-
USB2.0 TO TTL SERIAL 6PIN CONVERTER CH340G
Quick Info :
- Built-in USB to TTL Transfer chip.
- Designed to be used for USB to TTL electronic projects.
- TTL interface output. easy to connect to your MCU.
Rs 490.00 -
-
Voltmeter 0-200VDC
Quick info :
- Detection Voltage Range DC: 3.5-130V（max）
- Voltage Sampling Period : 300ms/ second
- Input Impedance : >100KΩ
- Working Current : <10mA
Rs 450.00Rs 500.00Voltmeter 0-200VDC
Rs 450.00Rs 500.00 -
W1209 Digital Temperature Controller Module
Quick Info :
- Temperature range: -50 -110°C
- Dimensions: 48.5 * 40mm
- Temperature control mode: ON / OFF
- Control accuracy: 0.1 °C
- Output voltage: DC 12V
Rs 750.00 -
W3001 220V Temperature Controller
Quick Info :
- Temperature measurement and programming range: -50°C …110°C
- Measurement accuracy: 0.1°C in the range from -9.9°C to 99.9°C; or 1.0°C outside this range
- Control accuracy: 0.1°C 0.1°C in the range -9.9°C to 99.9°C; or 1.0°C outside this range
- Hysteresis accuracy: 0.1°C
- Reading update time: 0.5 seconds
- Supply voltage, V: 110-220 AC
Rs 890.00W3001 220V Temperature Controller
Rs 890.00 -
W5100 Arduino Compatible Ethernet Shield
Quick Info :
- Operating voltage:5V (supplied from the Arduino Board)
- Ethernet Controller: W5500 with internal 32K buffer
- Connection speed: 10/100Mb
- Connection with Arduino on SPI port
Rs 4,390.00W5100 Arduino Compatible Ethernet Shield
Rs 4,390.00 -
XY-J02 Timer Module With Relay
Quick info :
- Operating voltage: 6 – 30V DC
- 1 Channel delay triggered relay module
- Delay time: 0.1 second to 999 minutes
Rs 590.00XY-J02 Timer Module With Relay
Rs 590.00 -
ZK-MT21 50W×2+100W Bluetooth 5.0 Amplifier Board
Quick info :
- Product model: ZK-MT21
- Bluetooth-compatible version: 5.0
- Input sensitivity: 500mV
- Input method: AUX+ Bluetooth-compatible
- Number of channels: 2.1 channels
- Power amplifier chip: Domestic power amplifier chip
- Adapter power supply: above DC12-24V/5A (24V battery pack is not allowed)
- Adapted speakers: 20-100W, 4-8Q
- Output power: left and right channels <50W; subwoofer <100W
Rs 4,500.00Rs 4,890.00ZK-MT21 50W×2+100W Bluetooth 5.0 Amplifier Board
Rs 4,500.00Rs 4,890.00 -
1 channel 5V DC OMRON Solid State Relay Module
Quick Info :
- Channels : 1
- Input release voltage: 3.5 to 5V
- Rated load voltage: 100V to 240V AC
- Load current: 0.10 to 2A
Rs 600.00 -
1.28-Inch Round LCD TFT Display GC9A01
Specification:
- Size: 1.28inch
- Resolution: 240 × 240
- Driving chip: GC9A01
- Interface method: SPI
- Color: Full-color RGB
Rs 2,190.001.28-Inch Round LCD TFT Display GC9A01
Rs 2,190.00 -
1.8 inch TFT Module 128X160 ST7735S
Quick info :
- Display Size: 1.8″
- Driver IC: ST7735
- Input Voltage (V): 3.3 to 5
- Pixel Resolution: 128 x 160
- Interface Type: SPI
Rs 1,490.001.8 inch TFT Module 128X160 ST7735S
Rs 1,490.00 -
125 kHz NFC USB RFID Card Reader
Quick info:
- Plug-and-Play: Easy setup with USB 2.0 interface
- Compatibility: ISO 14443 Type A/B, ISO 15693, and NFC cards
- Data Transfer speed: 106 kbps, 212 kbps, and 424 kbps
- Power Supply: 5V DC
Rs 2,100.00125 kHz NFC USB RFID Card Reader
Rs 2,100.00 -
125KHz EM4100 RFID Card Reader Module
Quick Info :
- Support Card Type: Read-only ID card (EM4100, IM4001)
- Support frequency: 125KHz
- Reader Time: <0.2s
- Read Range: 3-10cm
Rs 990.00125KHz EM4100 RFID Card Reader Module
Rs 990.00 -
12V Solenoid Lock
Quick Info
- Operating Voltage : 9 – 12 V (Preferred 12V)
- Case (L x W x H) : 53 x 40 x 28mm (2.1 x 1.6 x 1.1″)
- Latch (L x W) : 10 x 10mm (0.4 x 0.4″)
Rs 1,590.0012V Solenoid Lock
Rs 1,590.00 -
13.56MHz RFID Key Tag
Quick Info :
- Material: ABS
- Dimension(LxWxH): 43.7×30.5×5.3mm
- Response Frequency: 13.56MHz
- Chip type: FM1108 Fudan Chip
Rs 100.0013.56MHz RFID Key Tag
Rs 100.00 -
16 channel 5V DC Relay Module
Quick Info :
- 16 Channel
- Maximum switching voltage: 250VAC / 30VDC
- Maximum switching current: 10A
- Module operating voltage: 5V
Rs 2,950.0016 channel 5V DC Relay Module
Rs 2,950.00 -
2 channel 5V DC OMRON Solid State Relay Module
Quick Info :
- Channels : 2
- Input release voltage: 3.5 to 5V
- Rated load voltage: 100V to 240V AC
- Load current: 0.10 to 2A
Rs 1,150.002 channel 5V DC OMRON Solid State Relay Module
Rs 1,150.00 -
2.4 inch TFT LCD Shield 240 X 320 Touch
Quick Info :
- 240*320 pixels
- Suitable for an Uno (Atmega328P) or Mega (Atmega2560) based Arduinos (other chips are not supported)
- Dimensions: 72.5 mm x 53 mm
- Driver: ILI9320 or ILI9341 (or compatible with one of two)
Rs 2,250.002.4 inch TFT LCD Shield 240 X 320 Touch
Rs 2,250.00 -
4 channel 5V DC OMRON Solid State Relay Module
Quick Info :
- Channels : 4
- Input release voltage: 3.5 to 5V
- Rated load voltage: 100V to 240V AC
- Load current: 0.10 to 2A
Rs 1,600.004 channel 5V DC OMRON Solid State Relay Module
Rs 1,600.00 -
-
5A Overcurrent Protection Sensor Module with 12V Relay Switch
Quick info :
- Operating voltage: DC12V;
- Operating current: <20MA;
- Operating frequency range: 20Hz ~ 400Hz;
- Output mode: switch signal output;
- Maximum detection wire diameter: 5.2mm;
Rs 950.00 -
8 channel 5V DC Relay Module
Quick Info :
- Channel : 8
- Coil sensitivity = 5VDC
- Maximum Contact capacity = 250VAC/10VDC
- Maximum Current capacity = 10A
Rs 1,400.008 channel 5V DC Relay Module
Rs 1,400.00 -
Active GPS Patch Antenna (25*25)
Quick Info :
- Frequency – 1559Mhz-1609Mhz
- Active antenna noise figure < 1.5dB
- Cable – RF1.13
- Connector – I-PEX
Rs 650.00Active GPS Patch Antenna (25*25)
Rs 650.00 -
ADS1115 16 Bit ADC Module
Quick Info :
- WIDE SUPPLY RANGE: 2.0V to 5.5V
- PROGRAMMABLE DATA RATE: 8SPS to 860SPS
Rs 1,750.00ADS1115 16 Bit ADC Module
Rs 1,750.00 -
Arduino Compatible XD-204 Data Logger Shield
Quick Info :
- Real Time Clock Module : DS1307
- SD Card reader : standard SD card
- RTC battery included
Rs 690.00 -
AT24C256 I2C interface EEPROM Memory Module
Quick Info:
- Onboard chip AT24C256 chip
- Onboard the I2C communications required pull-up resistor
- All pins are leads and marked
- PCB board Dimensions : 36.5 (mm) x12 (mm)
Rs 390.00 -
Bluetooth XBee Shield V3 Module Wireless Control
Quick Info :
- Stackable design, easy to plug into the ARDUINO development board.
- Coupled with the Arduino Bluetooth Bee Bluetooth module, and other Bluetooth devices can communicate Wirelessly.
- Coupled with the XBee module, you can achieve two or more sets of communication between Arduino or Arduino and PC Communications.
Rs 750.00 -
Cascaded MAX7219 4 Way LED Dot Matrix Module
Quick Info :
- A single module can drive a total of 8 * 8 dot matrix overcast
- The module voltage: 5V
- Module Size: 12.8 cm (length) X 3.2 cm (width) X 1.3 cm (height)
Rs 1,650.00Cascaded MAX7219 4 Way LED Dot Matrix Module
Rs 1,650.00 -
-
DB9 Female Screw Terminal to RS232 RS485 Conversion Board
Quick Info :
- Perfect for experimentation and prototype work
- Brings all 9 pins of a DB9 connector to screw terminal blocks
- Adapter used for communication debug
- 9 pcs signal line was all lead out, name and number clearly labeled;
Rs 290.00 -
DC Power Adapter Board
Quick Info :
- Module Size: 2.8cm * 1.3cm
- Applicable connector: 5.5 * 2.1mm
- Power output interface: 2 channel VCC, 2 channel GND
- Net Weight: 3.2g
Rs 100.00DC Power Adapter Board
Rs 100.00 -
DS1302 Real Time Clock Module
Quick Info
- Supply voltage (typically): 3.3V
- Battery not included
- Battery : CR2032
Rs 790.00DS1302 Real Time Clock Module
Rs 790.00 -
DS3231 Real Time Clock Module
Quick Info :
- Operating voltage : 2.3V – 5.5V
- Battery not included
- Battery : CR2032
Rs 590.00DS3231 Real Time Clock Module
Rs 590.00 -
Electronic SCR 230V AC Voltage Regulator 2000W
Specifications :
- Input Voltage: 220V
- Maximum Power: 2000W
- Adjustable Voltage: 50V-220V
Rs 950.00Rs 1,250.00Electronic SCR 230V AC Voltage Regulator 2000W
Rs 950.00Rs 1,250.00