quick Info :
Microcontroller: ESP8266
Operating Voltage: 3.3V
Input Voltage: 7-12V
Digital I/O Pins (DIO): 16
Analog Input Pins (ADC): 1
Rs 1,150.00Rs 1,450.00
Quick info:
3000-count display for precise measurements
AC current measurement up to 600A
AC/DC voltage measurement up to 600V
Resistance testing up to 3MΩ range
Capacitance measurement up to 1mF
Auto-identify diode and continuity testing
LIVE wire detection for enhanced safety
Rs 6,890.00Rs 7,200.00
Quick info:
Charges both Li-ion (4.2V) and LiFePO4 (3.6V) batteries
Adjustable charging current: 0.5A to 2A (default 1A)
Embedded switching regulator for efficient charging
LED indicators: Red (charging), Green (complete)
Multiple protection circuits: overcurrent, over-discharge, overvoltage
Compact design with heat dissipation pad
Easy voltage switching via F solder pad connection
Rs 390.00
Quick info:
N16R8: 16 MB Flash and 8 MB PSRAM.
Dual-Core Xtensa® LX7 Processor – Runs at up to 240 MHz for high-performance computing.
Wi-Fi 4 & Bluetooth 5 (LE) – Supports 2.4 GHz Wi-Fi and Bluetooth Low Energy (BLE) for wireless connectivity.
Dual USB-C Ports:
One for power and USB-to-UART bridge communication for easy programming.
One for native USB functionality, supporting USB OTG, device emulation, or USB mass storage applications.
Rs 2,290.00Rs 2,490.00
Quick Info :
Measures AC voltage up to 250V
Built-in ZMPT101B voltage transformer (1000:1000 ratio)
High galvanic isolation up to 4000V for safety
Wide supply voltage: 5V to 30V DC
Compatible with Arduino, ESP8266, Raspberry Pi
Adjustable analog output for versatile applications
Rs 540.00
Quick Info :
FT232RL+75176 chipset for stable communication
Automatic data flow control – no manual DE/RE control
Supports up to 32 devices on RS485 bus network
Wide baud rate: 300-921600bps with auto-detection
Switchable RS485/TTL modes via 4 jumpers
TVS protection and USB self-recovery features
Self-powered from USB – no external power needed
Rs 950.00
Quick Info :
MAX485 chip-based for reliable RS485 communication
Compatible with 3.3V and 5V power supplies
Built-in 120-ohm termination resistor (jumper selectable)
RX/TX LED indicators for signal monitoring
Rs 190.00
Quick Info :
4 degrees of freedom for flexible arm movement
Compatible with Arduino UNO, MEGA, and Raspberry Pi
Uses 4x SG90 servo motors (may require separate purchase)
Lightweight acrylic/wooden construction for easy assembly
Includes functional claw gripper for object manipulation
Multiple control options: joystick, PC software, custom code
Perfect educational tool for STEM learning and robotics
Rs 2,890.00
Quick Info :
4mm detection distance with ±10% accuracy
Adjustable sensitivity range: 0-3.8mm
Detects magnetic and non-magnetic metals
Built-in LED indication for switched state
IP67 waterproof protection rating
3-wire connection: VCC, GND, NPN NO output
Rs 690.00
Quick Info :
Controls 2 DC motors or 1 stepper motor simultaneously
Wide voltage range: 4.5V to 25V input supply
600mA continuous, 1.2A peak current per channel
Built-in overtemperature and overcurrent protection
PWM speed control and bidirectional rotation
Direct compatibility with Arduino UNO/MEGA 2560
Compact size: 40 x 35.5 x 12.5mm, weighs only 10g
Rs 400.00
Quick Info :
Optocoupler isolation protects control circuits
Wide input range: 3-20V PWM signals
High output capacity: DC 3.7-27V, up to 10A
PWM frequency control: 0-20KHz for speed/brightness adjustment
Compatible with motors, LED strips, pumps, solenoid valves
Compact lightweight design at only 15g
Perfect for Arduino and microcontroller projects
Rs 490.00
Quick Info :
True TFT display with 262,144 vibrant colors
4-wire SPI interface – minimal pin usage
Works with 3.3V and 5V systems
Built-in microSD card slot for bitmap storage
Compatible with Arduino, Raspberry Pi, ESP32
Controllable LED backlight
Compact 34.5×58.0mm PCB size
Rs 1,490.00
Quick Info :
Transistor Type: NPN
Collector-Emitter Voltage (Vce): 80V
Collector-Base Voltage (Vcb): 80V
Emitter-Base Voltage (Veb): 5V
Collector Current (Ic): 15A (maximum)
Power Dissipation (Pd): 100W
Rs 220.00
Quick Info :
Operating Voltage: 3V to 12V
Output Frequency: Variable (based on input)
Output Waveform: Square wave
Output Drive Current: 50mA (max)
Operating Temperature Range: -20°C to +70°C
Rs 590.00
Quick Info :
Operating Voltage Range: 8V to 25V
Oscillator Frequency: 100 kHz
Output Drive Current: 200mA
Max. Duty Cycle: 100%
Start-up Current: 50μA
Rs 45.00
Quick Info :
Operating Voltage Range: 8V to 30V
Oscillator Frequency: 100 kHz
Output Voltage: 5V reference (±2%)
Output Drive Current: 200mA
Max. Duty Cycle: 100%
Rs 45.00
Quick Info :
Transistor Type: NPN
Collector-Emitter Voltage (Vce): 60V
Collector-Base Voltage (Vcb): 80V
Emitter-Base Voltage (Veb): 5V
Collector Current (Ic): 15A (maximum)
Power Dissipation (Pd): 115W
Rs 340.00
Quick Info :
Supply Voltage: 3V to 18V
Maximum Clock Frequency: 5 MHz (typical at Vcc = 5V)
Output Type: BCD (Binary Coded Decimal)
Ripple Blanking: Yes (to eliminate ripple from the outputs)
Counter Type: Decade (0-9)
Maximum Power Consumption: 10mW
Rs 85.00
Quick Info :
Transistor Type: NPN
Collector-Emitter Voltage (Vce): 80V
Collector-Base Voltage (Vcb): 80V
Emitter-Base Voltage (Veb): 5V
Collector Current (Ic): 15A (maximum)
Power Dissipation (Pd): 100W
Rs 70.00
Quick Info :
Operating Voltage: 8V to 35V
Output Voltage: 5V reference (±1% precision)
Oscillator Frequency: 100Hz to 400kHz
Output Current: 200mA (typical)
Duty Cycle Range: 0% to 45%
Error Amplifier Gain: 90dB
Rs 750.00
Quick Info :
Output Voltage: 6V (fixed)
Input Voltage Range: 8V to 35V
Maximum Output Current: 1.5A
Dropout Voltage: 2V
Load Regulation: 100mV
Line Regulation: 3mV/V
Rs 60.00
Quick Info :
Type : 8-Channel Analog Multiplexer/Demultiplexer
Supply Voltage (Vcc) : 3V to 18V
ON Resistance (Ron) : 50Ω (typical at 5V)
Switching Speed : Fast transition times
Control Inputs : 3-bit binary select lines (S1, S2, S3)
Rs 55.00
Quick Info :
Number of Amplifiers : 4
Supply Voltage : ±3V to ±18V
Input Offset Voltage : 3mV
Input Bias Current : 30pA
Gain Bandwidth Product : 3MHz
Rs 50.00
Quick Info :
Transistor Type : PNP
Collector-Emitter Voltage : -40V
Collector-Base Voltage : -40V
Emitter-Base Voltage : -5V
Collector Current : -200mA
Power Dissipation : 625mW
Rs 10.00
Quick Info :
Transistor Type : NPN
Collector-Emitter Voltage : 80V
Collector-Base Voltage : 80V
Emitter-Base Voltage : 5V
Collector Current : 8A
Power Dissipation : 40W
Rs 30.00
Quick Info :
Operating Voltage : 3V to 18V
Current per LED : 2mA to 30mA
Reference Voltage : 1.2V to 12V
Typical Standby Current : 1.5mA
Package Types : DIP-18, SOIC-18
Operating Temperature Range : -40°C to +85°C
Rs 160.00
Quick Info :
Display Type : 10-segment LED/LCD/VFD driver
Package Type : DIP-18, SOIC-18
Logarithmic Scale : 3dB per step
Operating Voltage : 3V to 25V
LED Drive Current : Adjustable
Modes : Bar or dot display selectable
Rs 160.00
Quick Info :
Logic Type : 8-bit static shift register
Package Type : DIP-16, SOIC-16
Operating Voltage : 3V to 15V
Serial Data Input : 1-bit per clock pulse
Parallel Outputs : 8-bit buffered
Low Power Consumption : CMOS technology
Rs 150.00
Quick Info :
Logic Type : 8-bit serial-in, parallel-out shift register
Package Type : DIP-14, SOIC-14
Operating Voltage : 4.75V to 5.25V
Maximum Clock Frequency : 25MHz
Low Power Consumption : Typical 16mA at 5V
Propagation Delay : 18ns
Rs 80.00
Quick Info :
Package Type : TO-92
Voltage Rating : 500V
RMS On-State Current : 1A
Peak Surge Current : 8A (10ms)
Gate Trigger Voltage : ≤ 1.5V
Gate Trigger Current : ≤ 5mA
Rs 10.00
