Shop
Best Seller Items
-
-
Brass Threaded Insert Knurled M3
Quick Info :
- Thread: M3 (0.5mm pitch)
- Material: Knurled brass
- Type: Heat-set threaded insert
- Lengths: 3mm, 4mm, 5mm, 7mm
- Outer Diameter: 4.2mm, 4.5mm, 5mm
- Use: 3D printing, plastic enclosures, robotics assemblies
Price range: Rs 10.00 through Rs 20.00Brass Threaded Insert Knurled M3
Price range: Rs 10.00 through Rs 20.00 -
M2 Phillips Head Bolts with Nuts
Quick Info :
- Size: M2 Thread
- Available Lengths: 4mm, 6mm, 8mm, 12mm, 16mm, 25mm
- Material: Stainless Steel
- Head Type: Phillips
- Includes: Bolt + Nut
Price range: Rs 10.00 through Rs 15.00M2 Phillips Head Bolts with Nuts
Price range: Rs 10.00 through Rs 15.00 -
M3 Phillips Head Bolts with Nuts
Quick Info :
- Size: M3 Thread
- Available Lengths: 4mm, 6mm, 8mm, 10mm, 12mm, 16mm, 20mm, 25mm, 30mm
- Material: Stainless Steel
- Head Type: Phillips
- Includes: Bolt + Nut
Price range: Rs 10.00 through Rs 40.00M3 Phillips Head Bolts with Nuts
Price range: Rs 10.00 through Rs 40.00 -
Male-Female Jumper Wire 30cm
Quick Info :
- Connector Type : Male to Female
- Wire Length : 30cm
- Pin Pitch : 2.54mm
- Wire Gauge : 24AWG
Rs 8.00Male-Female Jumper Wire 30cm
Rs 8.00 -
JST XH 2.54mm Connector Cable and Base 2 – 12 Pin
Quick Info:
- Type: JST-XH 2.54mm
- Pins: 2P – 12P options
- Cable: 200mm, 26AWG
- Current: 3A per pin
- Includes: Male + Female pair
Price range: Rs 25.00 through Rs 90.00
-
Inductive Proximity Sensor PNP PL-05P
Quick Info :
- Sensing distance : 5mm
- Operating voltage : 10 – 30 VDC
- Response frequency : 800Hz
- Output method : PNP, 150mA load
Rs 690.00Inductive Proximity Sensor PNP PL-05P
Rs 690.00 -
Precision Screw Driver Set 7 Pcs SW-993
Quick info :
Bit pattern:
“+” (Phillips) – 1.5 mm: This represents a Phillips head screwdriver bit, typically used for cross-head screws.
“-” (Flathead) – 2.5 mm: This indicates a flathead (slotted) screwdriver bit, used for straight slotted screws.
“★” (Torx) – 0.8 mm: This represents a Torx screwdriver bit, used for star-shaped screw heads, commonly found in electronics.
“Y” (Tri-Wing) – 0.6 mm: This denotes a Tri-Wing screwdriver bit, often used for specialized screws in electronic devices like gaming consoles.Rs 690.00Precision Screw Driver Set 7 Pcs SW-993
Rs 690.00 -
-
Wire Cutter Nipper 12
Quick Info :
- Size (L x B x H) : 15 cm x 5 cm x 2 cm
- Weight : 100 g
- Size : 6 Inch
Rs 690.00Wire Cutter Nipper 12
Rs 690.00 -
Arduino Compatible XD-204 Data Logger Shield
Quick Info :
- Real Time Clock Module : DS1307
- SD Card reader : standard SD card
- RTC battery included
Rs 690.00 -
-
-
ATTINY85-20PU Atmel
Quick Info :
- : 20MHz
- : 8KB
- : 512Byte
- : 8 Pins
Rs 690.00ATTINY85-20PU Atmel
Rs 690.00 - : 20MHz
-
Inductive Proximity Sensor NPN PL-05N
Quick Info :
- Sensing distance: 5mm
- Operating voltage: DC 10-30V
- Screw hole : 3.2mm, Pitch : 10.5mm
- Wire length : 100cm (39-inch)
Rs 690.00Inductive Proximity Sensor NPN PL-05N
Rs 690.00 -
LM2596 CC/CV Li-Ion Charger/LED Power Supply Module
Quick Info :
- Input Voltage: 5-35V
- Input Voltage Must Be At Least 2V Above Output Voltage
- Output Voltage: 1.25-30V (infinitely adjustable)
- Constant Current Range: 0-3A (infinitely adjustable)
Rs 690.00 -
0.91″ OLED Display 128×32 I2C SSD1306
Quick Info:
- Driver IC : SSD1306
- Resolution : 128 x 32 Pixels
- Interface : I2C (IIC)
- Operating Voltage : 3.3V – 5V
- Display Color : White / Blue
- Module Dimensions : 38 x 12 mm
Rs 680.00Rs 750.000.91″ OLED Display 128×32 I2C SSD1306
Rs 680.00Rs 750.00 -
Dual USB Power Bank Module 5V 2.4A
Quick Info:
- Battery Type : 3.7V 18650 Li-Ion
- Charge Input : Type-C + Micro USB (5V 1A each)
- USB Output : 5V 2.4A (QC) + 5V 1A
- Display : Blue LED battery % indicator
- Overcharge Cut-off : 4.25V
- Over-Discharge Cut-off : 2.90V
- Protection : Overcharge, over-discharge, overcurrent
Rs 680.00Rs 800.00Dual USB Power Bank Module 5V 2.4A
Rs 680.00Rs 800.00 -
OLED 128X64 0.96 inch Display Module Blue
Quick Info :
- OLED Driver IC: SSD1306
- Color: Blue
- Resolution: 128 x 64
- Visual Angle: >160°
- Input Voltage: 3.3V ~ 6V
- Compatible I/O Level: 3.3V, 5V
Rs 680.00Rs 990.00OLED 128X64 0.96 inch Display Module Blue
Rs 680.00Rs 990.00 -
E18-D80NK IR Proximity Sensor Switch 3-80cm
Quick Info:
- Model : E18-D80NK
- Supply Voltage : 5VDC
- Detection Range : 3cm to 80cm, adjustable
- Output Type : NPN, digital (normally open)
- Response Time : Less than 2ms
Rs 650.00Rs 850.00E18-D80NK IR Proximity Sensor Switch 3-80cm
Rs 650.00Rs 850.00 -
OMRON G2R-2 24VDC 5A PCB Power Relay
Quick Info :
- Model: G2R-2
- Coil Voltage: 24VDC
- Contact Form: DPDT (2c)
- Switching Current: 5A
- Mounting: PCB Terminals
Rs 650.00Rs 750.00OMRON G2R-2 24VDC 5A PCB Power Relay
Rs 650.00Rs 750.00 -
TDA7388 Audio Amplifier IC
Quick Info :
- Type: Quad Bridge Class AB Audio Amplifier
- Number of Channels: 4
- Operating Voltage Range: 6V – 18V (Typical: 14.4V)
- Maximum Power Output: 4 x 41W (at 4Ω, 14.4V, 10% THD)
- Nominal Output Power: 4 x 25W (at 4Ω, 14.4V, 1% THD)
- Load Impedance: 4Ω to 8Ω
Rs 650.00TDA7388 Audio Amplifier IC
Rs 650.00 -
TDA7265 25 +25W Stereo Amplifier
Quick Info :
- Output Power: 25W
- Amplifier Class: AB
- No. of Channels: 2
- Channel Supply Voltage Range: ± 5V to ± 25V
- Load Impedance: 4ohm
Rs 650.00TDA7265 25 +25W Stereo Amplifier
Rs 650.00 -
Active GPS Patch Antenna (25*25)
Quick Info :
- Frequency – 1559Mhz-1609Mhz
- Active antenna noise figure < 1.5dB
- Cable – RF1.13
- Connector – I-PEX
Rs 650.00Active GPS Patch Antenna (25*25)
Rs 650.00 -
GSM GPRS Adhesive Antenna
Quick Info :
- Low Freq. range – 820-960mHz
- High Freq. range – 1710-1990mHz
- Cable length – Max 3m
- Connector Type – SMA
Rs 650.00Rs 890.00GSM GPRS Adhesive Antenna
Rs 650.00Rs 890.00 -
ADXL345 3-Axis Accelerometer Module
Quick Info :
- 3V-6V DC Supply Voltage
- On-board LDO Voltage regulator
- Built-in Voltage level convertor (MOSFET based)
- It can be interface with 3.3V or 5V Microcontroller.
Rs 650.00Rs 690.00ADXL345 3-Axis Accelerometer Module
Rs 650.00Rs 690.00 -
1 Channel 5V OMRON Solid State Relay Module
Quick Info :
- Relay Type : Solid state (Omron G3MB-202P)
- Operating Voltage : 5V DC
- Load Voltage : 100V to 240V AC
- Maximum Load Current : 2A
- Isolation : Phototriac (optical)
Rs 650.00 -
Wire Stripper 5 Inch RT125
Quick Info :
- Brand: R’DEER
- Model: RT-125F
- Size: 5 inches (125mm)
- Material: High-carbon steel with plastic-coated handles
- Stripping sizes ranging from AWG 30 to 10
- Cutting small wires and cables.
Rs 600.00Wire Stripper 5 Inch RT125
Rs 600.00 -
LCD1602 Keypad Shield for Arduino
Quick Info :
- Display Type : 16×2 Character LCD
- Keypad Buttons : Up, Down, Left, Right, Select
- Interface : 4-Bit Parallel + A0 Analog
- Board Form Factor : Arduino Uno Shield
Rs 595.00LCD1602 Keypad Shield for Arduino
Rs 595.00 -
12V to 220V 35W DC-AC Power Inverter Module
Quick Info :
- Type: DC-AC Inverter
- Input: 12V DC
- Output: 220V AC
- Power: 35W
Rs 590.00Rs 650.0012V to 220V 35W DC-AC Power Inverter Module
Rs 590.00Rs 650.00 -
UM3561 Siren Generator IC
Quick Info :
- Operating Voltage: 3V to 12V
- Output Frequency: Variable (based on input)
- Output Waveform: Square wave
- Output Drive Current: 50mA (max)
- Operating Temperature Range: -20°C to +70°C
Rs 590.00UM3561 Siren Generator IC
Rs 590.00 -
Mono Male 6.5mm to 2RCA Cable
Quick Info :
- Connector 1 : 6.5mm (1/4 inch) Mono Male
- Connector 2 : 2 x RCA Male (Left/Right)
- Color : Black
- Cable Length : 1.5m
- Shielding : Dual-layer shielding
Rs 590.00Mono Male 6.5mm to 2RCA Cable
Rs 590.00 -
6 Ohms 15W Speaker 3 Inch
Quick Info :
- Impedance: 6 Ω
- Rated Power Handling: 15 W
- Magnet type : Double Magnet
- Frequency Response: 108 Hz – 20 kHz
- Speaker Diameter: 3 inches (78 mm)
- Mounting Depth: 52 mm
Rs 590.006 Ohms 15W Speaker 3 Inch
Rs 590.00 -
BH1750 Digital Ambient Light Sensor Module
Quick Info:
- Measurement Range : 1 to 65,535 lux
- Resolution : 16-bit
- Communication Interface : I2C
- Operating Voltage : 2.4V to 3.6V (5V tolerant)
Rs 590.00 -
Mini Display Temperature Humidity Sensor
Quick Info :
- LCD Size: 35.7*16.8mm
- Operation Temperature: -15°c to 70°c
- Humidity measurement range: 10%~99%
Rs 590.00Mini Display Temperature Humidity Sensor
Rs 590.00 -
4S 40A Li-ion Lithium 18650 Battery BMS Protection Board
Quick Info :
- Capable Lithium battery : 18650, 26650, (Lipo) lithium polymer battery
- Product Size: 46 * 60 * 3.4mm
- Product weight: 10.3g
- Charging voltage: 16.8V – 18.1V
Rs 590.00 -
Project Enclosure 80mm X 80mm X 60mm
Quick Info :
- Dimensions: 80mm X 80mm X 60mm
Rs 590.00Project Enclosure 80mm X 80mm X 60mm
Rs 590.00 -
Project Enclosure 115mm X 90mm X 55mm
Quick Info :
- Dimensions: 115mm X 90mm X 55mm
Rs 590.00Project Enclosure 115mm X 90mm X 55mm
Rs 590.00 -
Glue gun 20W
Quick Info :
- Power : 20W
- Operating Voltage : 100-240V, 50/60Hz
- Heating Time : 3-5 minutes
- Glue Stick Diameter : 7mm-8mm
- Nozzle Type : Precision metal nozzle for controlled application
Rs 590.00Glue gun 20W
Rs 590.00
