Skip to content
Quick Info :
Interface : RS232 (DB9 female) to TTL
Interface Chip : MAX3232
Supply Voltage : 3.3V to 5V DC
Baud Rate : 300 to 115200 bps
TTL Connection : 4-pin header
Rs 390.00
Quick Info :
Data transfer rates from 300 baud to 3 Mbaud (RS422, RS485, RS232) at TTL levels.
Integrated +3.3V level converter for USB I/O
Integrated level converter on UART and CBUS for interfacing to between +1.8V and +5V logic.
Rs 400.00Rs 590.00
Quick Info :
16 bi-directional channels
Can be used as multiplexer or demultiplexer
Channels can handle analog or digital signals
Rs 400.00
Quick Info :
Fully compliant USB 2.0 standard, backward compatible with USB1.1
Support System: Windows XP, Vista, Windows 7, Linux, MacOS, and WinCE5.0 drive
Supports Plug, Play and hot-swap ( USB side) ;
Rs 450.00Rs 500.00
Quick Info :
Resolution: 12 -bit (4096 steps)
Interface: I²C
Key Feature: Internal EEPROM
Voltage Range: 2.7V – 5.5 V
Use: Analog Signal Generation
Rs 450.00Rs 490.00
Quick Info:
Chip : ADUM1201
Channels : 2 (Bidirectional)
Data Rate : DC to 25Mbps
Isolation Voltage : 2500Vrms
Rs 490.00Rs 550.00
Quick Info :
Type: DVI-D ↔ HDMI passive adapter
Direction: Bidirectional
Resolution: Up to 1080p Full HD
Audio: Not supported
Power: None required (passive)
Compatible: PC, Raspberry Pi, monitors, projectors
Signal: Digital video only
Rs 550.00Rs 650.00
Quick Info :
Total Resistance : 10KΩ
Wiper Tap Positions : 100
Step Resolution : ~101Ω per Step
Operating Voltage : 3V – 5V DC
Memory Type : Non-Volatile
Rs 640.00Rs 750.00
Quick Info :
WIDE SUPPLY RANGE: 2.0V to 5.5V
PROGRAMMABLE DATA RATE: 8SPS to 860SPS
Rs 650.00Rs 950.00
Quick Info:
Compatible MCUs : STM8 & STM32 Series
Protocols : SWIM, SWD, JTAG
Host Interface : USB 2.0 Type-A
Power Supply : Bus-Powered via USB
Compatible IDEs : STM32CubeIDE, Keil, IAR
Operating System : Windows, Linux, macOS
Rs 690.00Rs 725.00
Quick Info :
Compatibility: 30-pin & 38-pin ESP32 boards
Terminals: Screw terminal blocks (3.81mm pitch)
Power: No onboard regulation (uses ESP32 power)
Wire Support: 22-28 AWG
Size: ~75mm x 55mm
Assembly: Plug-and-play design
Mounting: 4 mounting holes included
Rs 750.00Rs 850.00
Quick Info :
Standard USB type A male and TTL 5 pin connector.
5 pins for 3.3V, TXD, RXD, GND & 5V.
Baud rates: 300 bps to 1.5 Mbps
Rs 790.00Rs 850.00
Quick Info :
Chip: PCM5102
Resolution: Up to 32-bit/384kHz
Interface: I2S
Power: 3.3 V – 5 V DC
Rs 850.00Rs 1,050.00
Quick Info:
Interface : USB 3.0
Supported Cards : SD, TF (MicroSD)
Transfer Speed : Up to 5 Gbps
Compatibility : Windows, macOS, Linux
Driver Required : No (Plug and Play)
Power : Bus Powered via USB
Rs 850.00Rs 950.00
Quick Info :
CAN Controller : MCP2515
CAN Transceiver : TJA1050
Operating Voltage: 5V
Interface: SPI
Rs 950.00Rs 1,250.00
Quick Info :
FT232RL+75176 chipset for stable communication
Automatic data flow control – no manual DE/RE control
Supports up to 32 devices on RS485 bus network
Wide baud rate: 300-921600bps with auto-detection
Switchable RS485/TTL modes via 4 jumpers
TVS protection and USB self-recovery features
Self-powered from USB – no external power needed
Rs 950.00
