-
LCD1602 Keypad Shield for Arduino
Quick Info :
- Display Type : 16×2 Character LCD
- Keypad Buttons : Up, Down, Left, Right, Select
- Interface : 4-Bit Parallel + A0 Analog
- Board Form Factor : Arduino Uno Shield
Rs 595.00LCD1602 Keypad Shield for Arduino
Rs 595.00 -
Rs 2,850.00
Rs 3,250.00LCR-T4 ESR Meter & Transistor Component Tester
Rs 2,850.00Rs 3,250.00 -
LDR Light Sensitive Module
Quick Info :
- Adjustable sensitivity (via blue digital potentiometer adjustment)
- Operating voltage 3.3V-5V
- Output Type : Digital switching outputs (0 and 1) -D0
- Using LM393 comparator chip, stable
Rs 130.00LDR Light Sensitive Module
Rs 130.00 -
LDR Light Sensitive Module with Relay
Quick Info :
- Operating Voltage: 12V DC
- Module Dimensions: 5cm x 2.7cm x 2cm
- Sensor: Photosensitive resistance module
Rs 550.00Rs 650.00LDR Light Sensitive Module with Relay
Rs 550.00Rs 650.00 -
LDR Sensor 5mm
Quick Info :
- Dark Resistance : ≥ 1MΩ (at 10 Lux)
- Diameter : 5mm
- Material : Cadmium Sulfide
- Light Resistance : 5kΩ to 20kΩ (at 100 Lux)
- Spectral Peak : ~540 nm
- Power Rating : 100mW
Rs 15.00LDR Sensor 5mm
Rs 15.00 -
LDR Sensor 8mm
Quick Info :
- Power Rating : 100mW
- Operating Voltage : Compatible with 3.3V to 5V systems
- Diameter : 8mm
- Material : Cadmium Sulfide (CdS)
- Dark Resistance : ≥ 1MΩ (at 10 Lux)
- Light Resistance : 5kΩ to 20kΩ (at 100 Lux)
Rs 45.00LDR Sensor 8mm
Rs 45.00 -
Lead Free Solder Flux Paste BA-227
Quick Info :
- Model : BA-227
- Type : Lead-free flux paste
- Feature : Strong wetting, anti-oxidation
- Use : PCB and SMD soldering
Rs 1,550.00Rs 1,700.00Lead Free Solder Flux Paste BA-227
Rs 1,550.00Rs 1,700.00 -
-
LED 1W High Power RGB 6-Pin
Quick Info:
- Total Power : 1W
- Pin Count : 6
- Forward Voltage : Typical 2.0V to 3.4V per channel
- Operating Current : Up to 350mA per channel
Rs 60.00Rs 75.00LED 1W High Power RGB 6-Pin
Rs 60.00Rs 75.00 -
-
LED 5mm Bulb Common Anode
Specification:
- 5mm Round Standard Directivity
- Color : Red, Blue, Green, White, Yellow
- UV Resistant : Eproxy
- Forward Current (IF): 30mA
- Forward Voltage (VF): 1.8V to 2.4V
Rs 5.00LED 5mm Bulb Common Anode
Rs 5.00 -
LED Digital Thermometer with Waterproof Probe Sensor DC 5-12V 0.56″
Quick Info :
- Display: 0.56″ LED (Red)
- Power: DC 5-12V
- Range: -50°C to 110°C
- Accuracy: ±0.1°C
- Probe Cable: 1 meter waterproof
- Size: 48 x 29 x 22mm
Rs 550.00Rs 750.00LED Digital Thermometer with Waterproof Probe Sensor DC 5-12V 0.56″
Rs 550.00Rs 750.00 -
LED Driver Constant Current AC DC 3V 300mA 1-3W
Quick Info :
- Type: Constant Current LED Driver
- Power: 1-3W / 300mA
- Input: AC 85-265V universal
- Size: 25mm x 16mm (ultra-compact)
- Use: LED bulbs, downlights, panels, DIY projects
Rs 290.00Rs 300.00LED Driver Constant Current AC DC 3V 300mA 1-3W
Rs 290.00Rs 300.00 -
LED Holder 5MM
Quick Info :
- Type : LED Holder
- Material : made from plastic And Nylon
- Size Compatibility : 5mm
- Mounting Method : Snap-in, screw-in
- Voltage Rating : Compatible with standard LED
Rs 15.00LED Holder 5MM
Rs 15.00 -
LED PSU Tester 20/24 Pin ATX SATA HDD
Quick Info:
- Supported Connectors : 20/24-pin ATX, SATA, HDD (Molex), PCI-E
- Voltage Rails Tested : +3.3V, +5V, +12V, -12V, +5VSB
- Display : LED Voltage Readout
- Status Indicator : Good / Bad LED
- Compatibility : Standard ATX Power Supplies
- Usage : Tool-free plug-and-test
Rs 1,850.00Rs 2,100.00LED PSU Tester 20/24 Pin ATX SATA HDD
Rs 1,850.00Rs 2,100.00 -
LED Strip IP68
Quick Info :
- Voltage : 12V DC
- Thickness : 3mm
- Length: 64mm
- Power Consumption : Low Power
- Waterproof Rating : IP65 (Water-Resistant)
- Package only contains 1 strip
Rs 60.00LED Strip IP68
Rs 60.00 -
LED Traffic Light Module 5V
Quick Info:
- Module Type : LED Traffic Light Module
- Operating Voltage : 5V DC
- LED Colors : Red, Yellow, Green
- Application : STEM Education, Arduino Projects
Rs 120.00Rs 150.00LED Traffic Light Module 5V
Rs 120.00Rs 150.00
