Converter
Interface converters: logic level shifters, USB to TTL and RS485 adapters, CAN modules, ADC and DAC boards, I2C multiplexers and breakout adapters.
-
QFP100 to DIP100 Adapter Programming Socket
Quick Info :
- Type: QFP to DIP Adapter Socket
- Package: QFP100/TQFP100/LQFP100
- Pin Pitch: 0.5mm
- IC Size: 14×14mm body
- Output: DIP100 (2.54mm pitch)
Rs 7,500.00Rs 7,900.00QFP100 to DIP100 Adapter Programming Socket
Rs 7,500.00Rs 7,900.00 -
PICkit3 PIC Programmer Debugger with Adapter
Quick Info:
- Interface : USB (Full Speed)
- Programming Protocol : ICSP
- Supported Devices : PIC10/12/16/18/24, dsPIC
- Included Accessory : ICSP Adapter Board
Rs 5,650.00Rs 6,250.00PICkit3 PIC Programmer Debugger with Adapter
Rs 5,650.00Rs 6,250.00 -
Power Line Communication Module KQ330
Quick Info :
- Type: Power Line Communication Module
- Data Rate: ~10kbps
- Carrier Frequency: 120 kHz
- Operating Voltage: 230V AC
Rs 3,950.00Rs 4,350.00Power Line Communication Module KQ330
Rs 3,950.00Rs 4,350.00 -
USB to RS485 Converter Module Waveshare vB
Quick Info:
- Brand : Waveshare
- Host Interface : USB Type-A
- Device Interface : RS485 Screw Terminal
- Baud Rate : 300bps – 921600bps
- Transmission Distance : Up to 1200 metres
- Power Supply : USB Bus Powered (5V)
- OS Support : Windows / Linux / macOS
- Direction Control : Automatic
Rs 3,250.00Rs 3,550.00USB to RS485 Converter Module Waveshare vB
Rs 3,250.00Rs 3,550.00 -
CH341B EEPROM Programmer Kit 3.3V/5V
Quick Info:
- Programmer IC : CH341B
- Supported Voltage : 1.8V / 3.3V / 5V
- Supported Chips : 24Cxx / 25Cxx EEPROM
- Clip : SOIC8 / SOP8 Test Clip
- Adapter : SOP8 to DIP8 Converter
- Interface : USB
Rs 2,850.00CH341B EEPROM Programmer Kit 3.3V/5V
Rs 2,850.00 -
PIC K150 USB Microcontroller Programmer
Quick Info:
- Interface : USB
- Programming Socket : 40-pin DIP (ZIF)
- Supported Chips : PIC10 / PIC12 / PIC16 / PIC18
- Power Source : USB (no external supply)
Rs 2,550.00Rs 2,900.00PIC K150 USB Microcontroller Programmer
Rs 2,550.00Rs 2,900.00 -
MEGA2560 Prototype Screw Terminal Shield Kit
Quick Info:
- Compatibility : Arduino Mega 2560 R3
- PCB Type : Double-Sided FR-4
- Terminal Block Pins : 84 Total
- Wire Range : 26–16 AWG
Rs 1,950.00Rs 2,100.00MEGA2560 Prototype Screw Terminal Shield Kit
Rs 1,950.00Rs 2,100.00 -
USB 2.0 to RS232 Serial Converter Cable
Quick Info:
- PC Interface : USB 2.0 Type-A Male
- Device Interface : DB9 Male (RS232)
- Data Transfer Rate : Up to 921.6Kbps
- OS Support : Windows / macOS / Linux
- Cable Length : Approximately 1 metre
- Bus Powered : Yes (5V USB)
- Plug and Play : Yes
Rs 1,580.00Rs 1,700.00USB 2.0 to RS232 Serial Converter Cable
Rs 1,580.00Rs 1,700.00 -
MCP23017 16 Bit I2C/SPI IO Expander Module
Quick Info:
- Chip : MCP23017 / MCP23S17
- IO Pins : 16 (Bidirectional)
- Interface : I2C / SPI
- SPI Speed : Up to 10MHz
- Operating Voltage : 1.8V to 5.5V
Rs 1,550.00Rs 1,800.00MCP23017 16 Bit I2C/SPI IO Expander Module
Rs 1,550.00Rs 1,800.00 -
PC817 Optocoupler Isolation Board 3.6-30V
Quick Info:
- Optocoupler Type : PC817
- Drive Signal Voltage : 3.6V – 24V
- Output Voltage Range : 3.6V – 30V
- Output Logic : Jumper Configurable
Price range: Rs 350.00 through Rs 950.00 -
RJ45 Ethernet Female to 8 Pin Screw Terminal Adapter
Quick Info :
- Type: RJ45 Female to 8-Pin Terminal
- Pins: 8
- Compatible Cables: Cat5 / Cat6
- Material: Plastic
- Voltage: ≤50 V
Rs 950.00Rs 1,150.00RJ45 Ethernet Female to 8 Pin Screw Terminal Adapter
Rs 950.00Rs 1,150.00 -
USB to RS485/TTL Serial Converter Adapter FT232
Quick Info :
- FT232RL+75176 chipset for stable communication
- Automatic data flow control – no manual DE/RE control
- Supports up to 32 devices on RS485 bus network
- Wide baud rate: 300-921600bps with auto-detection
- Switchable RS485/TTL modes via 4 jumpers
- TVS protection and USB self-recovery features
- Self-powered from USB – no external power needed
Rs 950.00 -
CAN Module MCP2515 with TJA1050
Quick Info :
- CAN Controller : MCP2515
- CAN Transceiver : TJA1050
- Operating Voltage: 5V
- Interface: SPI
Rs 950.00Rs 1,250.00CAN Module MCP2515 with TJA1050
Rs 950.00Rs 1,250.00 -
USB 3.0 Card Reader SD/TF
Quick Info:
- Interface : USB 3.0
- Supported Cards : SD, TF (MicroSD)
- Transfer Speed : Up to 5 Gbps
- Compatibility : Windows, macOS, Linux
- Driver Required : No (Plug and Play)
- Power : Bus Powered via USB
Rs 850.00Rs 950.00USB 3.0 Card Reader SD/TF
Rs 850.00Rs 950.00 -
PCM5102 DAC I2S Interface Decoder
Quick Info :
- Chip: PCM5102
- Resolution: Up to 32-bit/384kHz
- Interface: I2S
- Power: 3.3 V – 5 V DC
Rs 850.00Rs 1,050.00PCM5102 DAC I2S Interface Decoder
Rs 850.00Rs 1,050.00 -
-
USB to TTL Converter CP2102 (5 Pin)
Quick Info :
- Standard USB type A male and TTL 5 pin connector.
- 5 pins for 3.3V, TXD, RXD, GND & 5V.
- Baud rates: 300 bps to 1.5 Mbps
Rs 790.00Rs 850.00USB to TTL Converter CP2102 (5 Pin)
Rs 790.00Rs 850.00 -
ESP32 Expansion Breakout Board
Quick Info :
- Compatibility: 30-pin & 38-pin ESP32 boards
- Terminals: Screw terminal blocks (3.81mm pitch)
- Power: No onboard regulation (uses ESP32 power)
- Wire Support: 22-28 AWG
- Size: ~75mm x 55mm
- Assembly: Plug-and-play design
- Mounting: 4 mounting holes included
Rs 750.00Rs 850.00ESP32 Expansion Breakout Board
Rs 750.00Rs 850.00
Modules that let two different systems talk to each other: bi-directional 5V to 3.3V logic level converters, USB to TTL serial adapters (FT232RL, CP2102, CH340G), MAX485 and USB to RS485 converters, CAN modules (MCP2515, SN65HVD230), ADS1115 and HX711 analog-to-digital converters, the TCA9548A I2C multiplexer and SOIC, USB and ESP32 breakout boards.
Which converter do I need?
To program a board that has no USB port, or to read a serial device on a PC, use a USB to TTL converter. To connect a 5V sensor to a 3.3V ESP32 or Raspberry Pi, use a logic level converter. For long cable runs between devices, RS485 or CAN is far more reliable than plain serial. To read precise analog values, add an ADC module.