-
0-100V DC Voltmeter
Quick Info :
- Working current: 20mA
- Operating voltage: 4-35 VDC
- Measurement rate: 200mS /Times
- Display Range : upto 100V
Rs 290.000-100V DC Voltmeter
Rs 290.00 -
1.8 inch TFT Module 128X160 ST7735S
Quick info :
- Display Size: 1.8″
- Driver IC: ST7735
- Input Voltage (V): 3.3 to 5
- Pixel Resolution: 128 x 160
- Interface Type: SPI
Rs 1,490.001.8 inch TFT Module 128X160 ST7735S
Rs 1,490.00 -
Digital Voltmeter & Ammeter Dual Display
Quick Info :
- Size: 48mm x 29mm x 26mm.
- Display color: Red & Blue LED (dual display).
- Display: 0.28″ LED digital.
- Operating voltage: DC 4.5 ~ 30V.
- Measure voltage: DC 0 ~ 100V.
- Measure current: 10A (direct measurement, built-in shunt).
Rs 690.00Digital Voltmeter & Ammeter Dual Display
Rs 690.00 -
LCD 16X2 Character Module
Quick Info :
- Operating Voltage is 4.7V to 5.3V
- Current consumption is 1mA without backlight
- Alphanumeric LCD display module, meaning can display alphabets and numbers
- Consists of two rows and each row can print 16 characters.
- Compatible with LCD to I2C Adapter Board
Rs 460.00 – Rs 490.00LCD 16X2 Character Module
Rs 460.00 – Rs 490.00 -
LCD 16X4 Character Module
Quick Info :
- Operating Voltage is 4.7V to 5.3V
- Current consumption is 1mA without backlight
- Alphanumeric LCD display module, meaning can display alphabets and numbers
- Consists of four rows and each row can print 16 characters.
- Compatible with LCD to I2C Adapter Board
Rs 1,390.00LCD 16X4 Character Module
Rs 1,390.00 -
-
MAX7219 8 X 8 LED Dot Matrix Module
Quick Info :
- A single module can drive 8 by 8 common cathodes
- Module Operating voltage: 5V.
- Module size: 5 cm long X 3.2 cm wide X 1.5 cm high
- Module with input and output interfaces, supports multiple modules cascade
- Led colour:Red
Rs 800.00MAX7219 8 X 8 LED Dot Matrix Module
Rs 800.00 -
OLED 128X64 0.96 inch Display Module
Quick Info :
- OLED Driver IC: SSD1306
- Resolution: 128 x 64
- Visual Angle: >160°
- Input Voltage: 3.3V ~ 6V
- Compatible I/O Level: 3.3V, 5V
Rs 750.00Rs 990.00OLED 128X64 0.96 inch Display Module
Rs 750.00Rs 990.00 -
Voltmeter 0-200VDC
Quick info :
Detection Voltage Range DC: 3.5-130V（max）
Rs 450.00Rs 500.00Voltmeter 0-200VDC
Rs 450.00Rs 500.00 -
1.28-Inch Round LCD TFT Display GC9A01
Specification:
- Size: 1.28inch
- Resolution: 240 × 240
- Driving chip: GC9A01
- Interface method: SPI
- Color: Full-color RGB
Rs 2,190.001.28-Inch Round LCD TFT Display GC9A01
Rs 2,190.00 -
2.4 inch TFT LCD Shield 240 X 320 Touch
Quick Info :
- 240*320 pixels
- Suitable for an Uno (Atmega328P) or Mega (Atmega2560) based Arduinos (other chips are not supported)
- Dimensions: 72.5 mm x 53 mm
- Driver: ILI9320 or ILI9341 (or compatible with one of two)
Rs 2,250.002.4 inch TFT LCD Shield 240 X 320 Touch
Rs 2,250.00 -
Cascaded MAX7219 4 Way LED Dot Matrix Module
Quick Info :
- A single module can drive a total of 8 * 8 dot matrix overcast
- The module voltage: 5V
- Module Size: 12.8 cm (length) X 3.2 cm (width) X 1.3 cm (height)
Rs 1,650.00Cascaded MAX7219 4 Way LED Dot Matrix Module
Rs 1,650.00 -
-
LCD 16X2 Keypad Shield
Quick Info :
- Operating Voltage: 5V
- 5 Push buttons.
- Left, Right, Up, Down and Select buttons
- Screen contrast adjustment
- Arduino Reset button
Rs 595.00LCD 16X2 Keypad Shield
Rs 595.00 -
LCD 20×4 Character Module
Quick Info :
- Interface : I2C
- I2C Address : 0x3F
- Supply voltage : 5V
- Contrast Adjust : Through Potentiometer
- Backlight : Blue
Rs 1,100.00LCD 20×4 Character Module
Rs 1,100.00 -
LCD 20×4 Character Module with I2C Adapter
Quick Info :
- Interface : I2C
- I2C Address : 0x3F
- Supply voltage : 5V
- Contrast Adjust : Through Potentiometer
- Backlight : Blue
Rs 1,190.00LCD 20×4 Character Module with I2C Adapter
Rs 1,190.00 -
MAX7219 8 Way Display Module
Quick Info :
- Eight 7-Segment LED Displays with 0.36″ high red digits
- LED displays mounted in sockets
- Built-in MAX7219 LED Driver
- SPI 3-wire serial interface for easy hookup to MCU
- Can daisy-chain multiple modules together for larger displays
Rs 590.00MAX7219 8 Way Display Module
Rs 590.00 -
MAX7219 8 X 8 LED Dot Matrix Module V2
Quick Info :
- Single 8×8 LED Matrix Display with 1.3″ high bright red display
- Built-in MAX7219 LED Driver
- SPI 3-wire serial interface for easy hookup to MCU
Please note that the Jumper Cables need to be purchased separately
Rs 900.00MAX7219 8 X 8 LED Dot Matrix Module V2
Rs 900.00