-
Hot Glue Gun 60W 60 Watt
Quick Info :
- Voltage : 110-220v
- Glue stick size: 11mm (Large)
- On/Off Switch
Rs 1,190.00Hot Glue Gun 60W 60 Watt
Rs 1,190.00 -
-
-
HX711 Load Cell Amplifier
Quick Info :
- Operation Voltage: 2.7V-5V
- Operation Current: < 1.5mA
- Sample rate: 10Hz
- Simultaneous 50 and 60Hz supply rejection
- Available Load Cells 5kg, 10kg or 20kg
Rs 290.00HX711 Load Cell Amplifier
Rs 290.00 -
IC Base 14 pin DIP
Quick Info :
- Type : Dual In-Line Package (DIP) Socket
- Number of Pins : 14
- Body : High-quality thermoplastic
- Pin Pitch : 2.54mm
- Current Rating : ~1A per pin
- Voltage Rating : ~300V AC/DC
Rs 15.00IC Base 14 pin DIP
Rs 15.00 -
IC Base 40 pin DIP
Quick Info :
- Type : Dual In-Line Package (DIP) Socket
- Number of Pins : 40
- Body : High-quality thermoplastic
- Pin Pitch : 2.54mm
- Mounting Type : Through-hole
- Current Rating : ~1A per pin
Rs 40.00IC Base 40 pin DIP
Rs 40.00 -
IC Rack 33 Drawers
Quick info :
- Material: Plastic
- Colour: Black
- No. of Drawers: 33
Rs 4,950.00Rs 5,100.00IC Rack 33 Drawers
Rs 4,950.00Rs 5,100.00 -
-
IHW20N120R3 N Channel MOSFET
Quick Info:
- Type of IGBT Channel: N-Channel
- Maximum Power Dissipation (Pc), W: 310
- Maximum Collector-Emitter Voltage |Vce|, V: 1200
- Collector-Emitter saturation Voltage |Vcesat|, V: 1.48
- Maximum Collector Current |Ic|, A: 40
Rs 390.00IHW20N120R3 N Channel MOSFET
Rs 390.00 -
IIAKKA Micro Cutting Plier
Quick info :
- Size: 4.5” – 6” inches (115mm – 150mm) – Compact for precision work
- Cutting Capacity: 18-24 AWG (0.5mm – 1.2mm) for soft wires
- Blade Type: Flush Cut / Semi-Flush Cut for smooth, clean cuts
- Blade Material: Hardened High-Carbon Steel / Stainless Steel for durability
- Blade Hardness: HRC 54-62 (Rockwell Hardness) – Ensures long-lasting sharpness
- Coating: Anti-rust nickel plating or oxidation-resistant finish for longevity
- Jaw Opening: 8mm – 12mm – Access tight spaces easily
Rs 490.00IIAKKA Micro Cutting Plier
Rs 490.00 -
INA219 Bi Directional Current Sensor Module
Quick Info :
- Power Input : 3.0V-5.5V
- Up to +26V target voltage
- 0.1 ohm 1% 2W current sense resistor
Rs 950.00Rs 1,150.00INA219 Bi Directional Current Sensor Module
Rs 950.00Rs 1,150.00 -
INA226 Bi-Directional Current Module I2C
Quick Info :
- Senses Bus Voltages : 0 V to 36 V
- High-Side or Low-Side Sensing
- Reports Current, Voltage, and Power
- Operates from 2.7-V to 5.5-V Power Supply
Rs 900.00Rs 1,650.00INA226 Bi-Directional Current Module I2C
Rs 900.00Rs 1,650.00 -
Inductive Proximity Sensor NPN PL-05N
Quick Info :
- Sensing distance: 5mm
- Operating voltage: DC 10-30V
- Screw hole : 3.2mm, Pitch : 10.5mm
- Wire length : 100cm (39-inch)
Rs 690.00Inductive Proximity Sensor NPN PL-05N
Rs 690.00 -
Inductive Proximity Sensor PNP PL-05P
Quick Info :
- Sensing distance : 5mm
- Operating voltage : 10 – 30 VDC
- Response frequency : 800Hz
- Output method : PNP, 150mA load
Rs 690.00Inductive Proximity Sensor PNP PL-05P
Rs 690.00 -
Inductive Proximity Sensor SN04-N1 NPN
Quick Info :
- 4mm detection distance with ±10% accuracy
- Adjustable sensitivity range: 0-3.8mm
- Detects magnetic and non-magnetic metals
- Built-in LED indication for switched state
- IP67 waterproof protection rating
- 3-wire connection: VCC, GND, NPN NO output
Rs 690.00Inductive Proximity Sensor SN04-N1 NPN
Rs 690.00 -
Infrared Encoder/Decoder Module
Quick Info :
- Power Supply Voltage : 5V
- Size : 27 * 17mm
- Communication Type : serial port communication (TTL level)
Rs 650.00Infrared Encoder/Decoder Module
Rs 650.00 -
Infrared Obstacle Avoidance Sensor Module
Quick Info :
- Working Voltage : 3.3v to 5v
- Detectable Distance : 2 ~ 30cm,
- Detection angle : 35 °
- Comparator chip: LM393
Rs 180.00 -