Best Seller Items
-
-
2 – 10 Pin JST XH 2.54 Pitch Connector Cable and Base
Quick Info:
- Wire Type : 26AWG
- Pitch: 2.5mm±0.05
- length: 15cm
Rs 25.00 – Rs 75.00 -
Jumper Wire Male-Male 20cm
Quick Info :
- Connector : Male to Male
- 1 Cable : Rs. 6
- 1 Set (40pcs) : Rs. 240
Rs 6.00Jumper Wire Male-Male 20cm
Rs 6.00 -
Jumper Wire Male-Female 30cm
Quick Info :
- Connector : Male to Female
- 1 Cable : Rs. 8
- 1 Set (40pcs) : Rs. 320
Rs 8.00Jumper Wire Male-Female 30cm
Rs 8.00 -
Jumper Wire Male-Male 30cm
Quick Info :
- Connector : Male to Male
- 1 Cable : Rs. 8
- 1 Set (40pcs) : Rs. 320
Rs 8.00Jumper Wire Male-Male 30cm
Rs 8.00 -
Jumper Wire Male-Female 20cm
Quick Info :
- Connector : Male to Female
- 1 Cable : Rs. 6
- 1 Set (40pcs) : Rs. 240
Rs 6.00Jumper Wire Male-Female 20cm
Rs 6.00
-
TL494 Pulse-Width-Modulation Control IC
Quick Info :
- Output Voltage : 40V
- Output Current : 200mA
- Supply Voltage Min : 7V
- Supply Voltage Max : 40V
- Controller IC Case Style : DIP
Rs 60.00 -
-
18650 Lithium Battery Charger 2S AC230V
Quick Info :
- Suitable for: 3.7V lithium rechargeable batteries, including 18650
- Input: AC100-240V
- Output: 4.2V/1A * 2
Rs 490.00Rs 690.0018650 Lithium Battery Charger 2S AC230V
Rs 490.00Rs 690.00 -
Micro SD card reader module
Quick Info:
- Control Interface: GND, VCC, MISO, MOSI, SCK, CS
- Size: 45 x 28mm
- Net weight: 6g
Rs 350.00Micro SD card reader module
Rs 350.00 -
Project Enclosure 158mm X 90mm X 60mm
Quick Info :
- Dimensions: 158mm X 90mm X 46mm
Rs 1,000.00Project Enclosure 158mm X 90mm X 60mm
Rs 1,000.00 -
Flame Sensor Module
Quick Info :
- Operating Voltage : 3.3V ~ 5.5V
- Infrared Wavelength Detection : 760nm ~ 1100nm
- Sensor Detection Angle : 60°
Rs 280.00Flame Sensor Module
Rs 280.00 -
TIP122 NPN Epitaxial Darlington Transistor
Quick Info :
- Transistor Type : NPN – Darlington
- Current – Collector (Ic) (Max) : 5 A
- Voltage – Collector Emitter Breakdown (Max) : 100 V
Rs 40.00 -
-
-
-
MQ-2 Gas Sensor Module for Combustible Gas
Quick Info :
- Operating Voltage is +5V
- Can be used to Measure or detect LPG, Alcohol, Propane, Hydrogen, CO and even methane
- Analog output voltage: 0V to 5V
- Digital Output Voltage: 0V or 5V (TTL Logic)
Rs 490.00 -
-
MFRC522 RFID Reader Module
Quick Info :
- MFRC522 chip based board
- Operating frequency: 13.56MHz
- Supply Voltage: 3.3V
- Current: 13-26mA
Rs 590.00MFRC522 RFID Reader Module
Rs 590.00 -
Keypad Flexible 16 Keys
Quick Info :
- Arduino and Raspberry Pi compatible
- 16-key membrane switch pad has 8 pin female header on end of flat cable
- White sticker on back can be peeled off for adhesive mounting
Rs 290.00Keypad Flexible 16 Keys
Rs 290.00 -
HX711 Load Cell Amplifier
Quick Info :
- Operation Voltage: 2.7V-5V
- Operation Current: < 1.5mA
- Sample rate: 10Hz
- Simultaneous 50 and 60Hz supply rejection
- Available Load Cells 5kg, 10kg or 20kg
Rs 290.00HX711 Load Cell Amplifier
Rs 290.00 -
PAM8403 3W Audio Amplifier
Quick Info:
- Supply Voltage: 5VDC
- 3W Output at 10% THD with a 4Ω Load and 5V Power Supply
Rs 190.00PAM8403 3W Audio Amplifier
Rs 190.00 -
Arduino Pro Mini (Atmega328 5V)
Quick Info :
- Microcontroller: ATmega328
- Board Power Supply: 3.35 -12 V (3.3V model) or 5 – 12 V (5V model)
- Circuit Operating Voltage: 3.3V or 5V (depending on model)
- Digital I/O Pins: 14
- PWM Pins: 6
Rs 1,190.00Rs 1,590.00Arduino Pro Mini (Atmega328 5V)
Rs 1,190.00Rs 1,590.00 -
7404 Hex Inverter Gate
Quick Info:
- Logic Type : Inverter
- Number of Circuits : 6
- Number of Inputs : 1
- Voltage – Supply :4.75V ~ 5.25V
Rs 60.007404 Hex Inverter Gate
Rs 60.00 -
7400 Quad 2-Input NAND Gate
Quick Info:
- Logic Type : NAND Gate
- Number of Circuits : 4
- Number of Inputs : 2
- Voltage – Supply : 4.75V ~ 5.25V
Rs 60.007400 Quad 2-Input NAND Gate
Rs 60.00 -
5V Step-Up Power Module Board 134N3P
Quick Info :
- BAT Discharging Stop Voltage: 2.9V.
- Discharging Efficiency:85%(input 3.7V output 5V/1A).
- Charging and discharging indication.
- Internally installed charging and discharging power MOS.
Rs 165.005V Step-Up Power Module Board 134N3P
Rs 165.00 -
NEO-6M GPS Module with Active Antenna
Quick Info :
- Operating temperature range: -40 TO 85°CUART TTL socket
- EEPROM to save configuration settings
- Rechargeable battery for Backup
- Supply voltage: 3.3 V
Rs 1,290.00Rs 1,800.00NEO-6M GPS Module with Active Antenna
Rs 1,290.00Rs 1,800.00 -
2N5401 PNP Transistor
Quick Info :
- Transistor Type : PNP
- Current – Collector (Ic) (Max) : 600 mA
- Voltage – Collector Emitter Breakdown (Max) : 150 V
Rs 20.002N5401 PNP Transistor
Rs 20.00 -
DHT11 Humidity and Temperature Sensor
Quick Info :
- Working Voltage : 3 to 5V DC
- Humidity Range : 20-80% humidity; ±5% accuracy
- Temperature Range : -20°C to 50°C temperature; ±2°C accuracy
Rs 390.00DHT11 Humidity and Temperature Sensor
Rs 390.00 -
16340 Lithium Ion Battery
Quick info :
- Battery Type: Lithium Ion
- Model: 16340
- Capacity: 1400mAh
Rs 690.0016340 Lithium Ion Battery
Rs 690.00 -
Arduino Uno SMD CH340G Compatible
Quick Info :
- Microcontroller: ATmega328P
- Serial IC : CH340G
- Operating Voltage: 5V
- Input Voltage: 7-12V (recommended 5V)
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- PWM Digital I/O Pins: 6
- Analog Input Pins: 6
Rs 1,200.00 – Rs 1,300.00 -
Project Enclosure 89mm X 65mm X 59mm
Quick Info :
- Dimensions: 89mm X 65mm X 59mm
Rs 490.00Project Enclosure 89mm X 65mm X 59mm
Rs 490.00 -
Double BTS7960 43A Motor Driver Module
Quick Info :
- Input Voltage: 6 ~ 27V
- Driver: Dual BTS7960 H Bridge Configuration
- Peak current: 43-Amp
Rs 1,490.00Double BTS7960 43A Motor Driver Module
Rs 1,490.00 -
LM358 Operational Amplifier
Quick Info :
- No. of Amplifiers : 2 Amplifier
- Bandwidth : 700kHz
- Slew Rate : 0.3V/µs
- Supply Voltage Range : ± 1.5V to ± 16V
Rs 45.00LM358 Operational Amplifier
Rs 45.00 -
KY-008 5mW Laser sensor Module
Quick Info :
- Operating Voltage 5V
- Output Power 5mW
- Wavelength 650nm
- Operating Current less than 40mA
Rs 290.00KY-008 5mW Laser sensor Module
Rs 290.00 -
Mini DC 3A Motor PWM Speed Controller
Quick Info :
- Operating Voltage: DC 4.5V-35V
- Control Power: 90W (maximum)
- Size: 30mm x 26mm x 14mm (Without Handle)
Rs 290.00Mini DC 3A Motor PWM Speed Controller
Rs 290.00 -
USB2.0 TO TTL SERIAL 6PIN CONVERTER CH340G
Quick Info :
- Built-in USB to TTL Transfer chip.
- Designed to be used for USB to TTL electronic projects.
- TTL interface output. easy to connect to your MCU.
Rs 490.00 -
RS232 Serial Port To TTL Converter Module
Quick Info :
- Chipset: MAX3232
- Working Voltage: 3.3V-5.5V
- Port: TX RX VCC GND
Rs 390.00