Quick info :
Model: TTP223.
Dimensions: 15mm x 11mm.
Input Voltage: 2 Volt – 5.5 Volts DC.
Rs 60.00
Quick info :
Operating voltage: 3.3V~5V
Interface: PH2.54-3P
Rs 290.00
Quick Info :
Liquid pH Value Detection Sensor
Heating voltage: 5±0.2V
Working current: 5-10mA
Electrode Probe for Liquid pH Value Detection Sensor Module
PH range: 0-14 PH
Temperature range: 0-60℃
Rs 5,990.00Rs 7,100.00
Quick Info :
Operating Voltage : 1.8v – 3.6v DC
Temperature Sensor Range : -40-80°C
Accuracy : 1.0 °C
Resolution : 0.01°C
Barometric Pressure Sensor Range : 30,000 – 110,000 Pa
Rs 390.00
Quick Info :
Working voltage : 3.3V ~ 5V
Output type: Digital switching output (0 and 1)
Wide voltage : comparator LM393
Rs 220.00
Quick Info :
Vcc Range Typical 3.0 – 5.5V
Collector Light Current
20 lux 10uA (typical)
100 lux 50uA (typical)
Spectral Detection
Detection Range 440nm-800nm
Rs 590.00
Quick Info :
Test Voltage range: DC3 – 25V (on 5V) or DC3 – 16.5V (on 3.3V)
Monitors Both Charge and Discharge
Complete High-Side Current Sensing
Current Sensing up to 3A
Rs 1,950.00
Quick Info :
Biometric Pulse Rate or Heart Rate detecting sensor
Plug and Play type sensor
Operating Voltage: +5V or +3.3V
Current Consumption: 4mA
Rs 690.00
Specifications :
Operating voltage : 4.5 V to 5.5 V
Output type : Analog Voltage
Distance measuring range : 10 cm to 80 cm (4″ to 32″)
Rs 1,990.00
Quick Info :
Power requirements: 5 VDC
Current Consumption: 150mA
DO output: TTL digital 0 and 1 ( 0.1 and 5V)
AO output: 0.1- 0.3 V (relative to pollution), the maximum concentration of a voltage of about 4V
Detecting Concentration: 0.05-10mg/L Alcohol
Rs 590.00
Quick Info :
The current sensor chip : ACS712
Current measuring : up to 20A
5V power supply, on-board power indicator
Rs 550.00
Quick Info :
Working Voltage : DC 5V~24V
Flow Rate Range : 1~30L/min
Load Capacity: ≤10mA (DC 5V)\
Water Inlet/ Outlet Diameter : 0.5 inch
Rs 1,590.00
Quick Info :
On-board TTP224 capacitive touch 4 key IC
On-board 4 road level indicator.
Working voltage: 2 V to 5.5 V DC
PCB board size: 35(mm) x29 (mm).
Rs 320.00
Quick Info :
Measures AC voltage up to 250V
Built-in ZMPT101B voltage transformer (1000:1000 ratio)
High galvanic isolation up to 4000V for safety
Wide supply voltage: 5V to 30V DC
Compatible with Arduino, ESP8266, Raspberry Pi
Adjustable analog output for versatile applications
Rs 540.00
Quick Info :
Power Supply: 2.4V-3.6V (typically 3.0V)
Less current consumption: 0.12mA
Measuring Rang: 1-65535lx
Communication: I2C bus
Rs 590.00
Quick info:
Supply voltage: 3 to 5.5V
Module current: 50mA
Module interface: Serial (SO, SCK, CS), 16-bit SPI compatible
Thermocouple temperature range: 0 to 450°C
Module sensor temperature range: 0 to 1024°C
Rs 790.00
Quick Info :
Working Voltage : DC 3-5V
Working Current : <20mA
Operating temperature: 10~30 Celsius
Sensor Type : Analog
Rs 130.00
Quick Info :
LCD Size: 35.7*16.8mm
Operation Temperature: -15°c to 70°c
Humidity measurement range: 10%~99%
Rs 590.00
Quick Info :
Type : Sensor Brick
Interface : 3PIN
Power Supply : 5V
Board Size : 30 × 24 × 1.6mm
Rs 950.00
Quick info:
Temperature Cutoff: 102-145
Rated Current: 2A
Rated Voltage: 250V~
Rs 30.00
Quick info :
Model: TCS3472
Communication: I2C
Dimensions: 20.44mm / 0.8″ x 20.28mm / 0.79″
Rs 1,100.00
Quick info :
Model: AD8495
Sensing Accuracy Range: ± 1°C around room temperature, ± 2°C for −25°C to +400°C, beyond that range see the AN-1087 app note
Supply Voltage: 3-18VDC
Thermocouple Type: K-Type only
Rs 3,790.00
Quick Info :
Temperature range: -50 -110°C
Dimensions: 48.5 * 40mm
Temperature control mode: ON / OFF
Control accuracy: 0.1 °C
Output voltage: DC 12V
Rs 750.00
Quick Info :
The main chip: LM393, 801S
Working voltage: DC 5V
With analog and TTL level signal output signal output
Rs 690.00
Quick Info :
Power requirements : VCC – 5V±0.1
DO output : TTL digital 0 and 1 (0.1 and 5V)
AO output : 0.1-0 .3 V (relative to pollution), the maximum concentration of a voltage of about 4V
Detection Gas : Natural gas/Methane
Detection Concentration : 200-10000ppm (Natural gas / Methane)
Rs 590.00
Quick Info :
On-board TTP226 IC
On-board 4 road level indicator.
Working voltage: 2 V to 5.5 V DC
PCB board size: 47.4 (mm) x 46 (mm)
Rs 495.00
Quick Info :
4mm detection distance with ±10% accuracy
Adjustable sensitivity range: 0-3.8mm
Detects magnetic and non-magnetic metals
Built-in LED indication for switched state
IP67 waterproof protection rating
3-wire connection: VCC, GND, NPN NO output
Rs 690.00
Quick Info :
Model : AM2301
Temperature Range : -40°C to +80°C
Humidity Range : 0% to 99% RH
Supply Voltage : 3.3V – 5V DC
Accuracy (Temperature) : ±0.5°C
Accuracy (Humidity) : ±3% RH
Resolution (Temperature) : 0.1°C
Resolution (Humidity) : 0.1% RH
Rs 1,490.00
Quick Info :
Power Rating : 100mW
Operating Voltage : Compatible with 3.3V to 5V systems
Diameter : 8mm
Material : Cadmium Sulfide (CdS)
Dark Resistance : ≥ 1MΩ (at 10 Lux)
Light Resistance : 5kΩ to 20kΩ (at 100 Lux)
Rs 45.00
Quick Info :
Dark Resistance : ≥ 1MΩ (at 10 Lux)
Diameter : 5mm
Material : Cadmium Sulfide
Light Resistance : 5kΩ to 20kΩ (at 100 Lux)
Spectral Peak : ~540 nm
Power Rating : 100mW
Rs 15.00
Quick Info :
Operating Voltage : 4V to 30V DC
Output Voltage : 0 mV + (10 mV/°C × Temperature)
Temperature Range : -55°C to +150°C
Accuracy : ±0.5°C at 25°C
Linear Scale Factor : 10 mV/°C
Response Time : Typically less than 1 second
Rs 140.00
Quick Info :
Type : Strain Gauge Load Cell
Material : Aluminum Alloy
Capacity : 50kg (Maximum Load)
Shape : Rectangular
Rated Output : ~1.0mV/V to 2.0mV/V
Excitation Voltage : 5V to 12V DC (Recommended 10V)
Zero Balance : ±0.1mV/V
Rs 260.00
Quick Info :
Wavelength Sensitivity : 850nm
Case Material : Black epoxy for enhanced IR filtering
Package Type : ,5mm
Operating Voltage : 2.7V – 5.5V
Current Consumption : ≤1.5mA (typical)
Reception Distance : 10m – 30m (depends on model)
Carrier Frequency : 30kHz – 56kHz
Rs 30.00
Quick Info :
Resistance (at 25°C): 10KΩ (±1% to ±5% tolerance)
Beta Value (B25/50): 3950K – 4500K (varies by model)
Operating Voltage: 3V – 5V (typically used with microcontrollers)
Power Dissipation: ≤100mW
Rs 50.00
Quick Info :
Wavelength Sensitivity : 850nm – 950nm (typically 940nm)
Operating Voltage : 2.7V – 5.5V
Current Consumption : ≤1.5mA (typical)
Reception Distance : 10m – 30m (varies by model)
Carrier Frequency : 30kHz – 56kHz
Rs 40.00
