Best Seller Items
-
-
Jumper Wire Male-Male 20cm
Quick Info :
- Connector : Male to Male
- 1 Cable : Rs. 6
- 1 Set (40pcs) : Rs. 240
Rs 6.00Jumper Wire Male-Male 20cm
Rs 6.00 -
2 – 10 Pin JST XH 2.54 Pitch Connector Cable and Base
Quick Info:
- Wire Type : 26AWG
- Pitch: 2.5mm±0.05
- length: 15cm
Rs 25.00 – Rs 75.00 -
Jumper Wire Male-Female 30cm
Quick Info :
- Connector : Male to Female
- 1 Cable : Rs. 8
- 1 Set (40pcs) : Rs. 320
Rs 8.00Jumper Wire Male-Female 30cm
Rs 8.00 -
Jumper Wire Male-Female 20cm
Quick Info :
- Connector : Male to Female
- 1 Cable : Rs. 6
- 1 Set (40pcs) : Rs. 240
Rs 6.00Jumper Wire Male-Female 20cm
Rs 6.00 -
Jumper Wire Male-Male 30cm
Quick Info :
- Connector : Male to Male
- 1 Cable : Rs. 8
- 1 Set (40pcs) : Rs. 320
Rs 8.00Jumper Wire Male-Male 30cm
Rs 8.00
-
AC-DC 24V 5A SMPS Power Adapter
Quick Info :
- Input Voltage : AC 100 ~ 240V 50/60 HZ
- Output Voltage: DC 24V
- Output Current: 5A
- Plug Type : UK Plug
Rs 2,200.00AC-DC 24V 5A SMPS Power Adapter
Rs 2,200.00 -
AC-DC 5V 1A SMPS Power Adapter
Quick Info :
- Input Voltage : AC 100 ~ 240V 50/60 HZ
- Output Voltage: DC 5V
- Output Current: 1A
- Plug Type : UK Plug
Rs 500.00AC-DC 5V 1A SMPS Power Adapter
Rs 500.00 -
AC-DC 5V 3A SMPS Micro USB Power Adapter
Quick Info :
- Input Voltage : AC 220 ~ 240V 50/60 HZ
- Output Voltage: DC 5V
- Output Current: 3A
- Output type: Micro USB
Rs 700.00AC-DC 5V 3A SMPS Micro USB Power Adapter
Rs 700.00 -
AC-DC 5V 700mA 3.5W
Quick Info :
- Output Voltage: DC5V (±0.1V)
- Output Current: 700mA
- Power: 3.5W
Rs 350.00AC-DC 5V 700mA 3.5W
Rs 350.00 -
ACS712 30A Current Sensor Module
Quick Info :
- The current sensor chip : ACS712
- Current measuring : up to 30A
- 5V power supply, on-board power indicator
Rs 550.00ACS712 30A Current Sensor Module
Rs 550.00 -
Active GPS Patch Antenna (25*25)
Quick Info :
- Frequency – 1559Mhz-1609Mhz
- Active antenna noise figure < 1.5dB
- Cable – RF1.13
- Connector – I-PEX
Rs 650.00Active GPS Patch Antenna (25*25)
Rs 650.00 -
AD8232 ECG Sensor
Quick Info :
- Operating Voltage – 3.3V
- Analog Output
- Leads-Off Detection
- Shutdown Pin
Rs 2,290.00AD8232 ECG Sensor
Rs 2,290.00 -
ADS1115 16 Bit ADC Module
Quick Info :
- WIDE SUPPLY RANGE: 2.0V to 5.5V
- PROGRAMMABLE DATA RATE: 8SPS to 860SPS
Rs 1,750.00ADS1115 16 Bit ADC Module
Rs 1,750.00 -
-
-
Alphatronic Raspberry Pi Pico Starter Kit V1
Quick Info :
- Microcontroller : Raspberry Pi Pico
- Modules : Ultrasonic, Servo, Sound sensors
- Breadboard, Jumpers Wires and many more
Rs 6,475.00Alphatronic Raspberry Pi Pico Starter Kit V1
Rs 6,475.00 -
Analog Hall Effect Sensor Module
Quick Info :
- Operating Voltage: 5V DC
- Current Draw: 8mA
- Dimensions: 18 x 15 x 5 mm (L x W x H)
Rs 290.00Analog Hall Effect Sensor Module
Rs 290.00 -
Analog TDS Sensor Module
Quick Info :
- Wide voltage operation :3.3 ~ 5.5 V
- Operating current: 3-6mA
- Measuring Range：0-1000ppm
Rs 2,900.00Analog TDS Sensor Module
Rs 2,900.00 -
Arduino Compatible ADK USB Host Shield
Quick Info :
- Works with standard (dual 5/3.3V) and 3.3V-only
- Supports HID devices, such as keyboards, mice, joysticks, etc.
- Compatible with Mass storage devices, such as USB sticks, memory card readers and external hard drives
Rs 1,990.00Arduino Compatible ADK USB Host Shield
Rs 1,990.00 -
Arduino Compatible Leonardo
Quick Info :
- Microcontroller: ATmega32u4
- Operating Voltage: 5V
- Digital I/O Pins: 20
- PWM Channels: 7
- Analog Input Channels: 12
Rs 2,990.00Arduino Compatible Leonardo
Rs 2,990.00 -
Arduino Compatible LilyPad
Quick Info :
- Microcontroller: ATMega32u4
- Operating Voltage: 3.3V
- Digital I/O pins: 9 (4 PWM)
- Analog Input Pins: 4
Rs 1,850.00Arduino Compatible LilyPad
Rs 1,850.00 -
Arduino Compatible Mega 2560 With USB Cable
Quick Info :
- Microcontroller : ATmega2560
- Operating Voltage : 5V
- Input Voltage (recommended) : 7-12V
- Input Voltage (limit) : 6-20V
- Digital I/O Pins : 54 (of which 15 provide PWM output)
- Analog Input Pins : 16
Rs 6,100.00Arduino Compatible Mega 2560 With USB Cable
Rs 6,100.00 -
Arduino Compatible Pro Micro
Quick Info :
Specifications:
- Microcontroller : ATmega32U4
- Operating Voltage : 5V
- Digital I/O Pins : 20
- PWM Channels : 7
- Analog Input Channels : 12
Rs 1,250.00Arduino Compatible Pro Micro
Rs 1,250.00 -
Arduino Compatible Sensor Shield
Quick Info :
- Suitable for Arduino UNO and Mega Boards
- IIC, Bluetooth, SD Card Interface
- APC220 wireless RF module communication interface
- RB URF v1.1 ultrasonic sensors interface
- 128 x 64 LCD parallel and 32 servo controller interface
Rs 550.00Arduino Compatible Sensor Shield
Rs 550.00 -
Arduino Compatible XD-204 Data Logger Shield
Quick Info :
- Real Time Clock Module : DS1307
- SD Card reader : standard SD card
- RTC battery included
Rs 690.00 -
Arduino Nano Compatible
Quick Info:
- Microcontroller: ATmega328
- Operating Voltage: 5 V
- Analog I/O Pins: 8
- Input Voltage: 7-12 V
- Digital I/O Pins: 22
Rs 1,190.00Rs 1,390.00Arduino Nano Compatible
Rs 1,190.00Rs 1,390.00 -
AS608 Fingerprint Reader Sensor Module
Specifications :
- Supply voltage: 3.6 – 6.0VDC
- Operating current: 120mA max
- Peak current: 150mA max
- Fingerprint imaging time: < 1.0 seconds
- Storage capacity: 162 templates
Rs 3,500.00AS608 Fingerprint Reader Sensor Module
Rs 3,500.00 -
ATtiny85 Development Board
Quick Info:
- Support for the Arduino IDE 1.0+ (OSX/Win/Linux)
- Power via USB or External Source
- Onboard 5V Regulator
- 6 I/O Pins
Rs 450.00ATtiny85 Development Board
Rs 450.00 -
ATTINY85-20PU Atmel
Quick Info :
- : 20MHz
- : 8KB
- : 512Byte
- : 8 Pins
Rs 690.00ATTINY85-20PU Atmel
Rs 690.00 - : 20MHz
-
-
BH1750 Ambient Light Sensor
Quick Info :
- Power Supply: 2.4V-3.6V (typically 3.0V)
- Less current consumption: 0.12mA
- Measuring Rang: 1-65535lx
- Communication: I2C bus
Rs 590.00BH1750 Ambient Light Sensor
Rs 590.00 -
Bluetooth XBee Shield V3 Module Wireless Control
Quick Info :
- Stackable design, easy to plug into the ARDUINO development board.
- Coupled with the Arduino Bluetooth Bee Bluetooth module, and other Bluetooth devices can communicate Wirelessly.
- Coupled with the XBee module, you can achieve two or more sets of communication between Arduino or Arduino and PC Communications.
Rs 750.00 -
BMP180 Digital Barometric Pressure Sensor
Quick Info :
- Power : 3 to 5VDC
- Pressure sensing range : 300- 1100 h Pa (9000m to -500m above sea level)
- This board/chip uses I2C 7-bit address 0x77.
Rs 450.00 -
-
-
Car Automobile Fuse Holder 2-30A
Quick info :
- The fuse holder works with any 2-30 amp blade fuse.
- The structure of the fuse holder provides extra protection against water and dust.
Rs 190.00Car Automobile Fuse Holder 2-30A
Rs 190.00 -
Cascaded MAX7219 4 Way LED Dot Matrix Module
Quick Info :
- A single module can drive a total of 8 * 8 dot matrix overcast
- The module voltage: 5V
- Module Size: 12.8 cm (length) X 3.2 cm (width) X 1.3 cm (height)
Rs 1,650.00Cascaded MAX7219 4 Way LED Dot Matrix Module
Rs 1,650.00 -