Best Seller Items
-
1K – 100K Potentiometer
Quick Info :
- 1K, 5K, 10K, 50K, 100K Ohm
- Linear taper, carbon film type
- Single-Turn
Rs 30.00 – Rs 100.001K – 100K Potentiometer
Rs 30.00 – Rs 100.00 -
-
ESP8266 ESP-01 WIFI module
Quick Info :
- 802.11 b/g/n
- Operating Voltage: 3.3V
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
Rs 590.00ESP8266 ESP-01 WIFI module
Rs 590.00 -
NodeMCU Wi-Fi Development Board
Quick Info :
- Microcontroller: ESP8266
- Operating Voltage: 3.3V
- Input Voltage: 7-12V
- Digital I/O Pins (DIO): 16
- Analog Input Pins (ADC): 1
Rs 1,150.00Rs 1,450.00NodeMCU Wi-Fi Development Board
Rs 1,150.00Rs 1,450.00 -
ESP32 S3 WROOM DEVKITC
Quick info:
- Dual-Core Xtensa® LX7 Processor – Runs at up to 240 MHz for high-performance computing.
- Wi-Fi 4 & Bluetooth 5 (LE) – Supports 2.4 GHz Wi-Fi and Bluetooth Low Energy (BLE) for wireless connectivity.
- USB OTG (Full-Speed) – Built-in USB 1.1 OTG for flashing, communication, and JTAG debugging.
Rs 2,290.00Rs 2,490.00ESP32 S3 WROOM DEVKITC
Rs 2,290.00Rs 2,490.00 -
BMS 3S 40A Li-ion Battery Protection Board
Quick info :
- Applicable voltage: 12V
- Charge current: 20A (Max)
- Discharge current: 40A
- Overdischarge protection voltage: 2.5V ± 0.05V per cell
- Overcharge protection voltage: 4.25V ± 0.05V per cell
Rs 590.00
-
-
Active GPS Patch Antenna (25*25)
Quick Info :
- Frequency – 1559Mhz-1609Mhz
- Active antenna noise figure < 1.5dB
- Cable – RF1.13
- Connector – I-PEX
Rs 650.00Active GPS Patch Antenna (25*25)
Rs 650.00 -
LM2596 CC/CV Li-Ion Charger/LED Power Supply Module
Quick Info :
- Input Voltage: 5-35V
- Input Voltage Must Be At Least 2V Above Output Voltage
- Output Voltage: 1.25-30V (infinitely adjustable)
- Constant Current Range: 0-3A (infinitely adjustable)
Rs 690.00 -
ATTINY85-20PU Atmel
Quick Info :
- : 20MHz
- : 8KB
- : 512Byte
- : 8 Pins
Rs 690.00ATTINY85-20PU Atmel
Rs 690.00 - : 20MHz
-
-
-
Arduino Compatible XD-204 Data Logger Shield
Quick Info :
- Real Time Clock Module : DS1307
- SD Card reader : standard SD card
- RTC battery included
Rs 690.00 -
Wire Cutter Nipper 12
Quick Info :
- Size (L x B x H) : 15 cm x 5 cm x 2 cm
- Weight : 100 g
- Size : 6 Inch
Rs 690.00Wire Cutter Nipper 12
Rs 690.00 -
-
SN65HVD230 CAN Module
Quick Info :
- Operates with a single 3.3 V Supply
- Bus Pin ESD Protection Exceeds ±16 kV HBM
- High Input Impedance Allows for Up to 120 Nodes on a Bus
Rs 690.00SN65HVD230 CAN Module
Rs 690.00 -
AC-DC 5V 3A SMPS Micro USB Power Adapter
Quick Info :
- Input Voltage : AC 220 ~ 240V 50/60 HZ
- Output Voltage: DC 5V
- Output Current: 3A
- Output type: Micro USB
Rs 700.00AC-DC 5V 3A SMPS Micro USB Power Adapter
Rs 700.00 -
TCS3200 Color Recognition Sensor Module
Quick Info :
- Single-Supply Operation (2.7V to 5.5V)
- Best Detection Range: 10mm
- High-Resolution Conversion of Light Intensity to Frequency
- Programmable Color and Full-Scale Output Frequency
Rs 750.00TCS3200 Color Recognition Sensor Module
Rs 750.00 -
Bluetooth XBee Shield V3 Module Wireless Control
Quick Info :
- Stackable design, easy to plug into the ARDUINO development board.
- Coupled with the Arduino Bluetooth Bee Bluetooth module, and other Bluetooth devices can communicate Wirelessly.
- Coupled with the XBee module, you can achieve two or more sets of communication between Arduino or Arduino and PC Communications.
Rs 750.00 -
3 Channel Line TCRT5000 Tracking Module
Quick Info :
- This infrared sensor trio detector and trio output
- Build-in TCRT5000 sensor
- Number of channels : 3
Rs 750.003 Channel Line TCRT5000 Tracking Module
Rs 750.00 -
GY-BMI160 Module 6DOF 6 Axis Gyroscope
Quick Info :
- Power supply: 3-5v (Recommended 3.3v)
- Communication mode: Standard IIC/SPI communication protocol
- Chip built in AD 16bit converter, 16 bit data output
- Gyro range: ±125 ±250 ±500 ±1000 ±2000 degrees /s
Rs 750.00GY-BMI160 Module 6DOF 6 Axis Gyroscope
Rs 750.00 -
DS1302 Real Time Clock Module
Quick Info
- Supply voltage (typically): 3.3V
- Battery not included
- Battery : CR2032
Rs 790.00DS1302 Real Time Clock Module
Rs 790.00 -
MAX6675 with Type K Thermocouple
Quick info:
- Supply voltage: 3 to 5.5V
- Module current: 50mA
- Module interface: Serial (SO, SCK, CS), 16-bit SPI compatible
- Thermocouple temperature range: 0 to 450°C
- Module sensor temperature range: 0 to 1024°C
Rs 790.00MAX6675 with Type K Thermocouple
Rs 790.00 -
STM32F103C8T6 Development Board Module
Quick info :
- Model : STM32F103C8T6
- Core: ARM 32 Cortex-M3 CPU
- 72MHz work frequency.
- 64K flash memory, 20K SRAM.
- 2.0-3.6V power, I/O.
Rs 790.00STM32F103C8T6 Development Board Module
Rs 790.00 -
USB to Serial RS232 Adapter
Quick Info :
- Option 1 : DB9 Connector
- Option 2 : DB9 and DB25 Connectors
Rs 850.00 – Rs 990.00 -
-
HDMI to Mini HDMI 1.5m
Quick Info :
- Connector Type: Mini HDMI Male (HDMI C), HDMI Male (HDMI A)
- Length : 1.5 m
Rs 890.00HDMI to Mini HDMI 1.5m
Rs 890.00 -
-
Project Enclosure 136mm x68mm x 50mm
Quick Info :
- Dimensions: 136mm x 68mm x 50mm
Rs 890.00Project Enclosure 136mm x68mm x 50mm
Rs 890.00 -
-
GP AA Rechargeable NiMH Battery
Quick info :
Brand: GP
Voltage: 1.2V
Capacity: 2600mAH
Package: 4 x AA Rechargeable NiMH BatteriesRs 890.00Rs 990.00GP AA Rechargeable NiMH Battery
Rs 890.00Rs 990.00 -
MAX7219 8 X 8 LED Dot Matrix Module V2
Quick Info :
- Single 8×8 LED Matrix Display with 1.3″ high bright red display
- Built-in MAX7219 LED Driver
- SPI 3-wire serial interface for easy hookup to MCU
Please note that the Jumper Cables need to be purchased separately
Rs 900.00MAX7219 8 X 8 LED Dot Matrix Module V2
Rs 900.00 -
Wire Pliers / Cutter Bundle Pack
Quick Info :
- 6 ” Diagonal Cutters
- 6 ” Combination Cutters
- 6 ” Needle Nose Wire Cutters
Rs 900.00Wire Pliers / Cutter Bundle Pack
Rs 900.00 -
-
-
-
-
INA219 Bi Directional Current Sensor Module
Quick Info :
- Power Input : 3.0V-5.5V
- Up to +26V target voltage
- 0.1 ohm 1% 2W current sense resistor
Rs 950.00Rs 1,150.00INA219 Bi Directional Current Sensor Module
Rs 950.00Rs 1,150.00 -
4S 40A Li-ion Lithium 18650 Battery BMS Protection Board
Quick Info :
- Capable Lithium battery : 18650, 26650, (Lipo) lithium polymer battery
- Product Size: 46 * 60 * 3.4mm
- Product weight: 10.3g
- Charging voltage: 16.8V – 18.1V
Rs 950.00