Quick Info :
10x PCB Stand Screw M3
20x M3 Screw Nut
Rs 100.00Rs 800.00
Specifications :
Input Voltage : AC 100 ~ 240V 50/60 HZ
Output Voltage: DC 9V
Output Current: 1A
Plug Type : UK Plug
Rs 790.00
Quick Info
Supply voltage (typically): 3.3V
Battery not included
Battery : CR2032
Rs 790.00
Quick Info :
Standard USB type A male and TTL 5 pin connector.
5 pins for 3.3V, TXD, RXD, GND & 5V.
Baud rates: 300 bps to 1.5 Mbps
Rs 790.00
Quick Info :
Power supply: 3-5v (Recommended 3.3v)
Communication mode: Standard IIC/SPI communication protocol
Chip built in AD 16bit converter, 16 bit data output
Gyro range: ±125 ±250 ±500 ±1000 ±2000 degrees /s
Rs 750.00
Quick Info :
This infrared sensor trio detector and trio output Build-in TCRT5000 sensor
Number of channels : 3
Rs 750.00
Quick Info :
Stackable design, easy to plug into the ARDUINO development board.
Coupled with the Arduino Bluetooth Bee Bluetooth module, and other Bluetooth devices can communicate Wirelessly.
Coupled with the XBee module, you can achieve two or more sets of communication between Arduino or Arduino and PC Communications.
Rs 750.00
Quick Info :
Single-Supply Operation (2.7V to 5.5V)
Best Detection Range: 10mm
High-Resolution Conversion of Light Intensity to Frequency
Programmable Color and Full-Scale Output Frequency
Rs 750.00
Quick Info :
Input Voltage : AC 220 ~ 240V 50/60 HZ
Output Voltage: DC 5V
Output Current: 3A
Output type: Micro USB
Rs 700.00
Quick Info :
Battery Type : Lithium Polymer (LiPo)
Nominal Voltage : 3.7V DC
Capacity : 250mAh
Charging Voltage : 4.2V ± 0.05V
Discharge Cutoff Voltage : ~3.0V
Continuous Discharge Rate : ~1C – 2C
Max Discharge Current : ~250mA – 500mA
Rs 690.00
Quick Info :
Length: 5 inches (125mm)
Blade Material: Hardened Carbon Steel / Stainless Steel
durable blades for clean and accurate cuts.
Made from high-quality materials for long-lasting performance.
Flush-cut or semi-flush (for clean, precise cuts)
Rs 690.00
Quick info :
Output Power: 2x50W (stereo mode) or 100W (mono mode)
Frequency Response: 20Hz to 20kHz
Signal-to-Noise Ratio (SNR): ≥100dB
Chip: TPA3116D2
Power Supply Voltage: 12-24V DC
Rs 690.00
Quick Info :
Operates with a single 3.3 V Supply
Bus Pin ESD Protection Exceeds ±16 kV HBM
High Input Impedance Allows for Up to 120 Nodes on a Bus
Rs 690.00
Quick Info :
Sensing distance : 5mm
Operating voltage : 10 – 30 VDC
Response frequency : 800Hz
Output method : PNP, 150mA load
Rs 690.00
Quick Info :
Size (L x B x H) : 15 cm x 5 cm x 2 cm Weight : 100 g Size : 6 Inch
Rs 690.00
Quick Info :
Real Time Clock Module : DS1307
SD Card reader : standard SD card
RTC battery included
Rs 690.00
Quick Info :
Dimensions: 115mm X 90mm X 55mm
Rs 690.00
Quick Info :
CPU Speed : 20MHzProgram Memory Size : 8KBRAM Memory Size : 512ByteNo. of Pins : 8 Pins
Rs 690.00
Quick Info :
Input Voltage: 5-35V
Input Voltage Must Be At Least 2V Above Output Voltage
Output Voltage: 1.25-30V (infinitely adjustable)
Constant Current Range: 0-3A (infinitely adjustable)
Rs 690.00
Quick Info :
Frequency – 1559Mhz-1609Mhz
Active antenna noise figure < 1.5dB
Cable – RF1.13
Connector – I-PEX
Rs 650.00
Quick Info :
Operating Voltage: 12V DC
Module Dimensions: 5cm x 2.7cm x 2cm
Sensor: Photosensitive resistance module
Rs 650.00
Quick Info :
Brand: R’DEER
Model: RT-125F
Size: 5 inches (125mm)
Material: High-carbon steel with plastic-coated handles
Stripping sizes ranging from AWG 30 to 10
Cutting small wires and cables.
Rs 600.00
Quick Info :
Operating Voltage: 5V
5 Push buttons.
Left, Right, Up, Down and Select buttons
Screen contrast adjustment
Arduino Reset button
Rs 595.00
Quick Info :
Impedance: 6 Ω
Rated Power Handling: 15 W
Magnet type : Double Magnet
Frequency Response: 108 Hz – 20 kHz
Speaker Diameter: 3 inches (78 mm)
Mounting Depth: 52 mm
Rs 590.00
Quick Info :
Dimensions: 80mm X 80mm X 60mm
Rs 590.00
