Quick Info :
Size (L x B x H) : 15 cm x 5 cm x 2 cm Weight : 100 g Size : 6 Inch
Rs 690.00
Quick Info :
Real Time Clock Module : DS1307
SD Card reader : standard SD card
RTC battery included
Rs 690.00
Quick Info :
CPU Speed : 20MHzProgram Memory Size : 8KBRAM Memory Size : 512ByteNo. of Pins : 8 Pins
Rs 690.00
Quick Info :
Input Voltage: 5-35V
Input Voltage Must Be At Least 2V Above Output Voltage
Output Voltage: 1.25-30V (infinitely adjustable)
Constant Current Range: 0-3A (infinitely adjustable)
Rs 690.00
Quick Info :
Frequency – 1559Mhz-1609Mhz
Active antenna noise figure < 1.5dB
Cable – RF1.13
Connector – I-PEX
Rs 650.00
Quick Info :
Operating Voltage: 12V DC
Module Dimensions: 5cm x 2.7cm x 2cm
Sensor: Photosensitive resistance module
Rs 650.00
Quick Info :
Channels : 1
Input release voltage: 3.5 to 5V
Rated load voltage: 100V to 240V AC
Load current: 0.10 to 2A
Rs 600.00
Quick Info :
Operating Voltage: 5V
5 Push buttons.
Left, Right, Up, Down and Select buttons
Screen contrast adjustment
Arduino Reset button
Rs 595.00
Quick Info :
LED Peak Wavelength: 660nm/880nm
LED Supply Voltage: 3.3~5V
Interface: I2C Interface
Operating Temperature Range: -40°C to +85°C
Rs 590.00
Quick Info :
Power requirements : VCC – 5V±0.1
DO output : TTL digital 0 and 1 (0.1 and 5V)
AO output : 0.1-0 .3 V (relative to pollution), the maximum concentration of a voltage of about 4V
Detection Gas: Carbon Monoxide
Rs 590.00
Quick Info :
Max. Operating Voltage: 45 V
Min. Operating Voltage: 8.2 V
Max. Current Per Phase: 2.5 A
Alternatives for DRV8825 : A4988 , TMC2209
Rs 590.00
Quick Info :
Operating voltage : 2.3V – 5.5V
Battery not included
Battery : CR2032
Rs 590.00
Quick Info :
Eight 7-Segment LED Displays with 0.36″ high red digits
LED displays mounted in sockets
Built-in MAX7219 LED Driver
SPI 3-wire serial interface for easy hookup to MCU
Can daisy-chain multiple modules together for larger displays
Rs 590.00
Quick Info :
Simple 3 pin interface to control the resistance
Supply voltage: 3V-5V
Chip: X9C103S
PCB board size: 2.7 * 1.3CM
10K span potentiometer.
Rs 590.00
Quick Info :
Resolution 640×480 VGA
Flicker (50/60 Hz) auto detection
Onboard regulator, only single 3.3V supply needed
Rs 590.00Rs 925.00
Quick Info:
Working voltage: 6 to 18V
Dual channel 15W+15W
on-board dial potentiometer
Rs 590.00
Quick Info :
Input Voltage : AC 100 ~ 240V 50/60 HZ
Output Voltage: DC 12V
Output Current: 1A
Plug Type : UK Plug
Rs 580.00
Quick Info :
The current sensor chip : ACS712
Current measuring : up to 30A
5V power supply, on-board power indicator
Rs 550.00
Quick Info :
5W Output at 10% (Total Harmonic Distortion
3W Output at 10% THD with a 4Ω Load and 5V Power Supply
Rs 550.00
Quick Info :
Suitable for Arduino UNO and Mega Boards
IIC, Bluetooth, SD Card Interface
APC220 wireless RF module communication interface
RB URF v1.1 ultrasonic sensors interface
128 x 64 LCD parallel and 32 servo controller interface
Rs 550.00
Quick Info :
Input Voltage : AC 100 ~ 240V 50/60 HZ
Output Voltage: DC 5V
Output Current: 1A
Plug Type : UK Plug
Rs 500.00
Quick Info :
Dimensions: 175mm X 95mm X 30mm
Rs 490.00
Quick Info :
Suitable for: 3.7V lithium rechargeable batteries, including 18650
Input: AC100-240V
Output: 4.2V/1A * 2
Rs 490.00Rs 690.00
