Best Seller Items
-
-
Jumper Wire Male-Male 20cm
Quick Info :
- Connector : Male to Male
- 1 Cable : Rs. 6
- 1 Set (40pcs) : Rs. 240
Rs 6.00Jumper Wire Male-Male 20cm
Rs 6.00 -
2 – 10 Pin JST XH 2.54 Pitch Connector Cable and Base
Quick Info:
- Wire Type : 26AWG
- Pitch: 2.5mm±0.05
- length: 15cm
Rs 25.00 – Rs 75.00 -
Jumper Wire Male-Female 30cm
Quick Info :
- Connector : Male to Female
- 1 Cable : Rs. 8
- 1 Set (40pcs) : Rs. 320
Rs 8.00Jumper Wire Male-Female 30cm
Rs 8.00 -
Jumper Wire Male-Female 20cm
Quick Info :
- Connector : Male to Female
- 1 Cable : Rs. 6
- 1 Set (40pcs) : Rs. 240
Rs 6.00Jumper Wire Male-Female 20cm
Rs 6.00 -
Jumper Wire Male-Male 30cm
Quick Info :
- Connector : Male to Male
- 1 Cable : Rs. 8
- 1 Set (40pcs) : Rs. 320
Rs 8.00Jumper Wire Male-Male 30cm
Rs 8.00
-
INA219 Bi Directional Current Sensor Module
Quick Info :
- Power Input : 3.0V-5.5V
- Up to +26V target voltage
- 0.1 ohm 1% 2W current sense resistor
Rs 950.00Rs 1,150.00INA219 Bi Directional Current Sensor Module
Rs 950.00Rs 1,150.00 -
INMP441 MEMS Omnidirectional Microphone Module
Quick Info :
- Digital Precision : Utilize the digital I2S interface boasting high precision 24-bit data for unparalleled audio quality.
- Optimal Signal-to-Noise Ratio: Benefit from a remarkable 61 dBA signal-to-noise ratio, ensuring clear and crisp sound reproduction.
- Enhanced Sensitivity :With a high sensitivity of -26 dBFS, capture audio with precision and clarity.
Rs 1,950.00INMP441 MEMS Omnidirectional Microphone Module
Rs 1,950.00 -
IRFP264 N Channel MOSFET
Quick Info :
- Type of Control Channel: N -Channel
- Maximum Power Dissipation (Pd): 280 W
- Maximum Drain-Source Voltage |Vds|: 250 V
- Maximum Gate-Source Voltage |Vgs|: 20 V
- Maximum Gate-Threshold Voltage |Vgs(th)|: 4 V
- Maximum Drain Current |Id|: 38 A
Rs 450.00IRFP264 N Channel MOSFET
Rs 450.00 -
IRFZ44NPBF N Channel MOSFET Original
Quick Info :
- Drain Source Voltage (Vdss) : 55V
- Continuous Drain Current (Id) : 49A
- Power Dissipation (Pd) : 94W
Rs 390.00IRFZ44NPBF N Channel MOSFET Original
Rs 390.00 -
Jumper Wire Female-Female 10cm
Quick Info :
- Connector : Female to Female
- 1 Cable : Rs. 5
- 1 Set (40pcs) : Rs. 200
Rs 5.00Jumper Wire Female-Female 10cm
Rs 5.00 -
Jumper Wire Male-Female 10cm
Quick Info :
- Connector : Male to Female
- 1 Cable : Rs. 5
- 1 Set (40pcs) : Rs. 200
Rs 5.00Jumper Wire Male-Female 10cm
Rs 5.00 -
Keypad Flexible 12 Keys
Quick Info :
- 12-key membrane switch pad has 7 pin female header on end of flat cable
- White sticker on back can be peeled off for adhesive mounting
Rs 250.00Keypad Flexible 12 Keys
Rs 250.00 -
Keypad Flexible 4 Keys
Quick Info :
- Arduino and Raspberry Pi compatible
- 4-key membrane switch pad has 5 pin female header on end of flat cable
- White sticker on back can be peeled off for adhesive mounting
Rs 285.00Keypad Flexible 4 Keys
Rs 285.00 -
-
LCD 16X2 Keypad Shield
Quick Info :
- Operating Voltage: 5V
- 5 Push buttons.
- Left, Right, Up, Down and Select buttons
- Screen contrast adjustment
- Arduino Reset button
Rs 595.00LCD 16X2 Keypad Shield
Rs 595.00 -
LCD 20×4 Character Module
Quick Info :
- Interface : I2C
- I2C Address : 0x3F
- Supply voltage : 5V
- Contrast Adjust : Through Potentiometer
- Backlight : Blue
Rs 1,100.00LCD 20×4 Character Module
Rs 1,100.00 -
LCD 20×4 Character Module with I2C Adapter
Quick Info :
- Interface : I2C
- I2C Address : 0x3F
- Supply voltage : 5V
- Contrast Adjust : Through Potentiometer
- Backlight : Blue
Rs 1,190.00LCD 20×4 Character Module with I2C Adapter
Rs 1,190.00 -
LDR Light Sensitive Module with Relay
Quick Info :
- Operating Voltage: 12V DC
- Module Dimensions: 5cm x 2.7cm x 2cm
- Sensor: Photosensitive resistance module
Rs 650.00LDR Light Sensitive Module with Relay
Rs 650.00 -
-
-
-
-
-
-
-
Liquid PH Sensor Module With Electrode Probe
Quick Info :
Liquid pH Value Detection Sensor
- Heating voltage: 5±0.2V
- Working current: 5-10mA
Electrode Probe for Liquid pH Value Detection Sensor Module
- PH range: 0-14 PH
- Temperature range: 0-60℃
Rs 5,990.00Rs 7,100.00Liquid PH Sensor Module With Electrode Probe
Rs 5,990.00Rs 7,100.00 -
LM2596 CC/CV Li-Ion Charger/LED Power Supply Module
Quick Info :
- Input Voltage: 5-35V
- Input Voltage Must Be At Least 2V Above Output Voltage
- Output Voltage: 1.25-30V (infinitely adjustable)
- Constant Current Range: 0-3A (infinitely adjustable)
Rs 690.00 -
Logic Level Converter Bi-Directional Module 5V to 3.3V
Quick Info :
- 4 channels can convert up to 4 logic signals
- Can convert between 1.8V, 2.8V, 3.3V and 5V logic circuits
- Bi-directional so can work with bi-directional buses such as I2C
- Utilizes N-Ch MOSFET transistors for level translation
Rs 100.00 -
Magnet Block 30x10x2mm
Quick Info :
- Length: 30mm
- Width: 10mm
- Height: 2mm
Rs 100.00Magnet Block 30x10x2mm
Rs 100.00 -
Magnet Block 30x20x5mm
Quick Info :
- Length: 30mm
- Width: 20mm
- Height: 5mm
Rs 300.00Magnet Block 30x20x5mm
Rs 300.00 -
Magnet Button Cell 10X2
Quick Info :
- Diameter: 10mm
- Height: 2mm
Rs 65.00Magnet Button Cell 10X2
Rs 65.00 -
Magnet Button Cell 12X2
Quick Info :
- Diameter: 12mm
- Height: 2mm
Rs 85.00Magnet Button Cell 12X2
Rs 85.00 -
-
MAX30102 Pulse Oximeter & Heart-Rate Module
Quick Info :
- LED Peak Wavelength: 660nm/880nm
- LED Supply Voltage: 3.3~5V
- Interface: I2C Interface
- Operating Temperature Range: -40°C to +85°C
Rs 590.00 -
MAX485 RS485 to TTL module
Quick Info :
- Working voltage：5V
- Connect to 2P terminal on board, for wiring of RS-485 to communicate
Rs 220.00MAX485 RS485 to TTL module
Rs 220.00 -
MAX6675 with Type K Thermocouple
Quick info:
- Supply voltage: 3 to 5.5V
- Module current: 50mA
- Module interface: Serial (SO, SCK, CS), 16-bit SPI compatible
- Thermocouple temperature range: 0 to 450°C
- Module sensor temperature range: 0 to 1024°C
Rs 790.00MAX6675 with Type K Thermocouple
Rs 790.00 -
MAX7219 8 Way Display Module
Quick Info :
- Eight 7-Segment LED Displays with 0.36″ high red digits
- LED displays mounted in sockets
- Built-in MAX7219 LED Driver
- SPI 3-wire serial interface for easy hookup to MCU
- Can daisy-chain multiple modules together for larger displays
Rs 590.00MAX7219 8 Way Display Module
Rs 590.00 -
MAX7219 8 X 8 LED Dot Matrix Module V2
Quick Info :
- Single 8×8 LED Matrix Display with 1.3″ high bright red display
- Built-in MAX7219 LED Driver
- SPI 3-wire serial interface for easy hookup to MCU
Please note that the Jumper Cables need to be purchased separately
Rs 900.00MAX7219 8 X 8 LED Dot Matrix Module V2
Rs 900.00 -
MC-38 Wired Magnetic Door Window Switch
Quick Info :
- Connection type : Normally Open
- Actuation Distance (mm) : 15 ~ 25
- Connecting cable length (cm) : 30
Rs 290.00MC-38 Wired Magnetic Door Window Switch
Rs 290.00 -