Best Seller Items
-
-
Jumper Wire Male-Male 20cm
Quick Info :
- Connector : Male to Male
- 1 Cable : Rs. 6
- 1 Set (40pcs) : Rs. 240
Rs 6.00Jumper Wire Male-Male 20cm
Rs 6.00 -
2 – 10 Pin JST XH 2.54 Pitch Connector Cable and Base
Quick Info:
- Wire Type : 26AWG
- Pitch: 2.5mm±0.05
- length: 15cm
Rs 25.00 – Rs 75.00 -
Jumper Wire Male-Female 30cm
Quick Info :
- Connector : Male to Female
- 1 Cable : Rs. 8
- 1 Set (40pcs) : Rs. 320
Rs 8.00Jumper Wire Male-Female 30cm
Rs 8.00 -
Jumper Wire Male-Female 20cm
Quick Info :
- Connector : Male to Female
- 1 Cable : Rs. 6
- 1 Set (40pcs) : Rs. 240
Rs 6.00Jumper Wire Male-Female 20cm
Rs 6.00 -
LED 5mm Bulb Common Anode
Specification:
- 5mm Round Standard Directivity
- Color : Red, Blue, Green, White, Yellow
- UV Resistant : Eproxy
- Forward Current (IF): 30mA
- Forward Voltage (VF): 1.8V to 2.4V
Rs 4.00LED 5mm Bulb Common Anode
Rs 4.00
-
INA219 Bi Directional Current Sensor Module
Quick Info :
- Power Input : 3.0V-5.5V
- Up to +26V target voltage
- 0.1 ohm 1% 2W current sense resistor
Rs 950.00Rs 1,150.00INA219 Bi Directional Current Sensor Module
Rs 950.00Rs 1,150.00 -
Inductive Proximity Sensor PNP PL-05P
Quick Info :
- Sensing distance : 5mm
- Operating voltage : 10 – 30 VDC
- Response frequency : 800Hz
- Output method : PNP, 150mA load
Rs 690.00Inductive Proximity Sensor PNP PL-05P
Rs 690.00 -
IRFP264 N Channel MOSFET
Quick Info :
- Type of Control Channel: N -Channel
- Maximum Power Dissipation (Pd): 280 W
- Maximum Drain-Source Voltage |Vds|: 250 V
- Maximum Gate-Source Voltage |Vgs|: 20 V
- Maximum Gate-Threshold Voltage |Vgs(th)|: 4 V
- Maximum Drain Current |Id|: 38 A
Rs 450.00IRFP264 N Channel MOSFET
Rs 450.00 -
IRFZ44NPBF N Channel MOSFET Original
Quick Info :
- Drain Source Voltage (Vdss) : 55V
- Continuous Drain Current (Id) : 49A
- Power Dissipation (Pd) : 94W
Rs 390.00IRFZ44NPBF N Channel MOSFET Original
Rs 390.00 -
Jumper Wire Female-Female 10cm
Quick Info :
- Connector : Female to Female
- 1 Cable : Rs. 5
- 1 Set (40pcs) : Rs. 200
Rs 5.00Jumper Wire Female-Female 10cm
Rs 5.00 -
Jumper Wire Male-Female 10cm
Quick Info :
- Connector : Male to Female
- 1 Cable : Rs. 5
- 1 Set (40pcs) : Rs. 200
Rs 5.00Jumper Wire Male-Female 10cm
Rs 5.00 -
Jumper Wire Male-Male 10cm
Quick Info :
- Connector : Male to Male
- 1 Cable : Rs. 5
- 1 Set (40pcs) : Rs. 200
Rs 5.00Jumper Wire Male-Male 10cm
Rs 5.00 -
Jumper Wire Male-Male 30cm
Quick Info :
- Connector : Male to Male
- 1 Cable : Rs. 8
- 1 Set (40pcs) : Rs. 320
Rs 8.00Jumper Wire Male-Male 30cm
Rs 8.00 -
Keypad Flexible 12 Keys
Quick Info :
- 12-key membrane switch pad has 7 pin female header on end of flat cable
- White sticker on back can be peeled off for adhesive mounting
Rs 250.00Keypad Flexible 12 Keys
Rs 250.00 -
-
LCD 16X2 Keypad Shield
Quick Info :
- Operating Voltage: 5V
- 5 Push buttons.
- Left, Right, Up, Down and Select buttons
- Screen contrast adjustment
- Arduino Reset button
Rs 595.00LCD 16X2 Keypad Shield
Rs 595.00 -
LCD 16X4 Character Module
Quick Info :
- Operating Voltage is 4.7V to 5.3V
- Current consumption is 1mA without backlight
- Alphanumeric LCD display module, meaning can display alphabets and numbers
- Consists of four rows and each row can print 16 characters.
- Compatible with LCD to I2C Adapter Board
Rs 1,390.00LCD 16X4 Character Module
Rs 1,390.00 -
LCD 20×4 Character Module
Quick Info :
- Interface : I2C
- I2C Address : 0x3F
- Supply voltage : 5V
- Contrast Adjust : Through Potentiometer
- Backlight : Blue
Rs 1,100.00LCD 20×4 Character Module
Rs 1,100.00 -
LCD 20×4 Character Module with I2C Adapter
Quick Info :
- Interface : I2C
- I2C Address : 0x3F
- Supply voltage : 5V
- Contrast Adjust : Through Potentiometer
- Backlight : Blue
Rs 1,490.00LCD 20×4 Character Module with I2C Adapter
Rs 1,490.00 -
LDR Light Sensitive Module with Relay
Quick Info :
- Operating Voltage: 12V DC
- Module Dimensions: 5cm x 2.7cm x 2cm
- Sensor: Photosensitive resistance module
Rs 650.00LDR Light Sensitive Module with Relay
Rs 650.00 -
-
-
LiPo Battery 3.7V 1200mAH
Quick Info :
- Battery Type : Lithium Polymer (LiPo)
- Voltage : 3.7V nominal
- Capacity : 1200mAh
- Size : 60mm X 25mm
- Charging Voltage : 4.2V (fully charged)
- Discharge Rate : 1C to 25C
Rs 1,990.00LiPo Battery 3.7V 1200mAH
Rs 1,990.00 -
LiPo Battery 3.7V 250mA
Quick Info :
- Battery Type : Lithium Polymer (LiPo)
- Nominal Voltage : 3.7V DC
- Capacity : 250mAh
- Charging Voltage : 4.2V ± 0.05V
- Discharge Cutoff Voltage : ~3.0V
- Continuous Discharge Rate : ~1C – 2C
- Max Discharge Current : ~250mA – 500mA
Rs 690.00LiPo Battery 3.7V 250mA
Rs 690.00 -
LiPo Battery 3.7V 500mA
Quick Info :
- Battery Type : Lithium Polymer (LiPo)
- Nominal Voltage : 3.7V DC
- Capacity : 500mAh
- Dimensions : ~25mm x 45mm x 7mm
- Charging Voltage : 4.2V ± 0.05V
- Discharge Cutoff Voltage : ~3.0V
Rs 890.00LiPo Battery 3.7V 500mA
Rs 890.00 -
-
-
-
-
-
LM2596 CC/CV Li-Ion Charger/LED Power Supply Module
Quick Info :
- Input Voltage: 5-35V
- Input Voltage Must Be At Least 2V Above Output Voltage
- Output Voltage: 1.25-30V (infinitely adjustable)
- Constant Current Range: 0-3A (infinitely adjustable)
Rs 690.00 -
Magnet Block 30x10x2mm
Quick Info :
- Length: 30mm
- Width: 10mm
- Height: 2mm
Rs 100.00Magnet Block 30x10x2mm
Rs 100.00 -
Magnet Block 30x20x5mm
Quick Info :
- Length: 30mm
- Width: 20mm
- Height: 5mm
Rs 300.00Magnet Block 30x20x5mm
Rs 300.00 -
Magnifier With Auxiliary Clip TE800
Quick Info :
- Model : T-800
- Lens Diameter: Typically 2.5 inches
- Material: Optical-grade glass lens with a metal and ABS plastic frame
- Clips: Two adjustable alligator clips for holding components
- Lighting: Optional LED lights powered by AA batteries
- Flexibility: Fully adjustable joints for multiple angles and positions
Rs 2,790.00Magnifier With Auxiliary Clip TE800
Rs 2,790.00 -
MAX30102 Pulse Oximeter & Heart-Rate Module
Quick Info :
- LED Peak Wavelength: 660nm/880nm
- LED Supply Voltage: 3.3~5V
- Interface: I2C Interface
- Operating Temperature Range: -40°C to +85°C
Rs 590.00 -
MAX485 RS485 to TTL module
Quick Info :
- Working voltage：5V
- Connect to 2P terminal on board, for wiring of RS-485 to communicate
Rs 220.00MAX485 RS485 to TTL module
Rs 220.00 -
MAX7219 8 Way Display Module
Quick Info :
- Eight 7-Segment LED Displays with 0.36″ high red digits
- LED displays mounted in sockets
- Built-in MAX7219 LED Driver
- SPI 3-wire serial interface for easy hookup to MCU
- Can daisy-chain multiple modules together for larger displays
Rs 590.00MAX7219 8 Way Display Module
Rs 590.00 -
MAX7219 8 X 8 LED Dot Matrix Module V2
Quick Info :
- Single 8×8 LED Matrix Display with 1.3″ high bright red display
- Built-in MAX7219 LED Driver
- SPI 3-wire serial interface for easy hookup to MCU
Please note that the Jumper Cables need to be purchased separately
Rs 900.00MAX7219 8 X 8 LED Dot Matrix Module V2
Rs 900.00 -
-
MIC XLR Jack Male Metal
Quick Info :
- Microphone XLR Jack 3 Pin
Rs 290.00MIC XLR Jack Male Metal
Rs 290.00