Quick Info :
Voltage: 5V
Power Consumption : 65mA
Sensing range : < 120 °, within 7 meters
Rs 290.00
Specifications :
Input Voltage: 5V
Current Draw: 20mA (Max)
Range: 2cm – 400 cm
Rs 320.00Rs 430.00
Quick Info :
Operating Voltage: 5V
Current Consumption: 30-60mA
Frequency: 38kHz
Wavelength: 940nm
Rs 220.00
Quick Info :
Chip type: VS1838B
Operating Voltage: 3.3V to 5V
Current Consumption: 1.5mA peak
Receiving angle: 90 °
Reception distance: 17m
Rs 220.00
Quick Info :
Working Voltage : 3.3v to 5v
Detectable Distance : 2 ~ 30cm,
Detection angle : 35 °
Comparator chip: LM393
Rs 180.00
Quick Info :
3V-6V DC Supply Voltage
On-board LDO Voltage regulator
Built-in Voltage level convertor (MOSFET based)
It can be interface with 3.3V or 5V Microcontroller.
Rs 690.00
Quick Info :
Adjustable sensitivity (via blue digital potentiometer adjustment)
Operating voltage 3.3V-5V
Output Type : Digital switching outputs (0 and 1) -D0
Using LM393 comparator chip, stable
Rs 130.00
Quick Info :
Operating voltage : 3.3 V
Operating current : 4~5 mA
Signal to noise ratio : 54 dB
Rs 200.00
Quick Info :
Operating voltage – 2.0V~5.5V
Operating current – VDD = 3V, no load
At low power mode typical 1.5uA, maximum 3.0uA
Rs 180.00
Quick Info :
Working voltage of 3.3V to 5V
Output form: digital switch output (0 and 1)
Using infrared reflection sensors TCRT5000
Test reflection distance: 1mm to 25mm
Rs 190.00Rs 270.00
Quick Info :
Senses Bus Voltages : 0 V to 36 V
High-Side or Low-Side Sensing
Reports Current, Voltage, and Power
Operates from 2.7-V to 5.5-V Power Supply
Rs 900.00Rs 1,650.00
Quick Info :
The current sensor chip : ACS712
Current measuring : up to 5A
5V power supply, on-board power indicator
Rs 550.00
Quick Info :
Model: GY-521
Chip: MPU-6050
Power supply: 3.3V
Communication mode: standard IIC communication protocol
Rs 790.00
Quick Info :
Optical sensor: IR and red LED combined with a photodetector
Measures absorbance of pulsing blood
I2C interface plus INT pin
3.3V power supply complete pulse oximeter and heart rate sensor solution, simplifies design, integrated LEDs, photo sensor, and high-performance analog front
Rs 490.00
Quick info:
Normally Open
Voltage:
Switching (VDC-MAX.): 200
Breakdown (VDC-MIN): 250
Arc-Quench (VDC-MIN): 200
Current:
Switching (AMPERES-MAX.): 0.5
Carry (AMPERES-MAX.): 1.2
Rs 90.00
Quick Info :
Operating Voltage is +5V
Can be used to Measure or detect LPG, Alcohol, Propane, Hydrogen, CO and even methane
Analog output voltage: 0V to 5V
Digital Output Voltage: 0V or 5V (TTL Logic)
Rs 490.00
Quick Info :
Operating Voltage : 3.3V ~ 5.5V
Infrared Wavelength Detection : 760nm ~ 1100nm
Sensor Detection Angle : 60°
Rs 280.00
Quick Info :
Working Voltage : 3 to 5V DC
Humidity Range : 20-80% humidity; ±5% accuracy
Temperature Range : -20°C to 50°C temperature; ±2°C accuracy
Rs 390.00
Quick Info :
Voltage sensing range – 5v to 25v
Voltage Analog Resolution: 0.00489V
Rs 150.00
Quick Info :
Working voltage: 3.3V~5V
The output form: Digital switching outputs. (0 and 1)
Pin Configuration : VCC, GND, Dout and Aout
Rs 250.00
Quick Info :
Sensing distance: 5mm
Operating voltage: DC 10-30V
Screw hole : 3.2mm, Pitch : 10.5mm
Wire length : 100cm (39-inch)
Rs 690.00
Quick Info :
Interface: I²C (up to 3.4 MHz) and SPI (3 and 4 wire, up to 10 MHz)
Compatible with 3.3V and 5V Systems
Gas, humidity, pressure and temperature.
Rs 3,290.00
Quick Info :
Operating voltage: 3.3V~5V.
Adjustable sensitivity (shown in blue digital potentiometer adjustment)
Dual output mode,analog output more accurate.
A fixed bolt hole for easy installation.
With power indicator (red) and digital switching output indicator (green).
Rs 230.00
Quick Info :
Operating Voltage: 2.5V to 5.0V Power consumption: 150mA Detect/Measure: NH3, Nox, CO2, Alcohol, Benzene, Smoke Typical operating Voltage: 5V
Rs 490.00
Specifications:
Working Voltage: DC5V
Working Current: 30mA(MAX)
Response Time: <500mS
Insulation Resistance: 100M¦¸(Min)
Rs 4,350.00
Quick Info :
Power Supply Voltage : 5V
Size : 27 * 17mm
Communication Type : serial port communication (TTL level)
Rs 650.00
Quick Info :
Operating Voltage: 3.3V DC to 5V DC
Output Current : 15mA
PCB Size : 32 x 14mm
Rs 240.00
Quick Info
Working voltage : 5V
Output format : Digital switching output (0 and 1), and analog voltage output AO
Potentiometer adjust the sensitivity
Uses a wide voltage LM393 comparator
Rs 290.00
Quick info :
Model: TTP223.
Dimensions: 15mm x 11mm.
Input Voltage: 2 Volt – 5.5 Volts DC.
Rs 60.00
Quick info :
Operating voltage: 3.3V~5V
Interface: PH2.54-3P
Rs 290.00
Quick Info :
Digital Precision : Utilize the digital I2S interface boasting high precision 24-bit data for unparalleled audio quality.Optimal Signal-to-Noise Ratio : Benefit from a remarkable 61 dBA signal-to-noise ratio, ensuring clear and crisp sound reproduction.Enhanced Sensitivity :With a high sensitivity of -26 dBFS, capture audio with precision and clarity.
Rs 1,290.00
Quick Info :
Liquid pH Value Detection Sensor
Heating voltage: 5±0.2V
Working current: 5-10mA
Electrode Probe for Liquid pH Value Detection Sensor Module
PH range: 0-14 PH
Temperature range: 0-60℃
Rs 5,990.00Rs 7,100.00
