Converter
Interface converters: logic level shifters, USB to TTL and RS485 adapters, CAN modules, ADC and DAC boards, I2C multiplexers and breakout adapters.
-
74HC4067 16-Channel Analog Multiplexer Module
Quick Info :
- 16 bi-directional channels
- Can be used as multiplexer or demultiplexer
- Channels can handle analog or digital signals
Rs 400.00 -
ADS1115 16 Bit ADC Module
Quick Info :
- WIDE SUPPLY RANGE: 2.0V to 5.5V
- PROGRAMMABLE DATA RATE: 8SPS to 860SPS
Rs 650.00Rs 950.00ADS1115 16 Bit ADC Module
Rs 650.00Rs 950.00 -
ADUM1201 Magnetic Isolator Module CJMCU-1201
Quick Info:
- Chip : ADUM1201
- Channels : 2 (Bidirectional)
- Data Rate : DC to 25Mbps
- Isolation Voltage : 2500Vrms
Rs 490.00Rs 550.00ADUM1201 Magnetic Isolator Module CJMCU-1201
Rs 490.00Rs 550.00 -
CAN Module MCP2515 with TJA1050
Quick Info :
- CAN Controller : MCP2515
- CAN Transceiver : TJA1050
- Operating Voltage: 5V
- Interface: SPI
Rs 950.00Rs 1,250.00CAN Module MCP2515 with TJA1050
Rs 950.00Rs 1,250.00 -
CH341B EEPROM Programmer Kit 3.3V/5V
Quick Info:
- Programmer IC : CH341B
- Supported Voltage : 1.8V / 3.3V / 5V
- Supported Chips : 24Cxx / 25Cxx EEPROM
- Clip : SOIC8 / SOP8 Test Clip
- Adapter : SOP8 to DIP8 Converter
- Interface : USB
Rs 2,850.00CH341B EEPROM Programmer Kit 3.3V/5V
Rs 2,850.00 -
DB9 Female Screw Terminal to RS232 RS485 Conversion Board
Quick Info :
- Perfect for experimentation and prototype work
- Brings all 9 pins of a DB9 connector to screw terminal blocks
- Adapter used for communication debug
- 9 pcs signal line was all lead out, name and number clearly labeled;
Rs 290.00 -
DB9 Male Screw Terminal to RS232 RS485 Conversion Board
Quick Info :
- Type: DB9 Male Connector Breakout Board
- Terminals: 9 screw terminals (labeled)
- Standards: RS232, RS485, RS422 compatible
- Wire: 16-26 AWG
- Use: Serial communication, PLC, industrial automation, testing
Rs 290.00Rs 350.00DB9 Male Screw Terminal to RS232 RS485 Conversion Board
Rs 290.00Rs 350.00 -
DC Power Adapter Board
Quick Info :
- Module Size: 2.8cm * 1.3cm
- Applicable connector: 5.5 * 2.1mm
- Power output interface: 2 channel VCC, 2 channel GND
- Net Weight: 3.2g
Rs 100.00DC Power Adapter Board
Rs 100.00 -
DVI to HDMI Converter Adapter Module
Quick Info :
- Type: DVI-D ↔ HDMI passive adapter
- Direction: Bidirectional
- Resolution: Up to 1080p Full HD
- Audio: Not supported
- Power: None required (passive)
- Compatible: PC, Raspberry Pi, monitors, projectors
- Signal: Digital video only
Rs 550.00Rs 650.00DVI to HDMI Converter Adapter Module
Rs 550.00Rs 650.00 -
ESP32 Expansion Breakout Board
Quick Info :
- Compatibility: 30-pin & 38-pin ESP32 boards
- Terminals: Screw terminal blocks (3.81mm pitch)
- Power: No onboard regulation (uses ESP32 power)
- Wire Support: 22-28 AWG
- Size: ~75mm x 55mm
- Assembly: Plug-and-play design
- Mounting: 4 mounting holes included
Rs 750.00Rs 850.00ESP32 Expansion Breakout Board
Rs 750.00Rs 850.00 -
FT232RL USB to TTL Converter
Quick Info :
- Data transfer rates from 300 baud to 3 Mbaud (RS422, RS485, RS232) at TTL levels.
- Integrated +3.3V level converter for USB I/O
- Integrated level converter on UART and CBUS for interfacing to between +1.8V and +5V logic.
Rs 400.00Rs 590.00FT232RL USB to TTL Converter
Rs 400.00Rs 590.00 -
Logic Level Converter Bi-Directional Module 5V to 3.3V
Quick Info :
- 4 channels can convert up to 4 logic signals
- Can convert between 1.8V, 2.8V, 3.3V and 5V logic circuits
- Bi-directional so can work with bi-directional buses such as I2C
- Utilizes N-Ch MOSFET transistors for level translation
Rs 100.00Rs 150.00Logic Level Converter Bi-Directional Module 5V to 3.3V
Rs 100.00Rs 150.00 -
Logic Level Converter Bi-Directional Module 8 Channel
Quick Info :
- Type: Bi-Directional Level Shifter
- Channels: 8 Independent
- Voltage: 5V ↔ 3.3V
- Speed: Up to 400kHz
- Applications: I2C, SPI, UART, GPIO
Rs 320.00Rs 450.00Logic Level Converter Bi-Directional Module 8 Channel
Rs 320.00Rs 450.00 -
MAX485 RS485 to TTL Converter Module
Quick Info :
- IC Chipset : MAX485
- Operating Voltage : 5V DC
- Communication Standard : RS-485 (EIA-485)
- Max Nodes on Bus : 32 Transceivers
- Max Communication Distance : Up to 1200m
Rs 200.00Rs 220.00MAX485 RS485 to TTL Converter Module
Rs 200.00Rs 220.00 -
MCP23017 16 Bit I2C/SPI IO Expander Module
Quick Info:
- Chip : MCP23017 / MCP23S17
- IO Pins : 16 (Bidirectional)
- Interface : I2C / SPI
- SPI Speed : Up to 10MHz
- Operating Voltage : 1.8V to 5.5V
Rs 1,550.00Rs 1,800.00MCP23017 16 Bit I2C/SPI IO Expander Module
Rs 1,550.00Rs 1,800.00 -
MCP4725 12-Bit I2C DAC Module with EEPROM
Quick Info :
- Resolution: 12-bit (4096 steps)
- Interface: I²C
- Key Feature: Internal EEPROM
- Voltage Range: 2.7V – 5.5V
- Use: Analog Signal Generation
Rs 450.00Rs 490.00MCP4725 12-Bit I2C DAC Module with EEPROM
Rs 450.00Rs 490.00 -
MEGA2560 Prototype Screw Terminal Shield Kit
Quick Info:
- Compatibility : Arduino Mega 2560 R3
- PCB Type : Double-Sided FR-4
- Terminal Block Pins : 84 Total
- Wire Range : 26–16 AWG
Rs 1,950.00Rs 2,100.00MEGA2560 Prototype Screw Terminal Shield Kit
Rs 1,950.00Rs 2,100.00 -
Micro USB to DIP Converter Module
Quick Info :
- USB Type : Micro USB
- Header : 2.54mm
- Material : Plastic
- Size(L*W) : Approx. 26.06 x 22.93mm
Rs 60.00Micro USB to DIP Converter Module
Rs 60.00
Modules that let two different systems talk to each other: bi-directional 5V to 3.3V logic level converters, USB to TTL serial adapters (FT232RL, CP2102, CH340G), MAX485 and USB to RS485 converters, CAN modules (MCP2515, SN65HVD230), ADS1115 and HX711 analog-to-digital converters, the TCA9548A I2C multiplexer and SOIC, USB and ESP32 breakout boards.
Which converter do I need?
To program a board that has no USB port, or to read a serial device on a PC, use a USB to TTL converter. To connect a 5V sensor to a 3.3V ESP32 or Raspberry Pi, use a logic level converter. For long cable runs between devices, RS485 or CAN is far more reliable than plain serial. To read precise analog values, add an ADC module.