-
NRF24L01 2.4GHz Transceiver Adapter Base
Quick Info :
- It can be used with NRF24L01 wireless module
- Add core nRF24L01+ Breakout Adapter with onboard 3.3V Regulator
- Onboard 3.3V voltage regulator accepts your Arduino +5V supply and provides 3.3V for the attached nRF24L01+ module
- Allows for easy connection to nRF24L01+ modules
- Small power on SMD LED indicator
Rs 250.00NRF24L01 2.4GHz Transceiver Adapter Base
Rs 250.00 -
IRF520 MOSFET Driver Module
Quick Info :
- Voltage: 3.3V, 5V
- Output load voltage :0-24V
- Output load current: <5A (1A need to add more heat sink)
Rs 250.00IRF520 MOSFET Driver Module
Rs 250.00 -
TP5100 Lithium Cell Charging Module
Quick Info :
- Model: TP5100
- Input Supply voltage (V): 5 ~ 18
- Programmable charge current: 0.1 ~ 2 A.
Rs 250.00TP5100 Lithium Cell Charging Module
Rs 250.00 -
Aluminium Gear Motor Bracket 37GB
Quick Info :
- Type: Motor Mounting Bracket
- Material: Aluminium Alloy
- Compatibility: 37GB(GA) DC Motors
- Dimensions: 47x40x43mm
Rs 250.00Rs 290.00Aluminium Gear Motor Bracket 37GB
Rs 250.00Rs 290.00 -
1 channel 5V DC Relay Module with Optocoupler
Quick Info :
- Operating Voltage (Control): 5V DC
- Channels: 1 Channel
- Isolation: Optocoupler (Opto-Isolated)
- Max Switching Voltage (AC): 250V AC @ 10A
Rs 250.00Rs 350.001 channel 5V DC Relay Module with Optocoupler
Rs 250.00Rs 350.00 -
SMA Female to IPEX UFL With Cable
Quick Info :
- Length: 20cm
- Connectors: SMA Female to IPEX4/MHF4
- Compatible With: SIM800L, SIM900A, ESP32U
- Impedance: 50 Ohm
Rs 250.00Rs 300.00SMA Female to IPEX UFL With Cable
Rs 250.00Rs 300.00 -
0-100V DC Voltmeter
Quick Info :
- Working current: 20mA
- Operating voltage: 4-35 VDC
- Measurement rate: 200mS /Times
- Display Range : upto 100V
Rs 280.000-100V DC Voltmeter
Rs 280.00 -
NE555 Adjustable Pulse Frequency Duty Cycle Module Square Wave Signal Generator
Quick Info :
Main chip: NE555
Input Voltage (VCC): 5V-15VDC
Input current:~100MA
Output amplitude: 4.2V V-PP to 11.4V V-PP. (Varies with VCC voltage)Rs 280.00 -
Keypad Flexible 4 Keys
Quick Info :
- Arduino and Raspberry Pi compatible
- 4-key membrane switch pad has 5 pin female header on end of flat cable
- White sticker on back can be peeled off for adhesive mounting
Rs 285.00Keypad Flexible 4 Keys
Rs 285.00 -
TDA2030 Audio Amplifier Module
Quick Info :
- 18 W mono amplifier circuit design
- On-board 10K potentiometer for volume adjustment
- Operating Voltage Range: 6 V to 12 V
Rs 290.00TDA2030 Audio Amplifier Module
Rs 290.00 -
-
HX711 Load Cell Amplifier
Quick Info :
- Operation Voltage: 2.7V-5V
- Operation Current: < 1.5mA
- Sample rate: 10Hz
- Simultaneous 50 and 60Hz supply rejection
- Available Load Cells 5kg, 10kg or 20kg
Rs 290.00HX711 Load Cell Amplifier
Rs 290.00 -
Keypad Flexible 16 Keys
Quick Info :
- Arduino and Raspberry Pi compatible
- 16-key membrane switch pad has 8 pin female header on end of flat cable
- White sticker on back can be peeled off for adhesive mounting
Rs 290.00Keypad Flexible 16 Keys
Rs 290.00 -
Mini DC 3A Motor PWM Speed Controller
Quick Info :
- Operating Voltage: DC 4.5V-35V
- Control Power: 90W (maximum)
- Size: 30mm x 26mm x 14mm (Without Handle)
Rs 290.00Mini DC 3A Motor PWM Speed Controller
Rs 290.00 -
DB9 Female Screw Terminal to RS232 RS485 Conversion Board
Quick Info :
- Perfect for experimentation and prototype work
- Brings all 9 pins of a DB9 connector to screw terminal blocks
- Adapter used for communication debug
- 9 pcs signal line was all lead out, name and number clearly labeled;
Rs 290.00 -
Coin Cell Vibration Motor Module
Quick Info :
- Rated Voltage: 5.0VDC
- Operating Voltage: 3.0-6.0VDC
- Rated Speed: Minimum 9000 rpm
Rs 300.00Coin Cell Vibration Motor Module
Rs 300.00 -
PAM8403 Mini 5V Digital Amplifier Board
Quick Info :
- Maximum output power: 3W*2(5V 4Ω)
- Built with switch Potentiometer
Rs 320.00PAM8403 Mini 5V Digital Amplifier Board
Rs 320.00 -
-
Rs 350.00RGB SMD LED 8 Channel Module 5050 WS2812
Rs 350.00 -
Plastic Wheel + Gear Motor
Quick Info :
- Name: TT motor
- Type: 1:48
- Speed: 45±10%r/min 90±10%r/min
- Rated voltage: 3V/6V
Rs 350.00Plastic Wheel + Gear Motor
Rs 350.00 -
Micro SD card reader module
Quick Info:
- Control Interface: GND, VCC, MISO, MOSI, SCK, CS
- Size: 45 x 28mm
- Net weight: 6g
Rs 350.00Micro SD card reader module
Rs 350.00 -
SD Card Reader Module
Quick Info :
- All SD SPI pins output, MOSI, SCK, MISO, and CS.
- Support 5V/3.3V input.
- This module can handle 2GB SD cards.
Rs 350.00SD Card Reader Module
Rs 350.00 -
2 Channel 5V DC Relay Module
Quick Info :
- Channel : 2
- Coil sensitivity = 5VDC
- Maximum Contact capacity = 250VAC/10VDC
- Maximum Current capacity = 10A
Rs 350.00Rs 590.002 Channel 5V DC Relay Module
Rs 350.00Rs 590.00 -
MFRC522 RFID Reader Module
Quick Info :
- MFRC522 chip based board
- Operating frequency: 13.56MHz
- Supply Voltage: 3.3V
- Current: 13-26mA
Rs 360.00Rs 430.00MFRC522 RFID Reader Module
Rs 360.00Rs 430.00 -
RS232 Serial Port To TTL Converter Module
Quick Info :
- Chipset: MAX3232
- Working Voltage: 3.3V-5.5V
- Port: TX RX VCC GND
Rs 390.00 -
433Mhz Transmitter and Receiver
Quick Info :
- Transmitter Operating Voltage: +5V only
- Transmitter Operating current: 9mA to 40mA
- Operating frequency: 433 MHz
- Transmission Distance: 3 meters (without antenna) to 100 meters (maximum)
Rs 390.00433Mhz Transmitter and Receiver
Rs 390.00 -
15A 400W MOSFET Trigger Switch Drive Module
Quick Info :
- Operating Voltage: DC 5V – 36V;
- The trigger source: digital high-low (DC3.3V – 20V),
- Output capacity: DC 5V – 36V,
Rs 390.00 -
TP5000 Battery Charging Module
Quick info:
- Charges both Li-ion (4.2V) and LiFePO4 (3.6V) batteries
- Adjustable charging current: 0.5A to 2A (default 1A)
- Embedded switching regulator for efficient charging
- LED indicators: Red (charging), Green (complete)
- Multiple protection circuits: overcurrent, over-discharge, overvoltage
- Compact design with heat dissipation pad
- Easy voltage switching via F solder pad connection
Rs 390.00TP5000 Battery Charging Module
Rs 390.00 -
DFPlayer Mini MP3 Player Module
Quick Info :
- Type: MP3 Player Module
- Voltage: 3.2V-5V
- Storage: MicroSD Card
- Control: UART Serial
- Amplifier: 3W Mono
Rs 390.00Rs 450.00DFPlayer Mini MP3 Player Module
Rs 390.00Rs 450.00 -
74HC4067 16-Channel Analog Multiplexer Module
Quick Info :
- 16 bi-directional channels
- Can be used as multiplexer or demultiplexer
- Channels can handle analog or digital signals
Rs 400.00 -
Mini Motor Drive Shield Expansion Board L293D Module
Quick Info :
- Controls 2 DC motors or 1 stepper motor simultaneously
- Wide voltage range: 4.5V to 25V input supply
- 600mA continuous, 1.2A peak current per channel
- Built-in overtemperature and overcurrent protection
- PWM speed control and bidirectional rotation
- Direct compatibility with Arduino UNO/MEGA 2560
- Compact size: 40 x 35.5 x 12.5mm, weighs only 10g
Rs 400.00 -
USB to RS485 Converter Adapter
Quick Info :
- Fully compliant USB 2.0 standard, backward compatible with USB1.1
- Support System: Windows XP, Vista, Windows 7, Linux, MacOS, and WinCE5.0 drive
- Supports Plug, Play and hot-swap ( USB side) ;
Rs 450.00USB to RS485 Converter Adapter
Rs 450.00 -
PWM DC 6V – 28V 3A Motor Speed Controller
Quick Info :
- Input supply voltage: 6V-28VDC
- The maximum output power: 80W
- The maximum continuous output current : 3A
Rs 450.00 -
PAM8610 15Wx2 Stereo Audio Amplifier Board
Quick Info :
- Main Chip: PAM8610
- Power Range: DC 6V-15V (self-protection)
- Recommended Voltage: DC 12V(2A)
- Output Power: 10Wx2(8Ω) 15Wx2(4Ω)
Rs 450.00 -
915MHz Spring Antenna for RF95 LORA Module
Quick Info :
Frequency Range(MHz)：915MHz+/-5MHz
Connector Type ：solderingRs 450.00
