Quick Info :
Type: DVI-D ↔ HDMI passive adapter
Direction: Bidirectional
Resolution: Up to 1080p Full HD
Audio: Not supported
Power: None required (passive)
Compatible: PC, Raspberry Pi, monitors, projectors
Signal: Digital video only
Rs 550.00Rs 650.00
Quick Info :
Input: SSOP-16 / SOP-16 SMD packages
Output: DIP-16 (2.54mm pitch)
SSOP Pitch: 0.635mm
SOP Pitch: 1.27mm
PCB: FR4, 1.6mm thickness
Compatible: Breadboards, DIP sockets
Use: SMD to through-hole conversion
Rs 50.00Rs 80.00
Quick Info :
Chip: PCF8574T
Interface: I2C (SDA/SCL)
IO Pins: 8-bit expandable
Voltage: 5V
Address: Configurable (0x20-0x27)
Max Modules: 8 per I2C bus
Features: Onboard DIP switches
Rs 280.00Rs 300.00
Quick Info :
Type: QFP to DIP Adapter Socket
Package: QFP100/TQFP100/LQFP100
Pin Pitch: 0.5mm
IC Size: 14×14mm body
Output: DIP100 (2.54mm pitch)
Rs 7,500.00Rs 7,900.00
Quick Info :
Type: Bi-Directional Level Shifter
Channels: 8 Independent
Voltage: 5V ↔ 3.3V
Speed: Up to 400kHz
Applications: I2C, SPI, UART, GPIO
Rs 320.00Rs 450.00
Quick Info :
Connector : USB Type-C
Output Type : DIP 2.54 mm
Use Case : Breadboard & PCB Prototyping
Material : FR-4 PCB
Rs 140.00Rs 250.00
Quick Info :
Type: DB9 Male Connector Breakout Board
Terminals: 9 screw terminals (labeled)
Standards: RS232, RS485, RS422 compatible
Wire: 16-26 AWG
Use: Serial communication, PLC, industrial automation, testing
Rs 290.00Rs 350.00
Quick Info :
Compatible: ESP-01, ESP-07, ESP-12, ESP32
Interface: USB to Serial (CH340/CP2102)
Power: 3.3V regulated output
Features: Auto-reset, GPIO breakout, boot mode switches
Programming: Arduino IDE, ESP-IDF, MicroPython
Use: ESP development, testing, firmware flashing, IoT projects
Rs 1,350.00Rs 1,450.00
Quick Info :
Chip: PCM5102
Resolution: Up to 32-bit/384kHz
Interface: I2S
Power: 3.3 V – 5 V DC
Rs 850.00Rs 1,050.00
Quick Info :
Type: RJ45 Female to 8-Pin Terminal
Pins: 8
Compatible Cables: Cat5 / Cat6
Material: Plastic
Voltage: ≤50 V
Rs 950.00Rs 1,150.00
Quick Info :
Type: 44-pin expansion breakout board
Compatible: ESP32-S3 development boards
Terminals: Screw terminal blocks (1→2 expansion)
Spacing: 25.4mm (44-pin)
Size: 80mm x 58mm
No Soldering Required
Rs 850.00Rs 950.00
Quick Info :
Resolution: 12 -bit (4096 steps)
Interface: I²C
Key Feature: Internal EEPROM
Voltage Range: 2.7V – 5.5 V
Use: Analog Signal Generation
Rs 450.00Rs 490.00
Quick Info :
Type: Power Line Communication Module
Data Rate: ~10kbps
Carrier Frequency: 120 kHz
Operating Voltage: 230V AC
Rs 3,500.00Rs 3,900.00
Quick Info :
Type: External TV Tuner Box
Connectivity: VGA
Features: PIP function, FM Radio, Built-in Speaker
Compatibility: LCD, LED, and CRT monitors
Rs 6,250.00
Quick Info :
FT232RL+75176 chipset for stable communication
Automatic data flow control – no manual DE/RE control
Supports up to 32 devices on RS485 bus network
Wide baud rate: 300-921600bps with auto-detection
Switchable RS485/TTL modes via 4 jumpers
TVS protection and USB self-recovery features
Self-powered from USB – no external power needed
Rs 950.00
Quick Info :
MAX485 chip-based for reliable RS485 communication
Compatible with 3.3V and 5V power supplies
Built-in 120-ohm termination resistor (jumper selectable)
RX/TX LED indicators for signal monitoring
Rs 230.00
Quick Info :
16 bi-directional channels
Can be used as multiplexer or demultiplexer
Channels can handle analog or digital signals
Rs 400.00
Quick Info :
CAN Controller : MCP2515
CAN Transceiver : TJA1050
Operating Voltage: 5V
Interface: SPI
Rs 950.00Rs 1,250.00
