Skip to content
Quick Info :
IC Chipset : MAX485
Operating Voltage : 5V DC
Communication Standard : RS-485 (EIA-485)
Max Nodes on Bus : 32 Transceivers
Max Communication Distance : Up to 1200m
Rs 200.00Rs 220.00
Quick Info :
Interface : RS232 (DB9 female) to TTL
Interface Chip : MAX3232
Supply Voltage : 3.3V to 5V DC
Baud Rate : 300 to 115200 bps
TTL Connection : 4-pin header
Rs 390.00
Quick Info :
Fully compliant USB 2.0 standard, backward compatible with USB1.1
Support System: Windows XP, Vista, Windows 7, Linux, MacOS, and WinCE5.0 drive
Supports Plug, Play and hot-swap ( USB side) ;
Rs 450.00Rs 500.00
Quick Info :
Total Resistance : 10KΩ
Wiper Tap Positions : 100
Step Resolution : ~101Ω per Step
Operating Voltage : 3V – 5V DC
Memory Type : Non-Volatile
Rs 640.00Rs 750.00
Quick Info :
Standard USB type A male and TTL 5 pin connector.
5 pins for 3.3V, TXD, RXD, GND & 5V.
Baud rates: 300 bps to 1.5 Mbps
Rs 790.00Rs 850.00
Quick Info :
Data transfer rates from 300 baud to 3 Mbaud (RS422, RS485, RS232) at TTL levels.
Integrated +3.3V level converter for USB I/O
Integrated level converter on UART and CBUS for interfacing to between +1.8V and +5V logic.
Rs 400.00Rs 590.00
Quick Info :
4 channels can convert up to 4 logic signals
Can convert between 1.8V, 2.8V, 3.3V and 5V logic circuits
Bi-directional so can work with bi-directional buses such as I2C
Utilizes N-Ch MOSFET transistors for level translation
Rs 100.00Rs 150.00
Quick Info :
Chip: PCF8574T
Interface: I2C (SDA/SCL)
IO Pins: 8-bit expandable
Voltage: 5V
Address: Configurable (0x20-0x27)
Max Modules: 8 per I2C bus
Features: Onboard DIP switches
Rs 280.00Rs 300.00
Quick Info :
Compatible: ESP-01, ESP-07, ESP-12, ESP32
Interface: USB to Serial (CH340/CP2102)
Power: 3.3V regulated output
Features: Auto-reset, GPIO breakout, boot mode switches
Programming: Arduino IDE, ESP-IDF, MicroPython
Use: ESP development, testing, firmware flashing, IoT projects
Rs 1,350.00Rs 1,450.00
Quick Info :
Type: 44-pin expansion breakout board
Compatible: ESP32-S3 development boards
Terminals: Screw terminal blocks (1→2 expansion)
Spacing: 25.4mm (44-pin)
Size: 80mm x 58mm
No Soldering Required
Rs 850.00Rs 950.00
Quick Info :
Type: External TV Tuner Box
Connectivity: VGA
Features: PIP function, FM Radio, Built-in Speaker
Compatibility: LCD, LED, and CRT monitors
Rs 6,250.00
Quick Info :
MAX485 chip-based for reliable RS485 communication
Compatible with 3.3V and 5V power supplies
Built-in 120-ohm termination resistor (jumper selectable)
RX/TX LED indicators for signal monitoring
Rs 230.00
Quick Info :
IC : SN65HVD230
Operating Voltage : 3.3V
Data Rate : Up to 1 Mbps
Standard Compliance : ISO 11898-2
ESD Protection : 16kV HBM (bus pins)
Rs 550.00Rs 690.00
Quick Info:
Lightweight and portable design
Quality USB 3.1 Type-C to HDMI 1080p adapter
A perfect companion for MacBook and other type-c output devices to stream clear audio and video.
Aluminum surface, ensures better heat dispersion, generating less heat
Rs 2,590.00
Quick Info:
·Supports resolution up to 1920*1440 @ 60 Hz.
Supports up to 250MHz bandwidth.
Long distance transmission up to 30m.
Supports VGA, SVGA, UXGA, WUXGA, and multisync.
Rs 3,390.00
