Quick Info :
Impedance: 6 Ω
Rated Power Handling: 15 W
Magnet type : Double Magnet
Frequency Response: 108 Hz – 20 kHz
Speaker Diameter: 3 inches (78 mm)
Mounting Depth: 52 mm
Rs 590.00
Quick Info :
Operating Voltage: 5V
5 Push buttons.
Left, Right, Up, Down and Select buttons
Screen contrast adjustment
Arduino Reset button
Rs 595.00
Quick Info :
Operating Voltage: 12V DC
Module Dimensions: 5cm x 2.7cm x 2cm
Sensor: Photosensitive resistance module
Rs 650.00
Quick Info :
Frequency – 1559Mhz-1609Mhz
Active antenna noise figure < 1.5dB
Cable – RF1.13
Connector – I-PEX
Rs 650.00
Quick Info :
Input Voltage: 5-35V
Input Voltage Must Be At Least 2V Above Output Voltage
Output Voltage: 1.25-30V (infinitely adjustable)
Constant Current Range: 0-3A (infinitely adjustable)
Rs 690.00
Quick Info :
CPU Speed : 20MHzProgram Memory Size : 8KBRAM Memory Size : 512ByteNo. of Pins : 8 Pins
Rs 690.00
Quick Info :
Real Time Clock Module : DS1307
SD Card reader : standard SD card
RTC battery included
Rs 690.00
Quick Info :
Size (L x B x H) : 15 cm x 5 cm x 2 cm Weight : 100 g Size : 6 Inch
Rs 690.00
Quick Info :
Sensing distance : 5mm
Operating voltage : 10 – 30 VDC
Response frequency : 800Hz
Output method : PNP, 150mA load
Rs 690.00
Quick Info :
Operates with a single 3.3 V Supply
Bus Pin ESD Protection Exceeds ±16 kV HBM
High Input Impedance Allows for Up to 120 Nodes on a Bus
Rs 690.00
Quick info :
Output Power: 2x50W (stereo mode) or 100W (mono mode)
Frequency Response: 20Hz to 20kHz
Signal-to-Noise Ratio (SNR): ≥100dB
Chip: TPA3116D2
Power Supply Voltage: 12-24V DC
Rs 690.00
Quick Info :
Battery Type : Lithium Polymer (LiPo)
Nominal Voltage : 3.7V DC
Capacity : 250mAh
Charging Voltage : 4.2V ± 0.05V
Discharge Cutoff Voltage : ~3.0V
Continuous Discharge Rate : ~1C – 2C
Max Discharge Current : ~250mA – 500mA
Rs 690.00
Quick Info :
Input Voltage : AC 220 ~ 240V 50/60 HZ
Output Voltage: DC 5V
Output Current: 3A
Output type: Micro USB
Rs 700.00
Quick Info :
Single-Supply Operation (2.7V to 5.5V)
Best Detection Range: 10mm
High-Resolution Conversion of Light Intensity to Frequency
Programmable Color and Full-Scale Output Frequency
Rs 750.00
Quick Info :
Stackable design, easy to plug into the ARDUINO development board.
Coupled with the Arduino Bluetooth Bee Bluetooth module, and other Bluetooth devices can communicate Wirelessly.
Coupled with the XBee module, you can achieve two or more sets of communication between Arduino or Arduino and PC Communications.
Rs 750.00
Quick Info :
This infrared sensor trio detector and trio output Build-in TCRT5000 sensor
Number of channels : 3
Rs 750.00
Quick Info :
Power supply: 3-5v (Recommended 3.3v)
Communication mode: Standard IIC/SPI communication protocol
Chip built in AD 16bit converter, 16 bit data output
Gyro range: ±125 ±250 ±500 ±1000 ±2000 degrees /s
Rs 750.00
Quick Info
Supply voltage (typically): 3.3V
Battery not included
Battery : CR2032
Rs 790.00
Specifications :
Input Voltage : AC 100 ~ 240V 50/60 HZ
Output Voltage: DC 9V
Output Current: 1A
Plug Type : UK Plug
Rs 790.00
Quick Info :
Supply Voltage : 3-3.6 and 4.5-5.5
Temperature Range [°C] : -40 to +125
Output : Analog out / PWM / I²C
Interface : I²C
Resolution [bit]: 12
Rs 790.00
Quick Info :
Power Requirements: 2.7 to 6.5 VDC
Communication Interface: I²C (up to 400 kHz)
Operating temperature: -22 to +185 °F to +85 °C)
Dimensions: 0.73 x .65 in ( 1.8 x 1.7 cm)
Rs 850.00
Quick Info:
Current : 0A ~ 6A
Operating Voltage : 0V ~ 15.2V
Power : 60W
Temperature Range : -30C to 70C
Rs 850.00
Quick Info :
Length X Width : 12cm X 8 cm
Thickness : 1.0 mm
Type: Copper Clad PCB Board
Material: Epoxy Resin (FR4)
Copper Layer: Single-Sided
Size: A4
Copper Thickness: ~35µm
Rs 890.00
Quick Info :
50Watt / Cold White
Input(AC): 220VAC
Rs 890.00
