Quick Info :
Dark Resistance : ≥ 1MΩ (at 10 Lux)
Diameter : 5mm
Material : Cadmium Sulfide
Light Resistance : 5kΩ to 20kΩ (at 100 Lux)
Spectral Peak : ~540 nm
Power Rating : 100mW
Rs 15.00
Quick info:
Temperature Cutoff: 102-145
Rated Current: 2A
Rated Voltage: 250V~
Rs 30.00
Quick Info :
Wavelength Sensitivity : 850nm
Case Material : Black epoxy for enhanced IR filtering
Package Type : ,5mm
Operating Voltage : 2.7V – 5.5V
Current Consumption : ≤1.5mA (typical)
Reception Distance : 10m – 30m (depends on model)
Carrier Frequency : 30kHz – 56kHz
Rs 30.00
Quick Info :
Wavelength Sensitivity : 850nm – 950nm (typically 940nm)
Operating Voltage : 2.7V – 5.5V
Current Consumption : ≤1.5mA (typical)
Reception Distance : 10m – 30m (varies by model)
Carrier Frequency : 30kHz – 56kHz
Rs 40.00
Quick Info :
Resistance (at 25°C): 10KΩ (±1% to ±5% tolerance)
Beta Value (B25/50): 3950K – 4500K (varies by model)
Operating Voltage: 3V – 5V (typically used with microcontrollers)
Power Dissipation: ≤100mW
Rs 50.00
Quick Info :
Resistance (at 25°C): 100KΩ (±1% to ±5% tolerance)
Beta Value (B25/50): 3950K – 4500K (varies by model)
Operating Voltage: 3V – 5V (typically used with microcontrollers)
Power Dissipation: ≤100mW
Rs 50.00
Quick info :
Model: TTP223.
Dimensions: 15mm x 11mm.
Input Voltage: 2 Volt – 5.5 Volts DC.
Rs 60.00
Quick info:
Normally Open
Voltage:
Switching (VDC-MAX.): 200
Breakdown (VDC-MIN): 250
Arc-Quench (VDC-MIN): 200
Current:
Switching (AMPERES-MAX.): 0.5
Carry (AMPERES-MAX.): 1.2
Rs 90.00
Quick Info :
Adjustable sensitivity (via blue digital potentiometer adjustment)
Operating voltage 3.3V-5V
Output Type : Digital switching outputs (0 and 1) -D0
Using LM393 comparator chip, stable
Rs 130.00
Quick Info :
Working Voltage : DC 3-5V
Working Current : <20mA
Operating temperature: 10~30 Celsius
Sensor Type : Analog
Rs 130.00
Quick Info :
Working Voltage : 3.3v to 5v
Detectable Distance : 2 ~ 30cm,
Detection angle : 35 °
Comparator chip: LM393
Rs 180.00
Quick Info :
Working voltage of 3.3V to 5V
Output form: digital switch output (0 and 1)
Using infrared reflection sensors TCRT5000
Test reflection distance: 1mm to 25mm
Rs 180.00Rs 270.00
Quick Info :
Type: Flame Detection Module
Voltage: 3.3–5V
Outputs: Analog + Digital
Pins: 4-Pin Interface
Use: Fire detection, safety projects
Rs 180.00Rs 280.00
Quick Info :
Voltage sensing range – 5v to 25v
Voltage Analog Resolution: 0.00489V
Rs 180.00
Quick Info :
Type: Vibration/Shock Sensor
Voltage: 3.3V – 5V
Output: Digital
Sensitivity: Adjustable
Chip: LM393 Comparator
Rs 180.00Rs 200.00
Quick Info :
Operating voltage : 3.3 V
Operating current : 4~5 mA
Signal to noise ratio : 54 dB
Rs 200.00
Quick Info :
Operating Voltage : 4V to 30V DC
Output Voltage : 0 mV + (10 mV/°C × Temperature)
Temperature Range : -55°C to +150°C
Accuracy : ±0.5°C at 25°C
Linear Scale Factor : 10 mV/°C
Response Time : Typically less than 1 second
Rs 200.00
Quick Info :
Type: Microwave Radar Motion Sensor
Voltage: 4-28V DC
Range: 5-7 meters
Output: 3.3V Digital
Detection: 360° Omnidirectional
Rs 200.00Rs 300.00
Quick Info :
Chip type: VS1838B
Operating Voltage: 3.3V to 5V
Current Consumption: 1.5mA peak
Receiving angle: 90 °
Reception distance: 17m
Rs 220.00
Quick Info
Working voltage : 5V
Output format : Digital switching output (0 and 1), and analog voltage output AO
Potentiometer adjust the sensitivity
Uses a wide voltage LM393 comparator
Rs 230.00
Quick Info :
Operating voltage: 3.3V~5V.
Adjustable sensitivity (shown in blue digital potentiometer adjustment)
Dual output mode,analog output more accurate.
A fixed bolt hole for easy installation.
With power indicator (red) and digital switching output indicator (green).
Rs 230.00
Quick Info :
Temperature Range : -55°C to +85°C
Wire Interface : 1-wire interface
3.3 and 5V compatible
Rs 240.00Rs 290.00
Quick Info :
Working Voltage : 3 to 5V DC
Humidity Range : 20-80% humidity; ±5% accuracy
Temperature Range : -20°C to 50°C temperature; ±2°C accuracy
Rs 250.00Rs 390.00
Quick Info :
Working voltage: 3.3V~5V
The output form: Digital switching outputs. (0 and 1)
Pin Configuration : VCC, GND, Dout and Aout
Rs 250.00
Quick info:
Operating Voltage: 3.3V to 5V DC
Output format: Digital switching output ( 0 and 1 )
LEDs indicating output and power
Rs 250.00
Quick Info :
Load Capacity : 5kg / 10kg
Type: Half Bridge Load Cell
Interface: Requires Load Cell Amplifier (HX711)
Applications: Weighing scales, automation, DIY projects
Rs 250.00Rs 350.00
Quick Info :
Usable temperature range: -55 to 125°C (-67°F to +257°F)
Usable with 3.0V to 5.5V power/data
Stainless steel tube 6mm diameter by 30mm long
Cable is 36″ long / 91cm, 4mm diameter (1 Meter Long)
Rs 260.00
Quick Info :
Type : Strain Gauge Load Cell
Material : Aluminum Alloy
Capacity : 50kg (Maximum Load)
Shape : Rectangular
Rated Output : ~1.0mV/V to 2.0mV/V
Excitation Voltage : 5V to 12V DC (Recommended 10V)
Zero Balance : ±0.1mV/V
Rs 260.00
Specifications :
Input Voltage: 5V
Current Draw: 20mA (Max)
Range: 2cm – 400 cm
Rs 280.00Rs 430.00
Quick Info :
Voltage: 5V
Power Consumption : 65mA
Sensing range : < 120 °, within 7 meters
Rs 280.00Rs 290.00
Quick Info :
Sensor IC: A3144
Output: Digital (active LOW) + Analog
Voltage: 3.3V – 5V DC
Pins: VCC, GND, DO, AO
Detection: Unipolar (south pole)
Range: Up to ~1cm
Indicators: Power + Output LEDs
Compatible: Arduino, Raspberry Pi, ESP32
Rs 280.00Rs 300.00
Quick Info :
Connection type : Normally Open
Actuation Distance (mm) : 15 ~ 25
Connecting cable length (cm) : 30
Rs 290.00
Quick info :
Operating voltage: 3.3V~5V
Interface: PH2.54-3P
Rs 290.00
Quick Info :
On-board TTP224 capacitive touch 4 key IC
On-board 4 road level indicator.
Working voltage: 2 V to 5.5 V DC
PCB board size: 35(mm) x29 (mm).
Rs 320.00
