Skip to content
Quick Info :
Dimensions : 31mm X 15mm X 5mm / 1.22 X 0.59 X 0.19 inch
Rs 100.00
Quick Info :
Fully compliant USB 2.0 standard, backward compatible with USB1.1
Support System: Windows XP, Vista, Windows 7, Linux, MacOS, and WinCE5.0 drive
Supports Plug, Play and hot-swap ( USB side) ;
Rs 450.00Rs 500.00
Quick Info:
Brand : Waveshare
Host Interface : USB Type-A
Device Interface : RS485 Screw Terminal
Baud Rate : 300bps – 921600bps
Transmission Distance : Up to 1200 metres
Power Supply : USB Bus Powered (5V)
OS Support : Windows / Linux / macOS
Direction Control : Automatic
Rs 3,250.00Rs 3,550.00
Quick Info :
FT232RL+75176 chipset for stable communication
Automatic data flow control – no manual DE/RE control
Supports up to 32 devices on RS485 bus network
Wide baud rate: 300-921600bps with auto-detection
Switchable RS485/TTL modes via 4 jumpers
TVS protection and USB self-recovery features
Self-powered from USB – no external power needed
Rs 950.00
Quick Info :
Standard USB type A male and TTL 5 pin connector.
5 pins for 3.3V, TXD, RXD, GND & 5V.
Baud rates: 300 bps to 1.5 Mbps
Rs 790.00Rs 850.00
Quick Info :
Connector Type : USB Type B Female Socket
Breakout Pins : VBUS, D+, D-, GND
Pin Pitch : 2.54mm
Mounting Style : DIP / Through-Hole
Rs 100.00
Quick Info :
Connector : USB Type-C
Output Type : DIP 2.54 mm
Use Case : Breadboard & PCB Prototyping
Material : FR-4 PCB
Rs 120.00Rs 250.00
Quick Info :
Total Resistance : 10KΩ
Wiper Tap Positions : 100
Step Resolution : ~101Ω per Step
Operating Voltage : 3V – 5V DC
Memory Type : Non-Volatile
Rs 640.00Rs 750.00
Quick Info :
Type: External TV Tuner Box
Connectivity: VGA
Features: PIP function, FM Radio, Built-in Speaker
Compatibility: LCD, LED, and CRT monitors
Rs 6,250.00
Quick Info :
Compatible: ESP-01, ESP-07, ESP-12, ESP32
Interface: USB to Serial (CH340/CP2102)
Power: 3.3V regulated output
Features: Auto-reset, GPIO breakout, boot mode switches
Programming: Arduino IDE, ESP-IDF, MicroPython
Use: ESP development, testing, firmware flashing, IoT projects
Rs 1,350.00Rs 1,450.00
Quick Info :
Type: 44-pin expansion breakout board
Compatible: ESP32-S3 development boards
Terminals: Screw terminal blocks (1→2 expansion)
Spacing: 25.4mm (44-pin)
Size: 80mm x 58mm
No Soldering Required
Rs 850.00Rs 950.00
Quick Info :
Duplicates one HDMI source to 4 displays
Supports resolutions up to 1080p – high definition
Easy installation; plug and play
1 HDMI female input to 4 HDMI female output
Rs 2,990.00
Quick Info :
IC : HX711 (24-bit delta-sigma ADC)
Input Channels : 2 differential (Ch. A & Ch. B)
Programmable Gain : 32 / 64 / 128
Output Data Rate : 10 SPS / 80 SPS (selectable)
Operating Voltage : 2.7V – 5V DC
Operating Current : < 1.5mA
Interface : 2-wire (SCK + DT)
Operating Temp : -20°C to +85°C
Compatible Boards : Arduino / ESP32 / Raspberry Pi / STM32
Rs 240.00Rs 290.00
Quick Info :
Chip: PCF8574T
Interface: I2C (SDA/SCL)
IO Pins: 8-bit expandable
Voltage: 5V
Address: Configurable (0x20-0x27)
Max Modules: 8 per I2C bus
Features: Onboard DIP switches
Rs 280.00Rs 300.00
Quick Info :
IC : SN65HVD230
Operating Voltage : 3.3V
Data Rate : Up to 1 Mbps
Standard Compliance : ISO 11898-2
ESD Protection : 16kV HBM (bus pins)
Rs 550.00Rs 690.00
Quick Info :
1-to-8 Bidirectional Translating Switches.
Supports Hot Insertion.
Low Standby Current.
1-to-8 Bidirectional Translating Switches.
Rs 490.00
